How do you record soft synth output as audio?

Hi,
I'd like to record the output of a softsynth like the ES-2 into an audio track, so I can then mess with the audio (reversing, chopping up, etc.). How do I set this up? I can't seem to get anything happening so far.
Thanks,
John

Hi John
Mute all other tracks, goto to output 1-2 there is a bounce button. It will bounce the softsynth track to an audio file. you can then add this file to your arrangement.
hope this helps
B

Similar Messages

How do you record addresses for a group in contacts?

How do you record addresses for a group in contacts?

You can't create groups in the contacts app and even if you create a group in icloud.com, the group is useless for email purposes on the iPad. At least I have never been able to get the groups that I create in icloud.com to appears as options for emailing.
There are third party apps that will let you do this.
MailShot
http://solubleapps.com/mailshot/
Group Email with Attachments
http://www.redbits.com/iphone/groupemail/
There is also a workaround where you type all of the email addresses that you want to create a group for in the Notes app separated by a comma,between each address. Copy and paste that one long "email address" in the contacts app and name it whatever you like. Select that as your group when you want to send the group email.
I Haven't done the workaround in ages, so experiment with it first. You may need to leave a space after the comma before you start trying the next email address.

How do you disable "digital optical output" so the red light in headphone jack goes off and I can use the internal speakers?

HI,
I have a red light in my headphone jack and I see "correct responses" listed as "when digital output is enabled speakers are disabled." That's all well and good but doens't really help. HOW do you disable the "digital output," get the red light to turn off and be able to hear through the speakers? What's the SOLUTION to the problem. Sorry, just a bit frustrated. Any help is greatly appreciated.
Best,
dpeast12

Allegedly this can occur if there is a contaminant in the headphone jack that makes the computer believe there is an optical connection there, so it shuts off the internal speakers.
Try inserting and removing a headphone plug repeatedly. This ought to dislodge the junk, and seems to have fixed the problem for others. Hope it helps!

How do you record video with usb mic and have the audio from garageband be the sound when recording and not just your normal voice but garage band effects for youtube?

How do you record video with usb mic and have the audio form garageband be apart of the video when recording, meaning the audio from garageband and echo and not just your normal voice for youtube post?its not add the garageband audio its just normal voice from mic no effects is going thru?

Hi Life93,
What you describe would be possible by recording your video, then removing the audio from it and adding audio from GarageBand once the video is in iMovie (I presume here that you are using iMovie for your video production. Other applications may need different methods.)
See this thread on how to remove the audio from a clip in iMovie -
Is there a way to separate audio from a video c...
https://discussions.apple.com/thread/1779767
To add audio from GarageBand use this article -
iMovie '11: Add a sound clip to your project
http://support.apple.com/kb/PH2255
Thanks for using Apple Support Communities.
Best,
Brett L

How do you record using a phantom mic.

How can I record vocals in the GarageBand using the MacBook Pro?
Thanks.

Hi there etson!
I have just the video for you:
GarageBand '11 - Record your voice
http://support.apple.com/kb/VI200
There are other videos in the Related Videos section that may help you enhance your GarageBand experience. We also have an article online that may help you link up your third-party microphone and record from that into GarageBand:
GarageBand '11: Record sound from a microphone
http://support.apple.com/kb/PH1893
Thanks for coming to the Apple Support Communities!
Regards,
Braden

How do you record an incoming radio program (QT or RP)

Hello, from time to time I come across a great radio feed on one of my widget radios. Is it possible to set up a way to record a show that I am listening to? I have no audo hardware other than my Apple computer.
March 2006 Macbook Mac OS X (10.4.9)

Hi Sam
do you mean you are just running soundflower into soundtrack pro or audio hijack?
If it's audio hijack you don't need soundflower. Personally i'd use audio hijack...much easier. in audio hijack on the left select an application or create one (whichever program streams your internet radio station e.g. safari / realplayer etc) then click on hijack. AHP will then close the hijacked program and restart it - and then you press record and hey presto once audio hijack hears the audio it'll start recording. However, without a licence (which i think is well worth it) after 10 mins of recording some noise will be added to the final recording.
Hope that help
Rounik

How do you move the point where an audio clip attaches to a video clip?

I'm talking about the little carrot that sticks from one clip to another to indicate the point where the cips are syncronized. How do you move their position? Thank you!
Eric

The manual says ...
Adjust the connection point of a connected clip
By default, connected clips and storylines are connected to the primary storyline at their first frame, but you can move the“connection point” of a connected clip or storyline. This is useful when you want to connect a specific frame or audiosample in the connected clip or storyline with a specific frame or audio sample in the primary storyline.
Hold down the Command and Option keys, and click the connected clip (or the gray border of the storyline) at thepoint where you want to position the connection point.
The connection point is moved to the point where you clicked.
For other things ... If you want to move the audio clip in relation to the video clip just click on it and drag it to the left or right. This is when your audio clip is a separate clip from your video clip. If you want to move the audio that is part of a video clip, you first have to select that clip then choose Clip/Break Apart Clip Items then do one of the things listed above. Best wishes.

How to get RECORD data in output parameter of stored procedure

I would like to return some data through RECORD structure from stored procedure.
I have defined the RECORD as below:
type ShipmentStatus is record(
Booked integer,
OnWater integer,
OnRoad integer,
InAir integer,
OnRail integer,
InWarehouse integer,
Idle integer);
the stored procedure is defined as
create or replace procedure SP_MC_GET_SHIPMENT_STATUS
iCustId in nvarchar2,
oResult out ShipmentStatus
I can get result in Sql*plus or PL/SQL developer, but I failed in get the result in Toplink.
How can I get the output result, and convert it to an ENTITY by Toplink?
Could you give me some advices on how to do mapping, how to call the stored procedure etc.., or code snip?
Your answer is deeply appreciated. :)

I'm not sure it is possible to get the PL/SQL record type through JDBC. Please try to access this procedure through JDBC to see if it is possible.
You may need to convert the record type, to an object-type, i.e. wrap the procedure in another procedure that converts the record type. You could also just wrap the procedure in another that expands the record values into individual output parameters.

How can you record stream from a webcam like YouTube does it

We need to create a webcam stream recorder with FMS which should be able to record stream in some predefined quality (128000/bandwidth,95/quality) and will work also in the situation when the user doesn't have enough bandwidth to transfer this stream in realtime. YouTube has a solution which is using something like a buffer and when the user stops recording they continue to send video data to the server until the stream is completely recorded. We are recording the stream from our user's webcam, but when the bandwidth is not consistent or not enough, we are losing video data and ending up with poor quality recordings. What we need is that the record stream is buffered on the user's computer and the video data continues to be sent to our server even after the user has finished recording so that we end up with the complete stream (video data). We need some idea how to do this - which specific features should we used for this solution?

Does it have to be a live solution? Or can you have the user record locally and then upload to your FMS server?

How do I record a numeric output values and then use them?

So at the moment I just have a numeric value being display with a numeric indicator. I want to record this value somewhere for later use. Such as doing calculations. I want to store many numeric values that are outputed to this single indicator at different times and then pull them from the stored place and use them. I don't know much about arrays and storage stuctures in labview. Can someone give me some directions please? Thanks

So there isn't really anything related to the question yet in may code.
My code shows movement control for a motor.
I have a forwards button which increments +1 for every iteration of the loop. Each loop sends a pulse to the motor to move it.
I have a backwards button which increments -1 for every iteration of the loop. In this loop i have just placed the direction pulse which tells the motor to turn the oposite way.
these increments add onto a counter which is shown as the numerical indicator, used to show the position of the motor.
I also have a reset button on this motor. To change the position to zero.
So now what i want is to put the value of the position of the motor into an array which will then stay at that value in the array even when the position moves again. So i can record different positions.
I then want to use these values. so i want to know how to get them from the array to the Number of iterations for a For loop so i can move the motor by that amount.
Your help is appriciated, ive already spent so much time getting to this stage.
Attachments:
Xaxisbutton.vi ‏15 KB

How do you record an external Midi Instrument + Software instrument track down to a combined Audio track ?

I have two piano sounds I'm trying to blend into one. One is an external MIDI module set up as an external instrument within Logic and the other is a software plugin instrument (Ivory II). I'm trying to record the blended pianos into a single audio track so I can ditch the midi track and more so the CPU intense software Instrument track (it's killing my setup....). For the life of me I can't figure out how to assign both these entities as inputs and get them to record simultaneosuly onto an audio track.
My setup is a Presonus Studiolive 16.4.2 with the following assignments:
The external MIDI module's audio output is routed stereo directly into channel strips 9 and 10. By default the firewire output of this channel strip is returned to firewire outputs 9-10 on the studiolive, but this really doesn't matter since recorded audio is being monitored thru the main output buss assigned to channels 17 and 18.
My software plugin (Ivory II) is routed to output channels 17 and 18 which is the default setting for routing the output to the master buss for the Presonus.
On my audio track that's setup in Logic I can assign the inputs to 9 and 10 and I get the external midi module's output to record, but I cannot find any way to get the software instruments output into this mix because there is no input assignment for this.
Is there any way to combine these two entities and assign them to record onto a single audio track or am I missing something here? If there's no simple way to do this, can somebody offer any tip or ideas on how to accomplish the same thing here. I really need to ditch the software plugin. My setup only seems to be able to handle one plug in at a time on the software instrument side. Not sure why that is because my setup is not that old and the memory on my MBP is maxed out at 4GB....but that's another topic of discussion
Any suggenstions would be much appreciated...

Thanks for the reply....
I actually tried freezing the software instrument track and that had little if no effect on CPU. I then read in the book or somewhere that the freeze function really only works on effect plugins. Don't know if that's true in all cases, but that seems to be what's happening. Still would like to combine these tracks and I'm guessing I'm going to have to get creative with bussing or subgroups to make this happen. Unfortunately I think the fact that my Presonus board has hardmapped output routings for all the inputs makes that difficult, but haven't actually tried yet. I'm thinking if I can reroute the midi modules audio output input into the Presonus to a subgroup and then route the software instrument plug in to the same subgroup that I can then mix/capture this and hopefully route the audio's input to the subgroup to pick up the mix.
Does this make sense to anybody reading this?
We'll see and I'll post the results if it works....
thanks...b

How would you record overdubs on FCP files?

I have about ten hours of footage for a doc I had translated. I have a guy coming over to do overdubs, and I just realized I don't know how I am going to have them recorded! FCP can't record them right? Any suggestions for software or other ideas. I would love to have something which was somewhat integrated so I don't have to export all ten hours of footage from FCP.

Here's a link to a freeware program called Audio In. It's about the simplest tool you can use for voice over. It records AIFF files that easily import to FCP.
http://www.versiontracker.com/dyn/moreinfo/macosx/15962

How do you record cassette tapes onto your iPod?

Does anyone know how to get music from all my old cassette tapes onto the iPod?

There are cassette players that can connect to computers. From there the audio can be recorded to mp3 file using software that comes with the device. Another option is to pay a company to do the conversion for you.
I have been considering this myself because I have some old tapes for which CDs were never released. Don't even know if the tapes are in good enough condition to make the conversion worth while.

Apple Loops - How do you change the monitoring output?

Anyone know how to change the default output of the Apple Loop player to another output (eg. 5-6), or is this just wishful thinking?

Very easy. Go to the mixer tab, and select the ALL button at the top of that window. You should see a channel strip called Prelisten, usually on audio channel 256. Change that output to whatever, and that will change the monitoring output for loops, the bin, and the Sample Editor.

In photoshop Elements 10 how do you calibrate colr/density output to Epson Artisan printers?

The colors printed by my Epson artisan printer, particularly the blues and greens, are not true to the photoshop colors, and the Epson prints are darker, denser, and have substantially less [punch than the screen images.I have tried about every setting there is onthe Epson printer drivers under abobe RGB, ICM, and Epson rpint options with little or no effect.

You'll want to read some very important information about Color Management to understand what your settings are doing and how to choose the correct ones, as well as making sure your computer is properly prepared.
Preparing to print from Photoshop

How do you record soft synth output as audio?

Similar Messages

Maybe you are looking for