How do you prevent a clip from moving to the front when clicking on it?

I really don't understand why, but for some reason whenever you click on a clip in Audition CS6's mutitrack editor, it automatically moves in front of all other clips on it's track. This is extremely annoying behavior if you're working on a track with more than two overlapping clips, and there doesn't seem to be any way to undo the move after it happens. Does anyone know of a way to disable this behavior? I've looked all over the place, but haven't been able to find one.

Fair enough, but I still say having a track be brought to the top by selecting it makes no sense. It creates the potential for you to screw up the arangement of a track without realizing it, and I think the fact that Audition doesn't even allow the action to be reversed by the undo button should be considered a bug. I've never used another audio editor that behaved this way, including earlier versions of Audition. Why not just have a send to front button in the right click menu for when you actually do want to send the track to the front? Also, as opposed to only having a single "send to back" button in the right click menu, there should really be submenu that says "send behind" and then has a list of tracks you can send the current track behind if you hover over it.

Similar Messages

How do you save a picture from email to the iPhoto?

How do you save a picture from email to the iPhoto?

Click and hold on the Save button, and a menu appears, listing each attached file’s name along with a Save As button. Select any individual file, and you’ll save just that attachment to disk. But the really nice feature is the final menu item—Add to iPhoto. That’s right; with one button click-and-hold, you can add all of a message’s attached images to iPhoto.
From Macworld.

On a MacBook, in Messages, how do you prevent your IMs from being sent as texts?

In Messages, how do you prevent your messages from being sent as texts?

Shootist007 wrote:
Not sure how and why this type of thing started but it seems every program you install these days likes to start part of itself when the system starts.
That started with Lion and progresses with the hillside feline. Ever since that pair got a personality disorder and can't make up their mind whether they're computers or phones, the world went to the dogs. "Always on" paradigm my azz!

TS2755 How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.

How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.

I apologize. I didn't see that you hadn't updated to iOS 7. That's an iOS 7 option. With iOS 6, you'd need to restore the device as new. Note that that will result in your phone being updated to iOS 7.
Best of luck.

How do you prevent Acrobat PDFMaker from rasterizing vector graphics?

I am using the "Create PDF" button (provided by the Acrobat PDFMaker in Acrobat X) to create a PDF from a Microsoft Word 2010 document.
This works fine, except that vector graphics in the Word document appear in the resulting PDF as raster graphics. (That is, when I zoom in, document text outside the graphics appears smooth, but the graphics are blocky; and text inside the graphics that should be retained as text - it's not converted to curves - is just pixels.)
The original artwork for the vector graphics is in CorelDRAW X6 (sorry, Adobe!).
I have exported the following files from the original vector drawing in CorelDRAW:
- EPS (with TIFF preview)
- Windows metafile (.wmf)
- Enhanced metafile (.emf)
I can insert any of these files into Word okay (Insert > Picture), but the resulting PDF always contains a rasterized (bitmapped) version of the vector graphic ("line art").
From memory, this didn't use to happen in my previous working environment (Acrobat 8 Pro with Word 2003, using artwork exported from CorelDRAW 12).
How do you prevent Acrobat X PDFMaker from rasterizing vector graphics? Or is Word 2010 (or CorelDRAW X6) somehow to "blame" here?

Transparency Flattening is being invoked.
From the Create PDF button, select Properties, what is your setting for Default Settings? Select High Quality Print

How do you move a clip from one event to a different event

Can't find anyway to do this. Seems pretty likely I'm overlooking the obvious.

Not sure what you mean. If you mean move clips from one event to another, you can just drag them in the Libraries pane. Or go to the File menu and use the Move Clip command.
If you mean from one project timeline to another, use copy and paste. Or just edit the edited source clip from the event in the browser to the other timeline.
Russ

How do you remove web clip from home page?

Hi,
Thanks as always.
I accidentally added a web clip of a web page to my home page, how do you remove it?
I thought I was making the page the default home page for safari, obviously not…
Thanks

Sorry about that - although your post is listed first, the time indicated when posted for each of our posts is identical.
If I could transfer the 10 points to you, I would.

How do you prevent your phone from locking during voice calls? Mute/unmute features? Are there any? Please help?

Here is the problem - I am often on conference calls. My company, for security reasons requires that I use the lock phone feature. However, I will be on a call, I have muted myself, then the phone locks. I then have to key in my password, and unmute my phone. This prevents me from "jumping in" the conversation appropriately. I either sound like I'm not paying attention or worse, I'm talking over someone else and seem rude. I have tried to search for any of the following features on the iphone 5 c.
Prevent phone from locking during phone calls
Set a button on the phone as mute/unmute
Find a headset that has a mute/unmute feature
I am not the only one at my company struggling with this so I'm thinking others might be too and that there is a solution!
Please help!
Thank you.

Sounds like you need to upgrade to the iPhone 5s
The 5s has Touch ID
You can unlock your phone with your finger instead of typing in a key code
No swiping to unlock either, just touch the home button
You can enrol multiple fingers as well
Here is a video of it in action
http://www.apple.com/iphone-5s/videos/#video-touch
Or wait and see what iPhone 6 has to offer
That being said, as desiel vdub posted if the phone is up to your face, the proximity sensor should turn the screen off
And when you lower the phone turn it back on again
Not sure about the phone locking when your on a call doesn't sound right

How do you prevent a VI from finding a sub-VI in it's old location?

We store our project on a file server P. I set the search path to
C:\local
P:\common
so the project VIs will find a local copy if I'm working on it or the global copy if I'm not. However, they always look to where the sub-VI was last found, regardless of the search path (it does NOT include or ). Is there any way of turning off this behavior?

Hi DoctorZ,
in a VI is
a) the relative path if on the same drive,
b) the absolut path if on another drive,
c) the name only if the subVI is in vi.lib, user.lib or instr.lib
to all subVIs stored. So if your search path does not include and the subVI will always be found. The search path is only used when to load a VI that has moved from its original path or is a top level VI.
I have no place found to turn off this behavior.
I find this behavior is good. So we need not to maintain a list of search paths for each project since not all projects have the same directory layout. A lot of us work on more than one project within two weeks and we use often a lot of subdirs.
Also we maintain the project in a project directory. Each dev
eloper makes a local copy of the project. All paths are now correct and the developer can do his work. If he finished he closes LV, copies the VIs back to the project directory and can now open the project again from the project directory. And all the paths are correct again.
It is neccessary to close LV, so it forgets all the paths which are collected from the time when it was started.
Waldemar
Waldemar
Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
Don't forget to give Kudos to good answers and/or questions

How do you prevent a user from using the playback bar to skip questions?

Hi,
I am fairly new to Captivate and I had a question regarding the quiz feature in Cap4. I have some users testing the module for me and they are able to skip questions. I have done the following: 1. Made the quiz required 2. removed the review buttons.
Is there something I am doing wrong?
Shal

Hello,
You could hide the playbar, since it is not really needed for Question slides: on entering the first question slide you assign the value 0 to the system variable cpCmndShowPlaybar, and when you want to show it again, assign the value 1.
Lilybiri

How do you stop a movie from playing past the end?

I uploaded a video to Vimeo I made from various clips and there was about 40 seconds of black after the end. How do you add a marker so it knows where to stop and hopefull return to the beginning. I already put the 'stop' marker in but it plays past it in the elements editor and assume that's what it did in the uploaded video. I believe 'stop' marker is only for DVD play. I have Elements 11.

dufusdad
Expand the Timeline with the -+ slider above the Timeline. Make sure that the slider is all the way to the right so that you are at maximum expansion. Then, as Hunt suggested, hit the End key and inspect the area where the Timeline Indicator stops. These possible fragments/leftovers present typically as very thin vertical black lines scattered in the tracks. After you delete any such fragments, repeat the process to make sure you have all the fragments.
The major reason for me adding to this thread was to remind you never to put a stop marker at the end of the last item on the Timeline. It is a bad practice to fall into. It is not needed and creates all sorts of problems especially as seen in burn to disc.
Please let us know the outcome.
Thanks.
ATR

Can you prevent Apple TV from connecting to the internet?

Is there a way to prevent Apple TV from updating and connecting to the internet? My internet is metered and slow, and I just use the AtV to mirror my itunes and stream content from my computer. I do not need the AtV connecting to the internet to load previews, pictures of newest tv shows or even genius recommendations.

The main problem is that for protected content in iTunes AppleTV sometimes needs to get a playback authorisation across the internet.
I've never quite figured what triggers this but it's often when content is new and hasn't been played on the computer before.
I took AppleTV, iPad and MacMini on holiday where I had no internet access and created a LAN without internet.
It was impossible to Airplay protected content from the iPad but 90% of the protected content in itunes on teh Mac Mini would stream and play - some new kids shows I purchased and had not played before would not stream.
Don't suppose you can connect the computer direct to AppleTV via ethernet and see if that lets you stream and play without internet connectivity?
Alternatively can you seletively turn off your router at times to avoid AppleTv connecting - that usually makes it only display Computers (iTunes streaming locally) and Settings as teh other icons are generated dynamically depending on availability tested via Apple's servers.
AC

How do you print a picture from Facebook on the iPad Air2

How do you print a picture on Facebook appearing on my iPad Air2 with my HP 8600 Office jet?

After enlarging the photo you might have to take a screen shot then print that from photos. When you hold you finger on the photo then tap save photo it's doesn't seem to be saving to photos.

How do I prevent my iPhone from moving my music to the cloud?

This is so frustrating! Every time I try to listen to my music on my iPhone it's all greed out with the cloud icon next to it. This is absolutely the worst music software I've ever used. The interface immediately vanishes replaced by a screen full of tiny 1/10th of a postage stamp sized pictures of my albums, thereby losing the album I was trying to download from a place I never told the software to put my music in the first place. At first I tried emailing support. Got no help at all. Then I tried canceling my subscription to the cloud thinking "ha! Try to steal my music now! Stupid cloud!" then of course I had no access to my music from my phone what so ever. Touché cloud! You win this round! So I BEGRUDGINGLY renew my subscription to this awful service that is holding my
music HOSTAGE! And of course all the music gets moved off to the cloud again. I want my music to STAY on
my phone!!! DUH!! How simple is that right?? Obviously it's too simple as when I am at work (no wi-fi) I can't listen to music on my phone. Unless, of course I want to use up all my monthy data allotment downloading music that by all logic should STILL BE ON MY PHONE. This is so ridiculous I can't believe I'm actually having to post in a discussion forum for a problem that SEEMS INTENTIONAL on apple's part. PLEASE tell me there is a simple solution or I'm done. I'll go get a galaxy or android as I have been fighting this problem for over a ******* year now.

This is what page 23 of the manula says:
Accept the suggestion: Type a space, punctuation mark, or return character.
Reject a suggestion: Tap the “x” next to the suggestion.
Each time you reject a suggestion for the same word, iPhone becomes more likely to accept
the word.
Read http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

After installing Snow Leopard, how do you prevent FH files from booting Fireworks?

Even if I choose "always open as" Freehand they still open in Fireworks when I double click the file. Any idea how to fix this? Thanks!

Do a Get Info (command I) on the file, and in the info window change the "Open with:" to FreeHand MX. That works on my iMac running 10.6.1, and it opens the file subsequently with FH. What doesn't work is the "Change All..." telling the finder to open all similar FH documents with FHMX. I guess we need to wait for a future OS update to fix that.

How do you prevent a clip from moving to the front when clicking on it?

Similar Messages

Maybe you are looking for