How do you put a video clip in the corner of a picture

I have already replaced the video with the picture and detached the audio. I am trying to put the video clip in the corner of the picture.

Yeah... I have some question for the iMovie version for MacBook Pro and the iMac on the iMovie for OS X forum. I found some of my answers here:
https://discussions.apple.com/community/ilife/imovie?view=discussions
This forum here I use when I have questions for iMovie for iOS, the version of iMovie that runs on iPad/iPhone.

Similar Messages

How do you add a video clip to a slide show?

How do you add a video clip to a slide show using elements 12?

You can import some very short video clips into Photoshop and make gifs. I can import short (10 second or so) .mvi video clips I've taken with my point and shoot camera.
Use File ->Import->Video Frames to Layers
CS3 doesn't recognize .mvi files until you enter *.* in the box, hit load, then find the file you want.
After the file has been loaded, go to Windows, and check Animation.
After the Animation bar loads, go to the right side arrow, check Make Frames from Layers.
Then Save for Web and Devices, and you've got your gif.
I find it much easier to use the separate software.

How do you speed up video clips for Imovie 8?

How do you speed up video clips for Imovie 8?

Do you mean get 55 minutes of real time footage to show in only 55 seconds?
One way that might work but it will take a fair bit of work in multiple repeated steps.
Select all the footage on the timeline and then use the Turtle/Rabbit slider to speed it all up to the maximum speed allowed. This of course won't be any where close to 55 seconds.
BUT... export your movie back out to video tape or to a full quality DV format quicktime file. This speeded up version becomes "normal" time. Now reimport to iMovies. Since this is now normal speed as far as iMovie is concerned, you can again use the slider to speed the whole thing up to the max.
Now just repeat as often as needed to get it as fast as you want. Export back out, reimport, adjust speed, export, import, adjust, etc.
Patrick

, how do you put a video from the phone onto imovie

how do you put a video from the iphone onto imovie

Import it to your mac (http://support.apple.com/kb/HT4083) then import it to iMovie.

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

How do I insert a video clip into the timeline?

Do you happen to know how I could insert a video clip into the middle of a movie like you do in FCP? Can you add tracks and insert the clip above the spot i need to change for each movie.
I don't want to render the whole movie (convert it into a MPeg2) each time.

No - DVD timelines are a little different to FCP. If you need to add a clip to the stream, you need to split the exisitng clip (you could trim it back to where you want to insert the new piece) and drag the new piece onto the same timeline. If you trimmed the existing piece then add another instance of it to the timeline and trim the new part from the left until you get to what you want as the out point.
If you have a collection of video clips on your DVDSP timeline, simply dragging a new one on will shuffle the others along appropriately. However, the audio will not shuffle with them, and you'll end up moving it all manually.
The very best thing is to create the timeline precisely as you want it in FCP and encode it to MPEG2 before bringing it in to DVDSP. Remember that DVDSP is not an editor, it is a place to assemble your work - it won't do anything remotely like FCP in that respect.

Pages for ipad2 - how do you get text to wrap around the contours of a picture? Not the simple square wrap, but I saw text following the contours of a bike wheel at the Apple store demo

Pages for ipad2 - how do you get text to wrap around the contours of a picture? Not the simple square wrap, but I saw text following the contours of a picture of a bike wheel at the Apple store demo

Sjazbec,
Thanks for the reply.
I did read the help and went through the tutorial - the butterfly text wrap (and the wrap around the curved contour of the bicycle wheel at the Apple store) is the reason I am asking this question. I don't know how to use one of my own pictures and tell Pages what contour to wrap around. Is there some additional image editing software that I need to "creatively crop" one of my own pictures, so that Pages will be able to wrap around that contour?
Thanks / Danke!!

How do you add additional video clips to a multicamera sequence after aligning multiple cameras?

We shoot extended videos (1-2 hours in length) all the training videos I've seen for CC walk you though aligning the inital cuts and then editing, but they don't say how to add the rest of the clips from that session to each video track. Any tips?

Thanks Mark - That worked. By the way, in case there are any other rookies out there trying to create a multicam sequence like this, make sure that you 1) create the MultiCam Source Sequence and then 2) right click on the Multicam sequence icon in the project window and then 3) choose open in timeline.
Once the project is open, verify that the camera views are sync'd and then drag the follow on video clips to the end of the appropriate video track. Once that is done, right click on the Multicam icon again and choose New Sequence from clip and your complete project will be ready to edit.
Thanks Mark for the quick response.

How do you place a video clip at a particular location in imovie

how do I place a video clip at a particular location in imovie?

You'll probably have better luck with an iMovie question if you ask in the iMovie forum.
Regards

How do I layer 2 video clips in the same time space/ playing side by side at the same time

I wish to add 2 views of the same subject side by side and playing at the same time. Is this A possible and B if so how do I add the second video clip into the same time space

aggro
What version of Premiere Elements are you using and on what computer operating system is it running?
This sounds like a split screen effect to me.
If so, one view on Video 1 and the other directly above that is the other view on Video 2.
Then crop each so that each occupies 1/2 the Edit area monitor screen.
(generalized since I do not know your program version, see effects Transform/Crop).
I wrote the following in 2011 for a Premiere Elements 8 user in another forum
Your basic tools to achieve your goal are Crop Video Effect and Horizontal Flip Video Effect.
Video ONE on video track 1.
Video TWO on video track 2, directly above Video ONE.
Highlight Video ONE on video track 1, Edit Mode/Effects/Video Effects/Transform/Crop, followed by adjusting the crop under Edit Effects (see bottom of Effects Panel) so that Video ONE occupies the left half of the screen.
Do the same for Video TWO on video track 2, Edit Mode/Effects/Video Effects/Transform/Crop etc. so that Video TWO occupies the right half of the screen. BUT end with Edit Mode/Effects/Video Effects/Transform/Horizontal Flip.
Highlight the video on either side to make adjusts in the Properties Palette and appropriate Panel (position, cropping, etc). But, remember that if you make changes in the "flipped" right side of the screen, Edit Effects/Crop Panel right option will be for left and left option will be for right.
You may or may not need the "flip" part of the effect.
Please review and consider. If I have misinterpreted your question, please let me know with details and I will rethink what you seek.
Thanks.
ATR

How do you make a movie clip face the mouse

How to you make a movie clip rotate so it's always facing the
mouse?

thanks a lot! I got the code to work, I just modified it a
bit.

How do you put homemade videos on an iPod using Windows???

I'm so annoyed. I spent my only phone support call to Apple trying to figure out how to get a home made video clip onto my Video iPod and they have no idea unless you are a Mac user. I have successfully put DVDs on the iPod using DVD Decrypter and Nero Recode but if you want to export a small clip, from Adobe Preimere for example, it seems impossible. Can anyone help???? I have exported a clip from Premiere and it says it's a Quicktime file but when I open the file in Quicktime Pro and "export to iPod" it will be rejected after dragging it to the iPod Library. There are programs to help you complete this task if you are a Mac user but I can't find any solution for PC. Any suggestions? I just want to be able to take a segment of video I made on a minidv camcorder and put it on the iPod. I know how to capture and edit it using Premiere but how do I save/export the clip in a file format that Quicktime and/or the iPod will recognize?

There are many options that work great for windows users. I personnaly use "Video Vault for the IPOD". My home movies where captured to the hard drive as MPEG 2. The above software will accept just about any file (DVIx, XVId AVI, DV, MPEG 1/2, WMV, Realplayer etc.) and format and convert for you. I have over 280 video files currently on my IPOD. The software is not freeware, but you get a good product for your money. It will automatically transfer the file when complete to your IPOD. Music videos take about 1 minute to convert from WMV format. TV shows in MPEG 2 format take about 6 minutes and a 2 hour movie takes about 48 minutes. It has a very fast encoder and keeps your audio and video streams in perfect snyc. Use Google and you can download a trial to try it out. It is really easy to convert videos to your IPOD. You just need the right software. I see so many MAC users stating that us "Windows" users have so few options other than "Videora". While MAc's have some very good software programs, so do we, you just need to find the right one. Good luck and stay positive. Don't hesitate if you need more help to post back.

How do you make one video clip constantly switch colors?

I am trying to make it that one video clip switches from one color then to another color then to another? I also don't want to break up the clip into multiple clips then just change the color on each sub clip because when I tried that, it wouldn't load well in playback because there were so many effects in a couple of seconds. Please help me, thanks!

When you say 'switch from one color then to another color' do you mean you want the clip to show in shades of a single colour ranging from black to your colour and for that colour to change, or that you want the colours of the image to cycle so that red becomes blue, yellow becomes green and blue becomes red?
If it is the 'shades of a single colour' you want, apply the 'Cast' effect from the 'Looks' section of the effects palette and use keyframes to animate the Midtones parameter.
If you want to colour cycle, apply my free 'Gradient Colorize a4d' effect, edit the colours in the gradient and keyframe the 'Offset' parameter which cycles the gradient colours through the image. If you're interested I could create a free effect that could cycle through the colours in a gradient automatically.
Download 'Gradient Colorize a4d' from my blog:
http://alex4d.wordpress.com/2012/03/22/11-colour-fcpx-filters/
@alex4d

How do you rotate a video clip

Is it possible to rotate a video clip in IMovie or in any other application?

karenjmccormick wrote:
Is it possible to rotate a video clip in IMovie or in any other application?
sure
http://help.apple.com/imovie/index.html#mov3a884fd3

How do you put Save as back in the File menu?

I know under File the "save as" is gone. I also know that if you push the option key it will show up under the File menu until you take your finger off the option key. What I want to know is how can you get the "save as" back under the file menu without pushing another key. I had someone tell me how to do it in Mavericks but I can't seem to remember how he told me to do it. I appreciate any help here!
I'm on a 13" MacBook Pro with Retina and running Yosemite.
Thanks

You can try this or do a Google search to find alternatives.

How do you put a video clip in the corner of a picture

Similar Messages

Maybe you are looking for