How do you place a video clip at a particular location in imovie

how do I place a video clip at a particular location in imovie?

You'll probably have better luck with an iMovie question if you ask in the iMovie forum.
Regards

Similar Messages

  • How can I place a video clip in CS6 within an irregular shape

    How can I place a video clip in CS6 within an irregular shape please

    Many thanks. I should have mentioned that I meant for the video to be an irregular shape also. However from what you said I have worked it out so thanks again for quick response. Pete.

  • How do you add a video clip to a slide show?

    How do you add a video clip to a slide show using elements 12?

    You can import some very short video clips into Photoshop and make gifs.  I can import short (10 second or so) .mvi video clips I've taken with my point and shoot camera.
    Use File ->Import->Video Frames to Layers
    CS3 doesn't recognize .mvi files until you enter *.* in the box, hit load, then find the file you want.
    After the file has been loaded, go to Windows, and check Animation.
    After the Animation bar loads, go to the right side arrow, check Make Frames from Layers.
    Then Save for Web and Devices, and you've got your gif.
    I find it much easier to use the separate software.

  • How do you speed up video clips for Imovie 8?

    How do you speed up video clips for Imovie 8?

    Do you mean get 55 minutes of real time footage to show in only 55 seconds?
    One way that might work but it will take a fair bit of work in multiple repeated steps.
    Select all the footage on the timeline and then use the Turtle/Rabbit slider to speed it all up to the maximum speed allowed. This of course won't be any where close to 55 seconds.
    BUT... export your movie back out to video tape or to a full quality DV format quicktime file. This speeded up version becomes "normal" time. Now reimport to iMovies. Since this is now normal speed as far as iMovie is concerned, you can again use the slider to speed the whole thing up to the max.
    Now just repeat as often as needed to get it as fast as you want. Export back out, reimport, adjust speed, export, import, adjust, etc.
    Patrick

  • How do I get 2 video clips from Canon IXUS 75 into iMovie?

    How do I get 2 video clips from Canon IXUS 75 into iMovie?  I've tried several different things, but nothing seems to work...  I'll appreciate any help..  Thank you in advance.  (I do this all the time, but with a different camera...)  ;-/

    Thank you -- I was able to find an answer in the previous posts and I just figure it out!  ;-}

  • How do you add additional video clips to a multicamera sequence after aligning multiple cameras?

    We shoot extended videos (1-2 hours in length)  all the training videos I've seen for CC walk you though aligning the inital cuts and then editing, but they don't say how to add the rest of the clips from that session to each video track.  Any tips?

    Thanks Mark - That worked.  By the way, in case there are any other rookies out there trying to create a multicam sequence like this, make sure that you 1) create the MultiCam Source Sequence and then 2) right click on the Multicam sequence icon in the project window and then 3) choose open in timeline.
    Once the project is open, verify that the camera views are sync'd and then drag the follow on video clips to the end of the appropriate video track.  Once that is done, right click on the Multicam icon again and choose New Sequence from clip and your complete project will be ready to edit.
    Thanks Mark for the quick response.

  • How can you place a video with no controls? HTML5 CSS3

    I would like to just place my video (MP4) and have it come into the page actual size with no controls, set to autoplay and loop. Can anyone tell me how to write the code to accomplish this??  Thanks in advance!!

    it's really a banner type image that I created in Flash... it's not a "real video" I converted it to video so it would play on OS devices.
    I take it you might not have an iOS device.  Even if you hide controls, the OS has it's own controls for videos that will show up for users.  Seeing as how Adobe just gave Flex to Apache this morning ( http://www.macworld.com/article/163699/2011/11/adobe_donates_flex_to_apache.html ), you might want to try Google's tool for exporting Flash as HTML5 for your banner if it's an animation you want to play.  If it's a rotating banner, I'd recommend a JQuery option.
    http://blogs.adobe.com/jnack/2011/11/google-flash-developers-export-to-html5-with-new-swif fy-extension.html
    It should work with CS4 and above.

  • How do You Place an edited clip in a Theme

    After importing my video to iMovie I edit my clips. Next, I tried to place the edited clip into a Theme. However, every time I place the edited clip into a theme it reverts back to the orginal clip.
    Is there a way to place an edited clip into a theme without it reverting back to the orginal clip?
    Thank U
    Tim
    iMac    

    There's a bug in iMovie 6 where video placed in a drop zone is rendered from the start of its Media FILE, not from the start of the CLIP. So if you split a clip in half and drag the second half into the drop zone, iMovie uses the first half.
    The solution is to export the second clip to a Full Quality movie and drag that movie into the drop zone. After the theme renders you can discard the Full Quality movie.
    (To export just one clip, check the "Share selected clip only" checkbox in the Export window.)
    Karl

  • How do you make one video clip constantly switch colors?

    I am trying to make it that one video clip switches from one color then to another color then to another? I also don't want to break up the clip into multiple clips then just change the color on each sub clip because when I tried that, it wouldn't load well in playback because there were so many effects in a couple of seconds. Please help me, thanks!

    When you say 'switch from one color then to another color' do you mean you want the clip to show in shades of a single colour ranging from black to your colour and for that colour to change, or that you want the colours of the image to cycle so that red becomes blue, yellow becomes green and blue becomes red?
    If it is the 'shades of a single colour' you want, apply the 'Cast' effect from the 'Looks' section of the effects palette and use keyframes to animate the Midtones parameter.
    If you want to colour cycle, apply my free 'Gradient Colorize a4d' effect, edit the colours in the gradient and keyframe the 'Offset' parameter which cycles the gradient colours through the image. If you're interested I could create a free effect that could cycle through the colours in a gradient automatically.
    Download 'Gradient Colorize a4d' from my blog:
    http://alex4d.wordpress.com/2012/03/22/11-colour-fcpx-filters/
    @alex4d

  • How do you put a video clip in the corner of a picture

    I have already replaced the video with the picture and detached the audio. I am trying to put the video clip in the corner of the picture.

    Yeah... I have some question for the iMovie version for MacBook Pro and the iMac on the iMovie for OS X forum. I found some of my answers here:
    https://discussions.apple.com/community/ilife/imovie?view=discussions
    This forum here I use when I have questions for iMovie for iOS, the version of iMovie that runs on iPad/iPhone.

  • How do you rotate a video clip

    Is it possible to rotate a video clip in IMovie or in any other application?

    karenjmccormick wrote:
    Is it possible to rotate a video clip in IMovie or in any other application?
    sure
    http://help.apple.com/imovie/index.html#mov3a884fd3

  • How do I save my video clips/events to an external hard drive with the newest version of iMovie?

    I used to be able to drag the video clips in to my external hard drive once importing them with the older version of iMovie.  Now I'm unable to do so with the newest version.  How do I backup my video clips with the newest version of iMovie?

    Hello tronsonation,
    Thanks for using Apple Support Communities.
    If you want to be using an external hard drive to store your iMovie data, then all you need to do is move your iMovie library to the external drive.  To learn more about this, please review the information in the link below.
    Move your iMovie for Mac (2014) library - Apple Support
    Have a good one,
    Alex H.

  • How do you match the video duration of multiple clips to match the audio?

    If 'Windows Movie Maker' could do this..... come on! There's gotta be a way. I have multiple video clips that equal a duration of say 10 minutes. My audio file (that consists of 2 songs) equals say 7 minutes. HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?

    HOW DO I SELECT ALL VIDEO CLIPS AND MATCH THEIR TOTAL DURATION TO EQUAL THAT OF THE AUDIO?
    It's called "editing".
    If you don't want to do it, hire someone or fire up Windows Movie Maker.
    On the other hand, Apple seems to be headed down the "design the software for the lowest common denominator" path lately. Perhaps Final Cut X can do this? You might ask over in that forum.
    x

  • I have downloaded video to iPhotos but how do you get the video to iMovies

    I have downloaded video to iPhotos but how do you get the video to iMovies

    In iMovie look in the Event Library. You should see an Event named "iPhoto Videos" (assuming the videos are compatible with iMovie).
    Each time you open iMovie it will look for any new videos in iPhoto and place thumbnails in the iPhoto Videos Event. You will be given a choice as to whether you want the thumbnails generated now or later. The thumbnails will appear in chronological (date) order in the Event window. Note that the clips themselves are not actually imported to iMovie - they are simply referenced by iMovie (that is, iMovie points to the clips in iPhoto).
    Drag clips (or parts of clips) to a project. To start a new project, select File > New Project from iMovie's menu.
    Please ask if you need more advice. Otherwise, click on Help > iMovie Help in the menu. There you will find plenty of good information about how to use iMovie, including short video tutorials.
    John
    Message was edited by: John Cogdell

  • How do I insert a video clip into the timeline?

    Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
    I don't want to render the whole movie (convert it into a MPeg2) each time.

    No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
    If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
    The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

Maybe you are looking for