How do you print an email attachment and not the email itself. please.

how do you print an email attachment and not the email itself. please.
This question was solved.
View Solution.

Hi there, if there is text in the body of the email it will print automatically when sent to an ePrint email address. The only way to just have the attachment print is for there to be no text in the email body.
Hope that helps answer your question.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee.

Similar Messages

How do you move a single album, and not the whole library, in iPhoto to an external hard drive?

How do you move a single album, and not the whole library, in iPhoto to an external hard drive?

File -> Export to a folder and copy it over.
That will give you a folder with the images. There is no way to move an album outside of iPhoto. You would need to have a library containing it.
Regards
TD

Print only the attachment and not the email

Hi,
Is there a way for me to set the eprint in such a way that it only prints the attachments and not the email also?
This question was solved.
View Solution.

Hi,
I affraid the answer is no.
Any content will be printed automatically and it cannot be changed.
You cannot print email attachments without also printing the email.
You may find any limitations of the service listed within the Frequently asked questions (FAQs) section below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02641663&cc=us&dlc=en&lc=en&product=4083977&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How to assign a button for attachment and send the data through browser ?

Hi friends,
How to convert to browser ?
how to assign a button for attachment and send the data through browser ?
Thanking you.
Regards
Subash.

Refer to
How to create a text box in ascreen painter?
where another user (venkateshwar reddy) has asked a very similar question...
Jonathan

How do you make it print first page first and not the last page first?

I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?

Hi,
From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do you print a picture from Facebook on the iPad Air2

How do you print a picture on Facebook appearing on my iPad Air2 with my HP 8600 Office jet?

After enlarging the photo you might have to take a screen shot then print that from photos. When you hold you finger on the photo then tap save photo it's doesn't seem to be saving to photos.

How do you store "sent" mail locally and on the server?

Hello. This is a slightly lengthy...but hopefully someone can help!
I am using the Mail program in Tiger (Mac OS X 10.4.3) with an IMAP account. I am wondering how you set up the preferences so that the e-mails that you send (outgoing) are stored locally on my computer and also on the server (so that I can .
So far I have tried checking and unchecking the option to 'store mail on the server' (in the 'Mailbox Behavior' window of the Preference Box). When I uncheck the box, the sent mail is stored ONLY locally on my computer.
When I check the box so that the mail is stored on the server, I cannot view any copies of the sent mail on my computer, nor can I view the sent mail through my other school account (same account b/c it's IMAP).
My IMAP account is setup with my school, so I have a folder called 'Sent' that I have programmed so that copies of my sent mail are stored there (viewable locally on any computer that I log-in to). I formerly user Thunderbird (with Mozilla) and it allowed me to save sent mail into that same folder, but I am unable to do so with Mail in the Tiger program.
I hope this is understandable...anyone able to shed some light on this issue? Thanks!
PowerBook G4 Mac OS X (10.4.3)

Hi tanjo,
This is a bit of a workaround, but you could set
mail.app to automatically blind copy to yourself any
messages you originate (and then use a rule to
automatically file these messages in a "sent" folder
of your choice).
A method to do setup this default bcc is on
MacOSXhints.com, in this article: Permanently add Reply To headers in
Mail.app. It references this command line:
defaults write com.apple.mail
UserHeaders '{"Bcc" = "[email protected]";
best of luck,
...ben
PB G4 15 1.67 GHz,
iBook SE 0.47 GHz Mac OS X (10.4.3)
Hi Ben,
Thank you very much for the tip. I'm going to give that a try. Happy Holidays!
--tanjo

How to get siri to send a text to an email address and not the iphone number?

Better worded this time. Siri sends texts using a contact iphone number if they have one. I want it to send to the contacts email address (or apple id). if no iphone is present for a contact siri asks me which address i want to use. if there is an iphone listed for the contact it defaults to that phone number. I don't want it to do that. I want siri to always use the email address. Can that be done?

If you wrote your database send mail package to support different MIME Types, then you need to change the MIME Type to HTML before you add the HTML tags to your email message body. Check out this article (Sending Email from the database with UTL_SMTP package) and look at the "maildemo.sql" package provided in the article. This package will show you how to set the MIME Type to support HTML message bodies.
Hope this helps,
Craig B-)
If a response is helpful or correct, please mark it accordingly.

If you have 2 apple ids, how do you sign out of one and into the other so you can update the app that was purchased in the other account. thanks

If you purchased an app in one account and work mostly in another, how do you switch the purchased app account to update it?
thanks

You need to sign out and back in only if you're on your Mac and you want to update the iTunes data. You'll see a notice saying that there are five (or so) updates but when you go to download them, they're not all present. So you download them, sign out from one ID and sign back in with the other ID. Then you can download the remaining ones.
If you're downloading directly to the iPad, everything is transparent. It does not matter what ID is configured in Settings. The iPad automatically chooses the correct ID or IDs when updates are available.

How do you monitor a background thread and update the GUI

Hello,
I have a thread which makes its output available on PipedInputStreams. I should like to have other threads monitor the input streams and update a JTextArea embedded in a JScrollPane using the append() method.
According to the Swing tutorial, the JTextArea must be updated on the Event Dispatch Thread. When I use SwingUtilities.invokeLater () to run my monitor threads, the component is not redrawn until the thread exits, so you don't see the progression. If I add a paint () method, the output is choppy and the scrollbar doesn't appear until the thread exits.
Ironically, if I create and start new threads instead of using invokeLater(), I get the desired result.
What is the correct architecture to accomplish my goal without violating Swing rules?
Thanks,
Brad
Code follows:
import java.lang.*;
import java.io.*;
import javax.swing.*;
import javax.swing.text.*;
import java.awt.*;
import java.awt.event.*;
public class SystemCommand implements Runnable
     private String[] command;
     private PipedOutputStream pipeout;
     private PipedOutputStream pipeerr;
     public SystemCommand ( String[] cmd )
          command = cmd;
          pipeout = null;
          pipeerr = null;
     public void run ()
          exec ();
     public void exec ()
          // --- Local class to redirect the process input stream to a piped output stream
          class OutputMonitor implements Runnable
               InputStream is;
               PipedOutputStream pout;
               public OutputMonitor ( InputStream i, PipedOutputStream p )
                    is = i;
                    pout = p;
               public void run ()
                    try
                         int inputChar;
                         for ( ;; )
                              inputChar = is.read();
                              if ( inputChar == -1 ) { break; }
                              if ( pout == null )
                                   System.out.write ( inputChar );
                              else
                                   pout.write ( inputChar );
                         if ( pout != null )
                              pout.flush ();
                              pout.close ();
                         else
                              System.out.flush();
                    catch ( Exception e ) { e.printStackTrace (); }
          try
               Runtime r = Runtime.getRuntime ();
               Process p = r.exec ( command );
               OutputMonitor out = new OutputMonitor ( p.getInputStream (), pipeout );
               OutputMonitor err = new OutputMonitor ( p.getErrorStream (), pipeerr );
               Thread t1 = new Thread ( out );
               Thread t2 = new Thread ( err );
               t1.start ();
               t2.start ();
               //p.waitFor ();
          catch ( Exception e ) { e.printStackTrace (); }
     public PipedInputStream getInputStream () throws IOException
          pipeout = new PipedOutputStream ();
          return new PipedInputStream ( pipeout );
     public PipedInputStream getErrorStream () throws IOException
          pipeerr = new PipedOutputStream ();
          return new PipedInputStream ( pipeerr );
     public void execInThread ()
          Thread t = new Thread ( this );
          t.start ();
     public static JPanel getContentPane ( JTextArea ta )
          JPanel p = new JPanel ( new BorderLayout () );
          JPanel bottom = new JPanel ( new FlowLayout () );
          JButton button = new JButton ( "Exit" );
          button.addActionListener ( new ActionListener ( )
                                   public void actionPerformed ( ActionEvent e )
                                        System.exit ( 0 );
          bottom.add ( button );
          p.add ( new JScrollPane ( ta ), BorderLayout.CENTER );
          p.add ( bottom, BorderLayout.SOUTH );
          p.setPreferredSize ( new Dimension ( 640,480 ) );
          return p;
     public static void main ( String[] argv )
          // --- Local class to run on the event dispatch thread to update the Swing GUI
          class GuiUpdate implements Runnable
               private PipedInputStream pin;
               private PipedInputStream perr;
               private JTextArea outputArea;
               GuiUpdate ( JTextArea textArea, PipedInputStream in )
                    pin = in;
                    outputArea = textArea;
               public void run ()
                    try
                         // --- Reads whole file before displaying...takes too long
                         //outputArea.read ( new InputStreamReader ( pin ), null );
                         BufferedReader r = new BufferedReader ( new InputStreamReader ( pin ) );
                         String line;
                         for ( ;; )
                              line = r.readLine ();
                              if ( line == null ) { break; }
                              outputArea.append ( line + "\n" );
                              // outputArea.paint ( outputArea.getGraphics());
                    catch ( Exception e ) { e.printStackTrace (); }
          // --- Create and realize the GUI
          JFrame f = new JFrame ( "Output Capture" );
          f.setDefaultCloseOperation ( JFrame.EXIT_ON_CLOSE );
          JTextArea textOutput = new JTextArea ();
          f.getContentPane().add ( getContentPane ( textOutput ) );
          f.pack();
          f.show ();
          // --- Start the command and capture the output in the scrollable text area
          try
               // --- Create the command and setup the pipes
               SystemCommand s = new SystemCommand ( argv );
               PipedInputStream stdout_pipe = s.getInputStream ();
               PipedInputStream stderr_pipe = s.getErrorStream ();
               // --- Launch
               s.execInThread ( );
               //s.exec ();
               // --- Watch the results
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stdout_pipe ) );
               SwingUtilities.invokeLater ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //Thread t1 = new Thread ( new GuiUpdate ( textOutput, stdout_pipe ) );
               //Thread t2 = new Thread ( new GuiUpdate ( textOutput, stderr_pipe ) );
               //t1.start ();
               //t2.start ();
          catch ( Exception e ) { e.printStackTrace (); }


Thanks for pointing out the SwingWorker class. I didn't use it directly, but the documentation gave me some ideas that helped.
Instead of using invokeLater on the long-running pipe-reader object, I run it on a normal thread and let it consume the output from the background thread that is running the system command. Inside the reader thread I create a tiny Runnable object for each line that is read from the pipe, and queue that object with invokeLater (), then yield() the reader thread.
Seems like a lot of runnable objects, but it works ok.

TS3899 When sending an email using my iphone it always goes to an old email address and not the address set up in settings

I have removed an email address from my Iphone and have added a new one. My new one has been set up in the settings as the default account. When trying to send an email the phone always asks for a password for the old email address and will not use the new address. How do I get rid of the old address and use the new one? I have used the delete account to remove the old email address.

Try chnaging the Default Account in Settings > Mail, Contacts, Calendars.
You can also try to Reset All Settings from Settings > General > Reset.
If neither of those work, try restoring the iPhone.

How can you delete part of a message not the whole conversation?

How do you delete part of a message from a conversation on the new upgrade? You used to be able to click on the text, ticking it and then hit trash but thats gone. Please help!!

click and hold on the bubble, you will now see "copy/more" select 'more'
you can now choose which bubbles to delete by selecting a check mark next to them and then hit trash can

Can Autoresponder reply to "Reply to" email address and not "From" email address?

I have a contact form on my Wordpress website and I want to set an autoresponder through Rules to reply whenever someone reaches out through that form. The issue is, the email I receive whenever someone fills out the contact form is technically from wordpress, so even though it has a "Reply To:" line with the submitter's email address, the autoresponder is only sending the reply to the "From" address (wordpress).
Is there any way to set an autoresponder to see the "Reply to" address and send the response there?
I can't do this through the cPanel at my server because they only allow generic autoresponders that reply to every email, and I need this one to only go to email with a specific subject line.
I'm using Mail version 6.6 with Mountain Lion

cfm007,
Welcome to our family. We want you to be able to enjoy all the services we provide and we definitely need to address this. Do you receive/make calls without problems? Are you able to receive messages with your contacts' number? Are you using iMessages? If so, go to Settings>Messages>Send&Receive>only your phone number should be enabled.
AdaS_VZW
Follow us on Twitter at @VZWSupport

Often when I click on a link to open an email to go to in an article, it opens a blank FF window and not the email format it should.

Since upgrading to FF 4.0 when I click on an email link it never opens to that link but to a blank FF window.
Would FF 5.0 fix that or what do I do?
I'm afraid to use 5.0 because 4.0 caused a multitude of problems for me, not all fixable.
Please send reply to [email protected] Somehow I never can get back to it on the Support Forum.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

How do I search under a folder (and not the whole computer)

I want to search for files under a specific folder
How do I do this?
When I search, the whole computer is searched
Thanks
Omar

One thing that'll work is (in 10.7.5, at least)
1) open the folder you want to search, using the Finder
2) Type your search text into the Finder's Search box
3) In the Search bar at the top of the results, select the name of the folder.
Good luck
srb

How do you print an email attachment and not the email itself. please.

Similar Messages

Maybe you are looking for