How do you place text and a formula in the same cell?

I'm trying to format a single cell so that there is a label and a sum total together. How do I do this? I'm sure it's easy, but any help is much appreciated.
Example:
Invoice total: $ SUM
Thanks

Hi reychido,
The literal answer your question is Cell A6 contains:
="Invoice Total: "&"$ "&A5
I had to add an extra step. A5 is the SUM of A2:A4, then formatted as Number with 2 decimal places. Without that step, the SUM showed as 56.7
My second example is another way. Cell C5 contains =SUM(C2:C4) and is formatted as Currency.
Regards,
Ian

Similar Messages

How do you I get my iPad to have the same cell phone as my phone?

Under FaceTime and IMessage where it said to be reached at I want my cell phone number there how do I change number?

You can't change the mobile number associated with your iPad to the same as your iPhone. However, if you update to iOS 6, you can associate your iPhone's mobile number with your Apple ID which will allow you to send and receive iMessages on your iPhone, iPad and Mac running Mountain Lion with your iPhone's mobile number.

How do you use RGB And CMKY colours in the same document for print?

I want to create a piece of work with a navy blue back ground and a font on top but don't want to change the colour just the RGB to CMKY mode so the colour looks slightly brighter sitting on top. I have seen this printed out in black and looks amazing but don't know how to create it. Could someone please help?

Sophie,
Your File>Document Color Mode (along with the Edit>Color Settings) determines how the colours are interpreted, more specifically fitting it into the colour gaumt in question. CMYK Color (Mode) had a narrower gamut of less bright colours, RGB has a wider gamut of more vivid colours.
Your Window>Color palette expresses the colours in terms of your chosen combinations of CMYK or RGB (or a few others) values, which are then interpreted by the colour mode.
This means that you can have four combinations: you may insert CMYK values in both CMYK and RGB mode, and you can insert RGB colours in both CMYK and RGB mode.
You will find that most CMYK/RGB values will change once saved, owing to the fundamental differences between the two colour modes.

Can we put text and button together in the same cell of ALV?

Can we put a button and text in a cell of ALV Grid?
Requirement in detail:
Material Description + button - when the button is clicked, it opens up a screen to enter text.
I able to open the screen ob button click but..
when I concatenated the material description and an icon, it showing garbage in ALV output.

Hi,
I think it is possible..check this code..I believe this also depends on the GUI version..Mine is 6.40 patch level 32....in my output it is showing icon with the text in one column...
TYPE-POOLS slis.
INCLUDE <icon>.
TYPES: BEGIN OF type_data,
         matnr TYPE matnr,
       END OF type_data.
DATA: t_fcat TYPE slis_t_fieldcat_alv.
DATA: s_fcat TYPE LINE OF slis_t_fieldcat_alv.
DATA: t_data TYPE STANDARD TABLE OF type_data.
DATA: s_data TYPE type_data.
* Field catalog.
s_fcat-fieldname = 'MATNR'.
s_fcat-row_pos    = '1'.
s_fcat-ref_tabname = 'MARA'.
s_fcat-ref_fieldname = 'MATNR'.
APPEND s_fcat TO t_fcat.
CONCATENATE icon_negative 'test matnr' INTO s_data.
APPEND s_data TO t_data.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
    it_fieldcat   = t_fcat
TABLES
    t_outtab      = t_data
EXCEPTIONS
    program_error = 1
    OTHERS        = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Thanks
Naren

How to export an album and keep images in the same order in elements 11 mac

I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos

Thanks for the tip, Michel
It worked like a charm…
cheers Jos
Op 28 okt. 2013, om 18:49 heeft MichelBParis <[email protected]> het volgende geschreven:
Re: How to export an album and keep images in the same order in elements 11 mac
created by MichelBParis in Photoshop Elements - View the full discussion
JosU a écrit:
I made an album of my trip to Australia (lots of pictures) and changed the order of the images (not the same as shooting order) and when I export the images in the album to a folder or memorystick, the images are copied to that place but I lost the album order of the images.
How can I prevent that, without having to renumber al 500 images separatly?
Gr Jos
The order in album is only kept in the organizer database, so the only way not to lose that order is to rename files.
If you are using the 'export' function, select your album in custom order, select all photos and in the dialog, choose to rename with a common base name.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5794538#5794538
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5794538#5794538
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5794538#5794538. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do i have landscape and portrait slides in the same keynote file?

how do i create landscape and portrait slides in the same keynote file?

You cant, its one or the other not both, the slide size setting is for the whole presentation, not for individual slides.
The slide format is chosen to match the display the presentation is shown on. I have presentations showing on vertical, horizontal, square, circular and iregular shaped screens with rear projection, but a single format must still be set.

How to link two text elements to always read the same...

I have an InDesign Doc with a Master Page containing a margin and some graphic imagery that I want displayed on every page.
This works great, so that when I edit the master all other pages are updated.
However, within the master design there is a header that reads the 'Title' of the document, and the 'Version number'
This same information is presented on the front cover page of the document.
What I want to do, is to allow the header to automatically update to whatever is entered in the Front Cover Page text, as this will be the first field completed.
Is this possible?
Many thanks
Max

P Spier wrote:
Thanks, Peter.
The OP didn't indicate anything about a Book, or needing to cross documents, but the extra information is certainly helpful.
I'm not sure I personally trust cross-document cross-refernces all that much, though. There are some reports of them breaking. I might be more inclined, for sake of safety, to repeat the text on page one of each file and use the variable. The text can be in a non-printing frame, if necessary, and that frame need only have some portion inside the bleed area or page boundary if no bleed is specified. The downside to this, of course, is if you edit one, you must edit all, while the cross-reference is a one-shot deal.
My 2-cents addition was added in hopes of saving some frustration for anyone who might want to achieve the result in a book of files.
If x-refs were as robust as they should be, you wouldn't need to mistrust them, of course.
More to the point, err, FrameMaker has global text variables that work across files in a book, so the <$booktitle> text variable, for example, is the same in all component files. You can do this in ID if you post a feature request at AdbeWish.
I'm not sure if placed external text files are more or less reliable than cross-references, but it's worth a try to enable (check) Preferences > File Handling > Links > Create Links When Placing Text and Spreadsheet Files, and place that text file into a master page text frame that applies a desired paragraph style, so that when/if links are updated, the formatting is reapplied.
Global text variables, for those folks who might benefit from them, are certainly worth the time and effort for those folks to file a formal request.
Regards,
Peter Gold

Can you use iTunes match and not get duplicates if you maintain mp3s and aiffs files of the same song in either the same or separate libraries?

I maintain a collection of aiff files and mp3 files of the same music.
Aiff for home listening and Mp3 for my devices.
I can arrange these in the same or seperate libraires.
Will "itunes match" duplicate the songs in the cloud if they in the same or seperate libraies on the same mac?
If not, is anyone aware of how to manage seperate Mp3 and Aiff libraries so as not to get duplicates in itune match?
All assistance is appreciated.
Thanks!

Hello mracole,
I checked my "purchases" and the 7/19/13 purchases don't show up. However, the earlier versions from usually several years back...the ones that are Matched...often do show up in my Purchases. I suspect that somehow those REALLY purchased several year old versions were deleted and redownloaded by me so I could change them to the 256 kbps versions under iTunes Match. They were probably 128 kbps versions originally when purchased.
Why the earlier versions that were really purchased are now identified as Matched is puzzling.
Why I now have Purchased versions from 7/19/13 is puzzling too...especially since these versions do NOT show up in my purchases.
Calling Apple Support if a good idea unless someone can explain this mystery. I might even take one of my laptops to the Apple store and show a Genius.
Thank you very much for taking the time to respond, Mr. Luigi

How do I make Organizer and Editor open at the same time?

I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
Thanks,
K

Create Desktop shortcuts for the Organizer and the Editor:
The Editor's executable is:
"C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
The Organizer's executable is:
"C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
Ken

How to use Forms 5 and DevSuite 10g in the same machine

Hello everybody,
I have installed forms 5 and IDS 10g in one machine and both the versions of the forms were working simultaneously. Now I have un-installed both the versions of the forms and re-installed in the same machine. Installation was successful. but I am not able to connect to the database in forms 5. It shows TNS could not resolve service name. TNS is created in both the versions with same name as well as different name. The IDS is working fine. Please help.
Thanks and regards
Sukanta sarkar

Sukanto,
What error are you getting? One potential problem you will have with more than one version of Oracle Dev Suite installed is keeping the TNSNAMES.ORA synchronized. I've found the easiest solution to this problem is to add the TNS_ADMIN registry key to each Oracle Home so I can share a single copy of the TNSNAMES.ORA file. You can add this entry by starting the Window Registry editor (regedt32.exe or regedit.exe) and navigate to the following registry hive:
HKEY_LOCAL_MACHINE => SOFTWARE => ORACLE => HOME? (where ? represents the number of the Oracle Home, eg., 0-9).
In your example, Forms 5 should be in HOME0 and IDS 10g should be in HOME1. Open each home and add a new "String Value" and name it: TNS_ADMIN. After you have added the new String Value entry, edit the String Value and enter the path to the copy of your TNSNAMES.ORA that is working. Then do the same thing with HOME1 and exit the Registry. You should be able to connect to your database with Forms 5 and IDS 10g. Normally, changes to the registry do not require you to reboot your computer, but I have seen where this is necessary - though not very often.
Note: Always ensure you have a BACKUP of the Windows Registry before you make any changes. If you uncomfortable modifying the Windows Regisitry, then I don't recommend you make this change.
Hope this helps.
Craig...

How do you keep two users logged in at the same time?

How do I keep two users logged in at the same time to be able to access home sharing?

Fast User Switching in Users & Groups or Accounts preferences in Login Options.

Using a button and a textfield in the same cell of a table

I have been struggling with this problem for ages, please someone help...
I am trying to implement a table similar to NetBeans property sheet editor where you have a textfield and a button with "..." in the same table cell. The button is used to invoke a custom editor.
I have most things working, custom renderers, custom editors and such.
However, the focus interactions on the table seem completely screwed. Clicking in the editor causes the cell to switch to editing mode as expected. Pressing cursor down or tab, which should close the editor and move focus to the next cell down does not work - the editor closes but the focus disappears to a completely different component elsewhere on my GUI.
My textfield and button are on a JPanel, and I return that JPanel when getTableCellEditorComponent is called.
If I switch out the JPanel and instead return the textfield, the focus works as normal.
I've even looked at the NetBeans source but I can't work out what their trick is.
Any tips would be gratefully received.
TIA.

Thanks for your time, Jeanette...
Here is a bare-bones example of the problem I'm having. I'm running on JDK1.4 and JDK1.3.1_02.
I've tried some tricks (hacks) with getNextFocusableComponent and requestDefautFocus and such but with no success.
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
* This example shows a keyboard/focus navigation problem when using a JPanel
* as a table cell editor. The JPanel contains a textfield and a button.
* Click in the editor to invoke it, and tab-off (or press cursor down). The
* edit ends, but the focus disappears rather than moving to the next cell in
* the table.
* Change the line that returns the panel to return a text field instead, and
* all is well.
public class Test
public static void main( String[] args )
    new Test();
public Test()
    JFrame f = new JFrame();
    f.setContentPane( new TablePanel() );
    f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
    f.setSize( 800, 600 );
    f.setVisible( true );
class TablePanel extends JPanel
    TablePanel()
      setLayout( new BorderLayout() );
      JTable table = new JTable();
      table.setDefaultEditor( Object.class, new MyEditor() );
      table.setModel(
        new DefaultTableModel(
          new Object[][]
            {null, null},
            {null, null},
            {null, null},
            {null, null}
          new String[] { "A", "B" } ) );
      add( table, BorderLayout.CENTER );
class MyEditor extends AbstractCellEditor implements TableCellEditor
    private JComponent myEditorPanel;
    private JTextField myTextField;
    MyEditor()
      myEditorPanel = new MyEditorPanel();
      myTextField = new JTextField();
    public Object getCellEditorValue()
      return null;
    public Component getTableCellEditorComponent( JTable table, Object value,
                                                  boolean isSelected,
                                                  int row, int column )
      return myEditorPanel;   // Problems...
//      return myTextField;   // Keyboard and focus as expected
class MyEditorPanel extends JPanel
    JTextField tf;
    MyEditorPanel()
      setLayout( new BorderLayout() );
      tf = new JTextField();
      add( tf, BorderLayout.CENTER );
      add( new JButton( "edit" ), BorderLayout.EAST );

Border and font setting for the same cell

I have writen a label in an excel cell using a font that I created (called "wf" - see code below).
I also want to put a left thick border to the same cell.
How can I do that?
ps: I call this function from "main":
private static void writeDataSheet(WritableSheet s)
WritableFont wf = new WritableFont(WritableFont.ARIAL, 10, WritableFont.BOLD);
WritableCellFormat cf = new WritableCellFormat(wf);
Label l = new Label(1,0,"Last Name",cf);
s.addCell(l);
What code should I add to the upper function in order to set a left thick border to my cell?

this issue has been solved

How can I load more then 1 img within the same Cell of datagrid?

Hi
I am using Flash CS3 datagrid component, I want to show more than one image in the same cell.
I m using LoadCellRenderer class extends UILoader implements ICellRenderer,
but it loads only one image in cell.
can any one guide me?
Thanks in advance.

Hi, kennethkawamoto2
I go through the on-going thread. and apply the code also but result is same,
Data Grid inbuilt Roll over , selected, selection -- events are disappear after apply custom CellRenderer class.
Any idea Why this happend?

How do you place text in a text frame, but with autoflow?

I woudl like to place a tagged text file on a text frame rather than on a page, so i can put the contents into a pre-defined text frame, but still have the number of pages extended unitl the entire tagged text content is show.
I can get autoflow with Page place() function, which takes an option to turn on autoflow. However, this creates a new text frame, and I'd like the tagged text to go into a particular text frame. Unfortunately, the TextFrame place function does not seem to have an autoflow setting, that will duplicate the current page and flow text into the new page.
Thanks,
Read Roberts

Hm,
I would check for overflow, if then, create the new page, create your 'particular textFrame', set nextTextFrame of tf1 to your 'particular textFrame'
Hans-Gerd Claßen

How do you place text and a formula in the same cell?

Similar Messages

Maybe you are looking for