How do you publish comments in XI?

Reviewers are upgrading to XI. No one can figure out how to Publish Comments. This is crppling our workflow! How do you publish comments in XI?

Review these Acrobat Help topics:
http://helpx.adobe.com/acrobat/using/commenting-pdfs.html 
http://helpx.adobe.com/acrobat/using/comments.html#managing_comments 
As y'all are going to be working out of the contemporary Acrobat it'd be more than a little beneficial to add the link that follows to the browser's Favorites/Bookmarks. 
https://helpx.adobe.com/acrobat.html 
Be well...

Similar Messages

  • How can you post comments during signal aquisition?

    How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
    I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

    Hey hkim,
    If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame. 
    Hope This Helps,
    Doug B
    Applications Engineer
    National Instruments

  • How do you print comments in pages under mavericks?

    How do you print comments in pages under mavericks? Earlier if show comments was checked, all the comments were visible and could be easily printed. Now only those comments are visible on which the cursor is pointed but even those do not get printed! 

    Thanks to all for to the 'older Pages' suggestion. I don't have the last Pages on my mac anymore (although this is probably just me being really, really dumb), but the suggestion inspired me to try another very similar work around - which was also successful. Just in case anyone's in the same situation as me, am sharing it here!
    For absurd reasons I won't bother to explain, I've also got a version of Word for Mac. I prefer writing on Pages, though, so all my documents (and their comments...) are Pages files. In the really unlikely event that you've also ended up with both Pages and Word (I know...) just export to a .docx file, open it with Word, and print from there. It retains all comments, track chages, etc. This seems really obvious, but I hadn't thought of it...
    This can also be a work around for the lack of 'Compare Documents' and/or 'Merge Documents'.
    Of course this would all be much better if it were actually just in Pages...I hope this helps, and thanks!

  • How to you "publish" Bonjour Shared printers using Workgroup Manager?

    Dear Friends,
    Hello. We have just spend considerable time setting up Mac OS X 10.6.4 server to host some printers to our Mac clients (previously we had used a Windows print server but it was too slow and inflexible). We have the printers we need set-up and shared out as Bonjour Shared printers because that sends out all of the duplex setting we need. I have tried to "publish" these using Workgroup Manager and they do not show up on the list. How do you "publish" these printers using WGM? NOT: We can't just let people select "nearby" printers because we want to set a default and use kerberos security.

    Eric T Gadsby wrote:
    Anthony,
    Thank you for you help. The procedure you outline is what we have attempted to do. We add the Bonjour-shared printers to a client and then open Work Group Manager on the same computer but when you go to the "Printing" pane of "Preferences" the printers do not show under "Available Printers", neither do USB printers.
    Hope this clarifies our problem. We would like to use Work Group Manager as advertised but it doesn't seem to be working for us.
    Welcome to my world…
    This 'bug' has existed for several major versions of Mac OS X Server (10.6, 10.5, and maybe 10.4). I did report it more than once to Apple as an official bug but they don't seem to 'get it' despite my best efforts.
    You can do the following
    Add a printer directly to a computer running WGM,
    Then use WGM to 'push' the printer out to clients,
    The model of the printer will then also be pushed out to clients so they automatically select the correct driver but not the correct paper tray/duplex/etc. settings.
    You can do the following
    Add a Mac OS X Printer Server queue to the computer running WGM (which must not be the same computer acting as the Mac OS X Printer Server) if you do this via the Bonjour advertisement of the queue then it will not get the model, or any settings from the print server.
    You can then push this queue out to clients via WGM
    You cannot do the following
    Add a Mac OS X Printer Server queue to the computer running WGM (which must not be the same computer acting as the Mac OS X Printer Server) if you do this via IPP, then the WGM machine will get the model automatically, but not any paper tray/duplex settings.
    However this queue cannot then be seen in WGM and therefore cannot be pushed out to clients.
    Apparently doing custom XML, would allow also pushing out printer settings, but this is so far from 'the Macintosh Way' that only a masochist would do it.
    This area is one of the few where the Mac is significantly worse than Windows, it is an area that Microsoft (mostly) sorted literally decades ago. Not only in the Windows world can you push the printer model, and the printer settings, but you can even if needed push the entire printer driver out to the (Windows) clients.

  • How do you publish a website without mobile me working anymore?

    How do you publish a website using iweb 09 with a moved mobile me account , when using icloud.  I can't use mobile me.

    Here's what you need to do:
    1 - purchase a domain name (you'll need one in order to publish your website to a commercial hosting service.
    2 - obtain a hosting service to publish your site to.
    3 - obtain the ftp address, username and password from Customer Support of your new hosting service.
    4 - set iWeb to publish to an ftp server and enter the necessary information you received from Customer Support.
    An alternative to #4 would be to publish your website to a folder on your hard drive and use a 3rd party ftp client like Cyberduck (free) or Transmit to upload the website file to the server.
    OT

  • How do you publish a webpage made in Muse to a third party server as I cant seem to do it

    Hi How do you Publish a webpage ( gallery) to a third party server
    tutorials are vague when they get to this part of publishing.
    I use Dreamweaver as a rule but would love to migrate over to Muse
    if I can master this part
    thanks

    http://www.adobekb.com/launching_pt02.html#publishingsiteto3party

  • How do you publish as an MP4 in a H.264 format using Captivate 6?

    How do you publish as an MP4 in a H.264 format using Captivate 6?

    As a temporary workaround, this is my work flow:
    I create a 'crosshair' in the exact location, using two line shapes that can be positioned exactly using the Transform accordion.
    The motion path end points have a circle that you'll have to drag over the crosshair. Motion paths use the center point of an object, contrary to resizing, moving that is from the upper left corner of the bounding box. I used the described work flow in the first movie here: http://blog.lilybiri.com/reset-effects
    Lilybiri

  • How do you leave comments on you tube using iPod touch 4th gen?

    How do you leave comments on you tube using iPod touch 4th gen?

    Use the YouTube app and then
    Rate or comment on a video:
    On the More Info screen, tap “Rate, Comment, or Flag,” then choose “Rate
    or Comment.”
    Above from Users Guide
    iPod touch User Guide (For iOS 5.0 Software)

  • How do you publish Exchange 2010 Management Console on a Citrix Server?

    I need to be able to remotely manage exchange throught the management console and want to publish it through Citrix.  I successfully installed the console on the XenApp servers in our farm, but after publishing it, can not get the published console
    to run through the Citrix Plug in or oweb interface.  Any idea what I could be doing wrong?  Since I can run it directory from the server, the problem must exist in the way I published it.  I have checked permissions and those appear to be ok.
    Thanks for the assistance.

    hi,
    How do you publish your EMC? Since you can't run, do you get some error information. But it seems it isn't a exchange problem. If you have installed your EMC on your another computer in you ORG. You can run it by click start. If you want to use Citrix, ask
    them for help is a good idea.
    hope can help you
    thanks,
    CastinLu
    TechNet Community Support

  • HT1107 Since Mobile Me is moving to iCloud, how do you publish a domain in iweb with iCloud?

    Hello,
    I am trying to set up iWeb to publish to my own domain, and see info about doing that with Mobile Me, but since Mobile Me is moving to iCloud, how do you set it up with iCloud?  I just want to be able to publish my website directly to my own domain with iWeb.  Thanks!

    As you now know iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
    All of these features can be replaced with 3rd party options.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    NOTE: the iLife 11 boxed version Is no longer available at the online Apple Store.  To get a copy you'll have to try Amazon.com or eBay.com.
    This may be of interest to you: Life After MobileMe.
    OT

  • How do you publish multiple groups to one calendar ?

    I have half a dozen groups to sort my contacts by in Address Book, ie Customers, Prospects, Suppliers, Family etc. Now I want to publish my iCal calendar so my call answering service can see where I am in the week.
    How do I publish to one calendar so they can see all my appointments as it would seem you have to select one group to publish to one calendar and then publish a second calendar for another group and so on. This will get tedious as they would then have to refer to 3 or 4 different calendars, one for Customers, one for Prospects etc to see where I am all week.
    Any help much appreciated.

    you can create calendar groups and then publish them on the web - go to file > publish new group and then drag the calendars you want into that group.
    Power Mac G5 2.7 GHz   Mac OS X (10.4.8)  

  • How do you print comments on one page

    I can't figure out how to get comments to print continuosly rather than one comment per page. I have a 30 page PDF with comments on each page. I don't want to print out 30 pages. I just want them to print on x pages as if it were a word doc. Most comments are short. Printing one minor edit per page is driving me nuts.

    Here's a link to a forum discussionthat includes a script: http://acrobatusers.com/content/how-do-i-print-comments-summary-all-one-page-0

  • How do i publish comments in a shared review?

    It used to automatically give me the option with a publish button, but now I don't see it anywhere.

    Don;t believe you can directly print the comments and you are right there are not in the EXIF oir IPTC data as they apply only to the images in the cloud.
    You can copy the comment, right click  on a comment and an option to copy it is presented. So if you copy the comment, import the image into your library then paste the comment into one of the IPTC fields, whichever you find most convenient the comment will be part of the image.
    A bit convoluted but I don;t see any other way to do it. The stream and the comments added to images in it are not really meant to be used like this.
    regards

  • How do you publish a second issue in a multi folio DPS app?

    For a free folio is it really as easy as the following?
    1.) Go to DigitalPublishing.acrobat.com and click on folio Producer
    2.) Click on the Folio and click the Publish Button
    3.) Select the options as "Public" & "Free"
    4.) Enter The Product ID and Hit Publish
    Do you sign in with the new PRODUCT ID that you've created for the second issue?
    How far in advance can you schedule the publishing of an app?
    Is there no waiting period after submitting the app to APPLE?

    Yes, it's that simple for free apps. Just publish it as public and free—and use a DIFFERENT product ID such as com.company.app.issue—and it will be available.

  • How can you add comments to a text file while using a Digital Waveform vi?

    Hi. I'm very new to Labview. I have a txt file of 1's and 0's wired to a "read from text file" which is then wired to a "spreadsheet string to digital.vi" ("digital waveform") and lastly to a graph. I want to add notes to the txt file that will not be read in the digital waveform. i.e. Like how you use // or /* in a C++ program to show that you are writing a comment and not code.
    Labview version: 8.5
    Thank you

    You will just need in your text file a line at a time.  Search the string for the characters // or /*.  If it finds them, then loop back and read another line.  If it doesn't find them, you must have a good line of data and you can pass on to the next part of your cod.

Maybe you are looking for

  • Business Address Services (BAS) and Where-Used ADRV/ADRVP

    Can someone point out any good sources of information on Business Address Services or possibly its predecessors either online or hard-print?  I've been through the help.sap.com information for BAS and all sorts of SAPNotes without finding what I'm lo

  • Flash Player, W8 & a site

    Hi evreyone, hi everybody, First I apologies for my english, I hope you will understand me A genealogy site use flash player to display birth acts and others. This display works on my old computer working with XP This display works on the PC of my br

  • How do I drag and drop an action onto a task flow?

    In How to pass View Object bind variable from ADF page John states that You should also consider dragging-and-dropping the executeWithParams operation on your task flow and wiring it to occur before your page instead of putting it in the page definit

  • How do I get Blackberry Protect to locate my device?

    I have Blackberry Protect downloaded on my device but when I go to the website on my PC,it won't function.It worked with my 8630,should I exchange devices somehow?

  • Lenovo G400s Wireless Connection Limited Access on Windows 7 Ultimate - 32 bit

    Just bought Lenovo G400s, install windows 7 ultimate - 32 bit on it.  It turns out the wireless network driver need to install manually, the disc driver that came with laptop was for windows 8.1. So I went to lenovo website, put on the series and dow