How Do You Print What OS X Renders and What You See Like the Lines on a Table on OpenOffice?

Hi. How do you print what you OS X's graphics is rendering (what you see is what you get). I'm trying to print a calling card on OpenOffice Apache, latest but it would not print the guidelines (the lines when you use table, columns and rows) and it would only print the letters.
Thank you in advance.
God bless.

If the lines are printing but they are too faint to see them easily, then there could be a rendering setting that could improve the line density.
But if the lines are not at all visible then maybe the application is set not to print them. So check the Preferences or the printing options for OpenOffice? There might be a setting about the printing of gridlines.
FYI - MS Excel has the gridlines disabled for printing but they can be enabled via the Excel print dialog.

Similar Messages

  • How do I print what I see? The image on my screen is cropped on the paper.

    I want to print what I see on the screen. When I attempt to do so, the image is cropped, but this crop does not appear on the mac screen.

    You must crop your photo to the size ratio of the paper you'll be printing on.  Therefore, if you want to print a 4 x 6 you need to crop the photo to 4 x 6 first.  Then select the paper size and print size in the print window.
    OT

  • This is about iPhoto:  I need to print the FULL IMAGE as shown on the screen:  the image is SQUARE (equal on four sides).  iPhoto keeps cropping it into a rectangle - THIS IS NOT ACCEPTABLE!  How do I get what I see on the screen in print form???

    I need to print the FULL image as shown on the screen - the image is SQUARE (equal on all four sides).  iPhoto keeps cropping it into a rectangle - this is not acceptable!  How do I get what I see on the screen into print form?

    Like Terence explained:
    OT

  • How can you tell if the line has errors?

    I'll try and keep this as brief as possible.
    <background>
    For 2years (up to 6months ago) I was on BE ADSL and was very impressed with the quality of the service (low latency, decent bandwidth) on my line.  However when I heard that FTTC was being rolled out I switched to Zen internet on the understanding that I could then switch to the FTTC product as soon as it was available.
    Immediately after switching to Zen I started to experience problems with VOIP (I use VOIP extensions against an externally hosted PBX) and was seeing CRC errors on the line.  In the process (~2months) of getting this diagnosed the FTTC product became available and since I wanted uncapped switched to BT Infinity for Business Option 2.
    </background>
    I now find that again I get sporadic VOIP problems (but not as bad as on the ADSL2 service via Zen) but very regular BBC iPlayer dropouts listening to the radio.
    Due to the previous problems whilst on ADSL2 I suspect I still have a minor line fault but as I can't access any stats on the line have no way to verify.  Does anyone have any pointers on where to get line stats to see what is going on on the connection? I can't get any info out of the OR modem.
    Regarding my network.  I am using a cabled, gigabit connection directly to a Draytek 2820n which is in turn doing the PPPoE through the BT OR modem.  I use two different machines and experience the same issues on both.  I'm a server & network admin by trade so pretty sure it's not my internal infrastructure at fault.
    My IP profile is apparently 38717 Kbps down / 10000 KBps up.
    BT Speed tester shows achieved 26581 down and 4912 up though

    jmansford,
    I may be wrong about this as I am only refering to my own 2750n settings,but looking at your upload throughput test results some if not all of your problems could be due to a wrongly wieghted QoS setting and/or port capacity setting based on QoS.
    As you line profile is ok at 38717 Kbps down / 10000 KBps up it looks like there is no problem on your actual line,but phone line noise test might find some crackle,but I don`t think so.
    By your post,you say your are routing PPPoE through the Draytek into the OR modem.?
    If so,maybe you could try leaving the OR or Draytek out of the chain as a process of testing where faults [if any] are.?
     To sum up a bit imo leaving the OR modem out of the net chain might be a better way as I only use the 2750n on it`s own as the OR modem is not then needed.
    Opps! sorry I might be wrong in my above thinking,but is your Draytek just a router or a modem/router combined like the 2750n.?
    But either way the QoS setting are still important.

  • How can you see all the open tabs?

    When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

    Hi,
    You can try to set '''browser.allTabs.previews''' to true in [http://kb.mozillazine.org/About:config about:config]. (In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear. Click '''I'll be careful, I promise!''', to continue to the about:config page.)
    [http://kb.mozillazine.org/About:config_entries about:config Entries]

  • Headings and other print run into each other and I cnnot see all the print in some boxes on vrious web sites. I have removed and re-installed more than once.

    copy on the web pages overlap.....headlines appear over other print.....link tabs are on top of each other. I have removed and re-installed Firefox many times. This does not happen with other browsers. Also, some web sites show sections that are off center.

    Hi,
    Please see [https://support.mozilla.org/en-US/kb/Firefox%20prints%20pages%20in%20a%20different%20layout this]. If the site has a Print button/icon you can try to use that. On some sites you can also try to right-click the content > '''This Frame''' > '''Print frame'''.
    [http://kb.mozillazine.org/Problems_printing_web_pages Problems printing web pages]
    [https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Firefox prints incorrectly]

  • How do i print what is on the screen

    how do i print what is diaplayed on the screen

    there  are a number of ways to do that.
    Windows Vista, 7 and 8 have the Snipping tool for that purpose.
    Using the snipping tool
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • How do you manually lower the resolution on a hp photosmart 209a-m printer

    I want to print with black ink only and lower the resolution.  How can you manually lower the resolution settings?  Black ink only is no issue but I cannot lower the resolution to below the 600 that it's set for.  Wasting ink!  Planning on getting a non- hp printer due to ink costs.

    Hi,
    From applications, using DRAFT printing or FAST printing will definitely reduce the resolution.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you see what bitrate your music is on the latest iTunes?

    How do you see what bitrate your music is on the latest iTunes?

    select
    Music
    Above the first song there are colums you can customize  ,  select bitrate from that menu
    tap two fingers on the trackpad will open up the menu to customize after moving the pointer to that field

  • How do you see what version of PDK you are using?

    how do you see what version of PDK you are using?
    I'd like to know where I can look to see the full version number and understand what version I am on.

    The Release Notes document (pdk.release.notes.html) contains the version information.
    Tugdual Grall has a great blog on additional ways of specifying your PDK/OC4J versions.
    Peter

  • HT1420 How do you see what computers are authorized for your account?

    How do you see what computers are authorized for your itunes account?

    There's no list available from your end; you need to go to each you think might be and check.
    (74236)

  • How can you see what the WLC ACL is denying?

    How can you see what the acl on our WLC5508 is denying? The counter keeps on going up but what is getting blocked is nowhere to be seen.

    You are right but you can monitor that through the hits counts on the (WLC)Security->Access crontrol list === Hits
    It will give you some idea for trouble shooting also you have the cmd line for details analysis.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • When importing text into a slide and it overflows how do you see what is not on the screen

    When using keynote and importing text that overflows the slide how do you see the text not on the slide so that you can cut and paste to next slide

    Reduce the canvas to a smaller size:

  • How can you see what the actual fonts look like in menu?

    In WORD - when you go to the menu bar to see the fonts, you'll see maybe a hundred of them - but you see them the list in the "actual" font style of each font! So in a few seconds you can actually "see" a hundred font types - makes it easy to quickly select which one you like.
    I can't seem to do this in FCPro 5.04. I must click each font from the menu bar - type a word and THEN I see what it looks like. VERY TIME CONSUMING if you don't know your fonts!
    Isn't there a way in FCPro se see all the fonts in a list in the actual "style" of each font - like WORD does? There's a haxie called "Fontcard" that does exactly this - but not in FCPro!
    Can anybody do this - or I'm dreaming here - just keep checking them out 1 font at a time!!
    Thanks,
    Larry

    Larry,
    If you're not in too big a hurry when using Title 3D, you can scroll through the font list. As you go from one font to another, the characters you have highlighted will show in that font. Other than that, I use FontBook to preview fonts quickly.
    -DH

Maybe you are looking for

  • How do you get multiple live instruments to put out sound?

    I just got a M-Audio 61 keyboard from my wife for our anniversary. I love it and it works great with GarageBand 1.X. I also have a guitar I use with GB. It is plugged in the 1/8 in. mini jack input in the back of the Mac. I however can't get both to

  • How do I add the app store to my ipod touch

    I have an iPod Touch and seemed to have lost the app store (And access to it).  How do I restore the App store to my iPod touch?

  • Spark Video Player pause / resume loading

    I am developing an application that loads many images and sounds in the background. When a page containing still unloaded content is requested, the current background load is canceled in order to free all of the user's available bandwidth to load the

  • Focus issue: why Tab and cursor are not in sync?

    Hi, All: I have a MyTextArea which is a subclass of JTextArea. In processComponentKeyEvent, transferFocus() is called on Tab key. The panel has some MyTextArea's and other GUI components. Here is the problem that is bothering me now: The cursor does

  • Album Artwork(NEED HELP!!!)

    The album artwork is not matching with the artist. Like lets say i wanna listen to Blink 182 but the album cover is 50 cent. It really bothers me any body knows how to fix it? And some of the artwork is just black. There's no album cover at all just