How do you position side by side tables so they print correctly on separate sheets?

How do you position side by side tables so they print correctly on separate sheets?

Hi CJ,
I just saw this solution by Jerry:
https://discussions.apple.com/thread/5653936?tstart=0
It is non-intuitive how to get there, but Menu > File > Print... to get to Print Preview. Then Click on Print.. at bottom right. This does not print, but opens a dialogue where you can choose to Open PDF in Preview (click on PDF bottom left).
Have fun!
Regards,
Ian.

Similar Messages

  • How can we delete SID table data and Text table data

    Hi,
    How can we delete SID table data and Text table data of any
    InfoObject.

    Hi,
    Go to transaction SE14, give the technical name if the table:
    /BIC/T<InfoObject Name>   for Text Table
    /BIC/S<InfoObject Name>  for SID Table
    Select "Table" in the given 4 options below  &  hit Edit button.
    in the next screen select "Direct"
    & also select "detele data" radio button.
    & hit  "Activate & adjust database".
    this will delete the complete data from the tables.
    Note: before deleting the SID's make sure of the consequences & after effects.
    Also the SID gets generated the next time you load master data/transaction data only for those records which were loaded..
    Regards,
    Iliyas

  • How do you position tags in a spreadsheet? Can I eSign more than one tab in a spreadsheet?

    How do you position tags in a spreadsheet? Can I eSign more than one tab in a spreadsheet?

    Using text tags
    https://workspaces.acrobat.com/app.html#d=Bi-SZ3cbVCHwiWBBp-7G7g
    but spreadsheets are quite difficult to predict as they don't typically have a page size defined. If you can do this in Word it'll be easier.
    or convert to pdf before uploading to EchoSign.
    You an upload a spreadsheet with multiple tab and place tags on each tab and all will get converted.

  • How to retrieve the values from a table if they differ in Unit of Measure

    How to retrieve the values from a table if they differ in Unit of Measure?

    If no data is read
    - Insure that you use internal code in SELECT statement, check via SE16 desactivating conversion exit on table T006A. ([ref|http://help.sap.com/saphelp_nw70/helpdata/en/2a/fa0122493111d182b70000e829fbfe/frameset.htm])
    If no quanity in result internal table
    - There is no adqntp field in the internal table, so no quantity is copied in itab ([ref|http://help.sap.com /abapdocu_70/en/ABAPINTO_CLAUSE.htm#&ABAP_ALTERNATIVE_1@1@]).
    - - Remove the CORRESPONDING, so quantity will fill the first field adqntp1.  ([ref|http://help.sap.com/abapdocu_70/en/ABENOPEN_SQL_WA.htm])
    - - Then loop at the internal table and move the quantity when necessary to the 2 other fields.
    * Fill the internal table
    SELECT msehi adqntp
      INTO TABLE internal table
      FROM lipso2
      WHERE vbeln = wrk_doc1
        AND msehi IN ('KL','K15','MT').
    * If required move the read quantity in the appropriate column.
    LOOP AT internal_table ASSIGNING <fs>.
      CASE <fs>-msehi.
        WHEN 'K15'.
          <fs>-adqnt2 = <fs>-adqnt1.
          CLEAR <fs>-adqnt1.
        WHEN 'MT'.
          <fs>-adqnt3 = <fs>-adqnt1.
          CLEAR <fs>-adqnt1.
      ENDCASE.
    ENDLOOP.
    - You could also create another table with only fields msehi and adqntp and then collect ([ref|http://help.sap.com/abapdocu_70/en/ABAPCOLLECT.htm]) the data to another table.
    Regards,
    Raymond

  • In ADF how can i insert data in multiple table if they have foreign key

    I have started working on ADF and can anybody inform me in ADF how can i insert data in multiple table if they have foreign key,please?
    Thnak you very much.

    Hello,
    Still no luck.I am surely doing silly mistakes.Anyway,Here are my workings-
    1> student_mst (id(pk),studentname) and student_guard_mst(id(fk),guardianname)
    2> created EO from both of the tables,made id in both EO as DBSequence and an association was also generated.
    3> i made that association composite by clicking the checkbox
    4> i created 2 VO from 2 EO.
    5> put those VO in Application Module.
    6> dragged and dropped 2 VO on my jspx page and dropped them as ADF Form.
    Now what to do please?

  • How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

    How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

    Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
    I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

  • In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

    In LiveCycle Designer ES4 how do you remove tabs within a page once they have been created?

    Emma,
    Take a look at the troubleshooting tips on this page from the Infosemantics website:
    http://www.infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/troubleshooting-widg et-issues
    Pay particular attention to the section entitled: "My drag and drop question works correctly sometimes, but not other times. "
    From the appearance of your slide, it looks like you may have removed some of the components from the quiz slide that are necessary for it to function correctly.  Try the test that this section of the troubleshooting suggests so that you can see if this is the case.  If it turns out that you have deleted some items, you'll need to recreate your quiz slide to get them back again.
    Hope this helps.

  • How to look at sid tables generated for an ods?

    Hi all,
    There  is atrns code : listschema which enables to have a look of the sid tables generated for infocubes.
    Is there any trsn code where we can see the list of sid tables generated for ods. if not let me know the procedure how to look at the sid tables generated for ods.
    regds
    hari

    hi,
    i think u will try like this:
    go to transaction code SE11
    TYEP UR NAME LIKE THIS:
    EX: /BIC/AODS_CUS00XXXX
    BI: MEANS business defined
    C: customer
    0 : SAP defined
    A: Active data table of ods
    TYPE LIKE THIS : /BIC/ODS NAME * (STAR)
    YOU MAY GET VALUES:
    THANKS, KR

  • How do you position an image inside a photo box?

    I'm trying to create a 20 page 16x8 book and I cannot figure out how, after putting a photo box on the page, and dropping an image into it, how do I move the image around inside of it. For instance if I create a square photo box, how do I position a 3:2 image inside of it?

    Double click it.
    RB

  • How do you position a Flash using CS5???

    I just started using Flash CS5 and whenever I publish something, the Flash winds up in the upper left corner of my browser. WTF?
    There's no code on the page that lets you "position" the Flash. I have no way of telling the Flash which div it belongs in. What's going on here?
    I've searched and searched and everything that talks about swfobject doesn't seem to address my problem... Which is driving me crazy.
    There's no clear way to tell the Flash where to go. And no one's talking about it?

    So I figured out that the Flash is supposed to go wherever you place the <div id="flashContent">,
    although I couldn't find any documentation saying that.
    Anyway, for some reason on my page the Flash will not stay put. It wants to butt up to the upper left corner of a wrapper div, a few divs up.
    No idea why. The page is here: http://www.h2xrx.com/site/color_options.php but I'm working on it so it may change here and there.

  • How do you add the motion path of a tracking point to a separate clone stamp?

    How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
    Is there a way to keep the clone stamp's initial position and then add the path onto it?
    I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.

    I have spent two days trying to find a solution to this exact same problem. I have seen some overly complex solutions that probably work but trying to figure out the explanations is like trying to understand someone describe drag coefficients of rotary wing aircraft. While I am sure they work, they are way above my comprehension. I wanted an intuitive and straight forward solution for something that shouldn't require some arcane technique to fix.
    What I did:
    1) I used the Clone Stamp tool to paint over the spot on the wall I wanted to remove.
    2) picked a more easily discernible point of reference for Tracking. In my case, I used a poster on the wall.
    3) As per the instructions here, https://www.video2brain.com/en/lessons/removing-an-object-with-clone-stamp, I pasted the Attach Point data from the Tracker into Clone -> Transform - > Position 
    However, that didn't work for me as the object I was painting was not the object I was tracking. The solution from the video was simply moving my cloned spot to the tracked object instead of leaving it where I wanted it. So...
    4)  I then manually adjusted the Anchor Point of the Clone back to the original spot I wanted to cover.
    I played footage and the cloned region successfully moved with the spot I was covering.
    This is what I was able to figure out. I'm not an advanced user. I only use After Effects every couple of months when I need to fix minor things in footage, so I've only learned to use what techniques I need for the job at hand. No doubt, experienced users may shake their heads at my simplistic fix. I'm sure my technique would be wholly inadequate for situations far more complex than fixing spots on a gray wall, which is why my eyeballs cross when reading suggestions that seem way more involved than one would expect for something as seemingly minor as this. It's just a spot! It should be super easy to remove, right? Well, that's what I was looking for and that's what I came up with. I hope it helps.

  • How can you get your photos in the order they are in your computer

    How can you get your photos synced to your phone in the same order as the file on your computer?

    The iPhone Photos app orders photos by date.

  • How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

    Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
    This pritner is fully compatible with Airplay per HP site
    My dad has no PC
    He knows the router passcode.
    What is the process?
    Will the HP printer to be purchased shortly work out of the box w/no drivers
    How do you set the printer up to work on the iPad?

    Richard-
    I have the HP D110 AirPrint printer.  As I recall, it was configured in Ad Hoc network mode when first received.  It was necessary to set it up to access my WiFi router before I could use it with the internet connection.  Then, as part of the setup process, it downloaded the latest firmware update from HP.  This was all done from the printer control panel, and no PC was needed.
    As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer.  Go ahead and try it, it may work.  If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
    By now, you should realize that a PC is needed to update the iPad.  I assume your Dad visits you when he needs use of a PC.
    Fred

  • How do you download the software for hp 460 mobile printer

    Can't seem to get to a dowload page to download the software for this printer.  We don't have the CD!

    Hello @DLP1!
    Thank you for posting on the HP Forums!
    I would be happy to provide some assistance that may help resolve the issue!  Unfortunately there is no software developed for your printer on Mac version 10.10.  You should still be able to use the printer from the computer through a USB connection.  
    I recommend following this link "HP Printers - Installing a Mac Printer Driver Using Apple Software Update" for the instructions on how to add the printer to your computer using generic drivers!
    Please post back and let me know how everything goes!
    Cbert
    I work on behalf of HP.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

  • How do you consolidate a downloaded albumn. Sometimes they spit into several pieces.

    Sometimes different artists are featured on the same album. The downloaded albumn break into pieces. How do you consolidate?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

Maybe you are looking for