How do you post imovie online without using youtube?

I need to post a video of my students online, but youtube can not be accessed through the school. I used to post videos through blogspot, but now with imovies, it does not work. Does anyone know a free and safe way to post videos online?

VIMEO is free if you keep your upload volume below a certain level.
FACEBOOK is also free and has the advantage that it is easy to control access to those you have designated as friends.

Similar Messages

How do you create an array without using a shell on the FP?

I want to be able to read the status of front panel controls (value, control box selection, etc.) and save it to a file, as a "configuration" file -- then be able to load it and have all the controls set to the same states as were saved in the file. I was thinking an array would be a way to do this, as I have done that in VB. (Saving it as a text file, then reading lines back into the array when the file is read and point the control(s) values/states to the corresponding array element.
So how do I create an array of X dimensions without using a shell on the front panel? Or can someone suggest a better way to accomplish what I am after? (Datalogging doesn't allow for saving the status by a filename, so I
do not want to go that route.)

Thanks so much m3nth! This definitely looks like what I was wanting... just not really knowing how to get there.
I'm not sure I follow all the icons. Is that an array (top left with 0 constant) in the top example? And if so, that gets back to part of my original question of how to create an array without using a shell on the FP. Do I follow your diagram correctly?
If I seem a tad green... well I am.
I hope you understand the LabVIEW environment and icons are still very new to me.
Also, I had a response from an NI app. engineer about this problem. He sent me a couple of VI's that he threw together approaching this by using Keys. (I still think you are pointing to the best solution.) I assume he wouldn't mind m
e posting his reply and the VI's for the sake of a good, thorough, Roundtable discussion. So here are his comments with VI's attached:
"I was implementing this exact functionality this morning for an application I'm working on. I only have five controls I want to save, but they are all of different data types. I simply wrote a key for each control, and read back that key on initialization. I simply passed in property node values to the save VI at the end, and passed the values out to property nodes at
the beginning. I've attached my initialize and save VI's for you to view. If you have so many controls that this would not be feasible, you may want to look into clustering the controls and saving the cluster as a datalog file.
Attachments:
Initialize_Settings.vi ‏55 KB
Save_Settings.vi ‏52 KB

How can you backup your iPhone without using the front button?

My front button doesn't work again. Had this fixed a week ago and it stopped working again.
So how do I backup the iPhone without being able to close the email account it is in now and get to the Settings without using the front button?

Restart your iphone by using the power button. After the restart you will be able go to the settings and enable assistive touch!

On the iMac Retina how do you scale to 5K without using a third party app?

On the Apple website there is a statement suggesting that using FCPX a 4K video can be seen in native resolution and still have room for timeline and tools etc. Without resorting to use of a third party app how do you adjust an iMac retina OSX and FCPX to achieve this?

Thanks for your comment
I would have thought so too however having now visited two local Apple stores and asked staff how to see a 4K video at full resolution none of them could show me. The resolution settings of the iMac Retina are way below the full 5K. At optimised for Retina its understandably half but even when settings are adjusted to highest resolution it is nowhere near 5K - it gets scaled to somewhere between 3-4K. There is talk of "content awareness" but this didn't seem to have much impact when using Quicktime or FCPX to view the sample 4K video files (checking info on these files reveals they are 4K images but when viewed the resolution was lower).
I am aware third party apps (such as RDM) can be used to get greater control over what resolutions the display gets run at but from the description on the Apple website I would expect this adjustment to be able to be made in OS X.
Quote from Apple iMac Retina pages:
"The sheer number of pixels on the new iMac with Retina 5K display lets you view the latest high-resolution 4K video at 100 per cent, while still leaving plenty of room for your assets and timeline."
So how do you achieve this? The iMac Retinas I tried in store did not show this.

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How do you unlock your ipad without a passcode if it wasnt setup through itunes

How do you unlock your ipad without a passcode if it wasnt setup through itunes

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can you link up online files to a offline file

I have asked this question before, but did not get the answer I needed. So I though for a bit and came up with a more understand able question and how to explain it and here it is:
What I want to know, is how can you link an online html link to an offline swf file? Now this is needed because people need to download the swf file in order to use it, I have tried this: file://swf/Lr1.swf (link), but it doesn't work it comes up with not found. So can any one help?

drunkmafia wrote:
I have asked this question before, but did not get the answer I needed. So I though for a bit and came up with a more understand able question and how to explain it and here it is:
What I want to know, is how can you link an online html link to an offline swf file? Now this is needed because people need to download the swf file in order to use it, I have tried this: file://swf/Lr1.swf (link), but it doesn't work it comes up with not found. So can any one help?
Personally I think you are going about this all wrong. I believe someone recommended to you in a previous post to look into the HTML5 ( http://forums.adobe.com/thread/874917 ) you need to end up creating the site with Adobe AIR as opposed to the way you are going about doing it. That would be creating an application like Tweetdeck that connects to the internet and uses interactive elements. http://www.adobe.com/devnet/air.html
If you want to link a file within a Flash document you would receive a quicker and more in depth answer in the Flash forum as it will require ActionScript.
http://forums.adobe.com/community/flash
It sounds like you have a ton of ideas, but your lack of information suggests that 1. you don't have all the knowledge necessary to get the project off the ground and 2. your reluctance to share it suggests that you have an idea that you feel the program is proprietary. Given that this is the case you might be best served looking for an experienced Flash or AIR developer to help get your ideas going in motion. There is nothing wrong with trying to learn but the information you are giving up to go on is very broad and unfortunately it does not appear that you are getting the answers you are looking for.

How do you post images in these forums

I've been wondering for a while. How do you post like a screen shot on these forums (so I can better illustrate me questions.)

Hi Caleb!
How To Post Images In  Discussions
Create a Screen Shot of the image you wish to post.
Upload the image to an online storage facility, like one of these linked to below.
Flickr
ImageShack
PhotoBucket
Twango
Then use HTML formatting, to insert the URL of the location.
Use this format <img src="Insert URL Here">
Keep the images small, and unobtrusive, when possible.
You can also just post a Link/URL, to the image location, using this format:
<a href="Insert URL Here">Type Title Here</a>
Have Fun!
ali b

How do you construct a web form using coldfusion??

How do you construct a web form using coldfusion?? any
examples?
thanks in adv.

A sample Form:
<cfform action="CCARProc.cfm"
enctype="multipart/form-data" method="post" name="CCAR"
onsubmit="return verify()">
<table width="730" border="0" cellpadding="2"
cellspacing="1" align="center" class="unnamed1">

<tr valign="top">
<td colspan="3" bgcolor="#F2F2F2">Name Of
Requester(<font color="red">*</font>)</td>
<td width="402" bgcolor="#F2F2F2"><cfinput
type="text" name="Requestor_Name" size="15" value="#REQNAME#"
maxlength="25" >
MTABT Email(<font
color="red">*</font>)
<cfinput name="Req_Email" type="text" size="8"
maxlength="20" value="#ReqEmail#"
>@mtabt.org</td></tr>
<tr>
<td colspan="3">Requester Telephone #(<font
color="red">*</font>) </td>
<td><cfinput type="text" VALUE="#REQPHONE#"
name="RPhone" size="12" maxlength="12" message="Requester Phone
cannot be blank / Invalid Entry!" required="yes"
validate="telephone"> [e.g. xxx xxx xxxx or
xxx-xxx-xxxx]</td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Facility(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2">
<cfselect name="Facil">
<option value="2B">2B </option>
<option value="BBT">BBT </option>
<option value="BW">BW </option>
<option value="CB">CB </option>
<option value="HH">HH </option>
<option value="MP">MP </option>
<option value="QMT">QMT </option>
<option value="RI">RI </option>
<option value="TM">TM </option>
<option value="TB">TB </option>
<option value="TN">TN </option>
<option value="VN">VN </option>
</cfselect>
</td>
</tr>
<tr>
<td colspan="3">Department(<font
color="red">*</font>)</td>
<td><cfselect name="Dept">
<option value="Contracts">Contracts </option>
<option value="Engineering">Engineering
</option>
<option value="Executive Office">Executive
Office</option>
<option value="Finance">Finance </option>
<option value="General Counsel">General Counsel
</option>
<option value="HS">HS </option>
<option value="HR">HR </option>
<option value="ISD">ISD</option>
<option value="Legal">Legal </option>
<option value="Labor Relations">Labor Relations
</option>
<option value="Operations">Operations </option>
<option value="Payroll">Payroll </option>
<option value="Planning & Budget">Planning &
Budget </option>
<option value="Procurement & Mtrl">Procurement
& Mtrl </option>
<option value="Purchasing">Purchasing </option>
<option value="Revenue Management">Revenue Management
</option>
<option value="Staff Services">Staff Services
</option>
<option value="SD">SD</option>
<option value="Technology">Technology</option>
</cfselect></td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">Division(<font
color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="Div"
type="text" size="20" maxlength="25" VALUE=""></td>
</tr>
<tr valign="top">
<td height="27" colspan="3" >Justification(<font
color="red">*</font>)</td>
<td bgcolor=""><textarea name="Justi" cols="50"
rows="3" wrap="VIRTUAL" ></textarea> </td>
</tr>
<tr>
<td colspan="3" bgcolor="#F2F2F2">VP Approval
By (<font color="red">*</font>)</td>
<td bgcolor="#F2F2F2"><cfinput name="VPAppFName"
type="text" size="20" maxlength="25" VALUE="#VPFName#">
MTABT
Email(<font color="red">*</font>)
<cfinput name="VPE" type="text" size="8" maxlength="20"
value="#VPEmail#" >@mtabt.org</td>
</tr>
<tr>
<td colspan="3" valign="top"
bgcolor="#F2F2F2"></td>
<td colspan="2" rowspan="2" valign="top"
bgcolor="#F2F2F2"><div align="left">
<input name="Submit" type="submit" value="SubmitTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';" >
<input name="Reset" type="reset" value="ReSetTheForm"
class="button"
style="font-size='10pt';color='#663399';font-face='Arial,
Helvetica, sans-serif';">
</div></td>
<td width="90" valign="top"
bgcolor="#F2F2F2"></td>
</tr>
</table>
<div align="right"><span class="style4">Revised(
01.28.05 )</span>
<input name="submitDate" type="hidden"
value="<cfoutput>#DateFormat(Now(),'mm/dd/yy')#</cfoutput>">
</div>
</cfform>

How do you post multiple personal domains to .Mac sub accounts?

I was assured by .Mac tech support that .Mac will host a different personal domain on each of five accounts of a family pak. Now I discover that iWeb is a one-trick pony. I'm stunned that I can't create separate sites and upload them individually. I've never heard of an application that can only create one document!
And I can't even find the data for that ONE document; ~/Library/Application/Domain.sites2 is only 20kb no matter how many photos you've added to the site.
So I guess I have two questions: How do you post multiple domains to sub accounts?
And, where's my data?

The tilde (~/Library/etc.) indicates home folder; that is where I was looking. I did a Spotlite search and discovered that in attempting to backup my data, I'd moved it; Spotlite found it and it was all intact.
Then I discovered I could duplicate Domain.sites2, change the names to Domain de.sites2, and Domain daru.sites2, open daru's site and delete de's, then open de's and delete daru's, and I had two separate sites that I presume I'll be able to upload separately. Once I get .Mac sub groups created...
Seems like a stupid bit of programming; must have hired some windows guys to code it...
Problem I'm having now is, .Mac won't let me set up a sub account in my wife's name because she already has a .Mac ID and a trial account because she joined a .Mac group. Awaiting a reply rom .Mac tech support.
So my question isn't quite answered yet, but it does look like I can post several sites without having to set up separate user accounts. Seems like this could be explained in the help file in plain English...

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

How can I track my iPod without using an app ?

Hey I lost my iPod touch in school and I think one of my classmates took it how do I track it down without using an app ?

The only way to track it at all is to first have enabled an iCloud account on it before it was lost, with the find my iPod setting in that account's setting panel set to "ON".
If that was done, you can log in to your iCloud account in a web browser and you can try to track it. It must be on, and it must have an active wifi data connection to be trackable.
Without an iCloud account already on it though, there is no way to track it.

How can you add a where clause using "OR" with applied ViewCriteria?

[JDeveloper 10.1.3 SU4]
[JHeadstart 10.1.3 build 78]
I am using JHeadstart, but have a question probably more in the ADF area. On the JHeadstart forum I asked:
"I am overriding JhsApplicationModule's advancedSearch in order to be able to search in childtables. I created transient attributes, display those in advanced search and in the overridden method I check if any of these are filled by the user and create a where clause like 'EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>)'. I add this whereclause using ViewObject.setWhereClause.
So far so good and it works. However, if the user selects 'Result matches any criteria', combining setWhereClause and the normal advancedSearch QueryByExample implementation using ViewCriteriaRow do not provide the desired result, since the ViewCriteria and the setWhereClause are AND-ed together, which is fine if the user selects the (default) "Results match all criteria" (everything is AND-ed) but not the "Result matches any criteria", since then every criterium is OR-ed together, except for the setwhereclause criteria and the set of ViewCriteriaRows, they are AND-ed.
I looked if I could specify that a WhereClause will be OR-ed to existing applied ViewCriteria, but no luck. Do I have to rewrite also advancedSearch's ViewCriteria implementation and write an entire setWhereClause implementation to be able to "OR" every criterium? Or any other suggestions? Can I look at the entire Where clause and rewrite it (after applyCriteria and setWhereClause are called on the VO)?
Toine"
Sandra Muller (JHeadstart Team) told me today: "This sounds like a JDeveloper/ADF issue that is not related to JHeadstart. The question is: how can you add a where clause using "OR" if there are already one or more ViewCriteria applied?
To simplify the test case, you could create a simple ADF BC test client class in a test Model project without JHeadstart (in the test class, use bc4jclient + Ctrl-Enter), in which you first apply a few ViewCriteriaRows to a View Object and also add a where clause.
Can you please log a TAR at MetaLink ( http://metalink.oracle.com/ ), or ask this question at the JDeveloper forum at http://otn.oracle.com/discussionforums/jdev.html ? (This what I am doing now ;-))
Thanks,
Sandra Muller
JHeadstart Team
Oracle Consulting"
Anyone knowing the answer or am I asking for an enhancement?
Toine

Hi,
Can you SET your whereclause as follows ?
('Y' = <isAnd>
and EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> AND <another column in childtable> LIKE '<value supplied by user>))
OR ('N' = <isAnd>
AND EXISTS (SELECT 1 FROM <childtable> WHERE <column in childtable> = <column in EO's table> OR <another column in childtable> LIKE '<value supplied by user>))
)

How can you post comments during signal aquisition?

How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

Hey hkim,
If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame.
Hope This Helps,
Doug B
Applications Engineer
National Instruments

How do you add a ringtone without itunes?

I currently have an android phone that allows me to open an email or text message and make it a ringtone. However, I am trying to do this on the iphone but it will not let me? How do I add a ringtone without using itunes?

You don't...
tt2

How do you post imovie online without using youtube?

Similar Messages

Maybe you are looking for