How do you redo a fingerprint?
Original thumb print does not work consistently. I have used up 5 fingerprints in total. How do you redo one that isn't always being read properly?
How do you redo one that isn't always being read properly?
Have you tried deleting one yet? Just swipe to the left.
EDIT: OP answered his own question while I was typing.
Similar Messages
-
How can you redo initial system setup macbook pro
How can you redo initial system setup macbook pro?
Like when Setup Assistant fires up and lets you migrate? In general, that would imply having to do a complete reinstall. And I've always been under the impression that when you do that, the reinstall software does not contain all the extra goodies that come with a new from-factory install (such as iLife).
But as Prof. Kappy wants to know, the specifics are very version dependent. -
How do you write UNDO for a text item?? examples? or a REDO??
How do you write UNDO for a text item?? examples? or a REDO??
I created a pop-up menu with CUT, COPY, PASTE, UNDO, CLEAR for my text items.
Using MAGIC menu type works great but there is no MAGIC for UNDO or REDO.....
How do you write UNDO for a text item?? examples? or a REDO??
I have Oracle Forms 6i...
Lets say I highlight all the text in the text item, and start typing over it... then I realize OH NO it is the wrong text field...
Now I want to UNDO the typing and get back to the previous text.
I'd use the initial value that was populate right? How do I access that if that is correct?
Thanks, BillYou can use;
<ITEM> := Get_Item_Property(<ITEM>,DATABASE_VALUE);
Or you will have to write a pre-text-item trigger;
PRE-TEXT-ITEM:
:CTRL.CURRENT_VAL := :<BLOCK>.<ITEM>
MENU (PL/SQL):
:<BLOCK>.<ITEM> := :CTRL.CURRENT_VAL;
You may also want to set the item property back to ITEM_IS_VALID so that item validation does not fire again. -
How do you change your thumbprint for iPhone 5s?
How do you change your thumbprint for the iphone 5s?
Go to Settings > General > Touch ID & Passcode, enter your passcode, then Turn Passcode Off will delete all current fingerprints. You can then turn passcode back on and enter fingerprints.
Rather than deleting, you can also add the same fingerprint a second time via "Add a fingerprint" in Settings > General > Touch ID & Passcode, enter your passcode, then Touch ID. -
Hello I'd like to know how to walk redo my iMessage on my ipod touch 4th . I connect and then says to choose an email address and it says < Check> and this is the me that his brings back on the menu. So please help me!
You can try
FaceTime, Game Center, Messages: Troubleshooting sign in issues
However, some other users have reported that did not work. No real solution has been posted here yet -
How to change redo log size in oracle 10g
Hi Experts,
Can anybody confirm how to change redo log size in oracle 10g?
AmitDear Amit,
You can enlarge the size of existing Online Redo log files, by adding new groups with different size of files (origlog$/mirrlog$) and then carefully droping the old groups with their associated inactive files.
Please refer SAP Note 309526 - Enlarging redo log files to perform the activity.
Steps to perform:
STEP-1. Analyze the exisiting situation and prepare an action plan.
A. You have to ensure that no more than one log switch per minute occurs during peak times.
It may also be necessary to increase the size of the online redo logs until they are large enough.
Too many log switches lead to too many checkpoints, which in turn lead to a high writing load in the I/O subsystem.
Use ST04 -> Additional Functions --> Display GV$-Views
There you can select
Gv$LOG_HISTORY --->for determing your existing LOG switching frequency.
GV$LOG -
> list the status(INACTIVE/CURRENT/ACTIVE) /size/sequence no. of existing online redolog files
GV$LOGFILE --- > list the information of existing online redolog files with their storage paths
You can document the existing situation of Online Redo Log Fiile management before going to enlarge Redo Log Files.
It will be helpful, if something goes wrong while performing activities.
B. Based on above Situation analysis, Plan your New Redo Log Group and there Members with new optimal size.
e.g.
Group No. Redo Log File Locations u201C/oracle/<SID>/u201D Size
/origlogA /mirrlogA
15 log_g15m1.dbf log_g15m2.dbf 100 MB
17 log_g17m1.dbf log_g17m2.dbf 100 MB
/origlogB /mirrlogB
16 log_g16m1.dbf log_g16m2.dbf 100 MB
18 log_g18m1.dbf log_g18m2.dbf 100 MB
Continue to next..... -
Using RMAN, how do you restore from an old backup file?
HI,
I use Oracle 9i on Solaris.
I'm currently doing incremental level 0 hot backups every night using RMAN in NOCATALOG mode. The controlfile is backed up with the database. I back it up to a file (e.g. "level0_20041225.dmp"). After I back it up, it's backed up to tape using Veritas. Before doing a backup, I delete the old one first.
I need to restore a copy of the database backup that was taken a month ago. This file is on tape. How do I go about it using RMAN? The documentation is not too clear as it talks more about Restoring the control file and the latest copy of the database.
How do you restore an old copy of the database from a database file?
Pls advise
ThanksYou can recover to the last committed transaction,
provided you have the current controlfile, archived
logs since the backup and the current online logs.
Here's the procedure in a nutshell:
a) Restore datafiles from tape.
b) Recover database using restored files + current
controlfiles and archived/online logs. RMAN will prompt
you for the logs it needs for recovery.
You can also perform this type of recovery using a
backup controlfile. In this case you would still need
all logs as above. After recovery, you would have to
open the database with RESETLOGS because you are using
a backup controlfile.
If you don't want/need to recover up to the last
committed transaction, you use a backup controlfile and
perform incomplete recovery (time or change based). This
simply means that you stop the application of redo at
the time or SCN of your choice.
Most of the scenarios of interest are documented in
the following book:
http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96566/toc.htm
Hope this helps.
Kailash. -
How would you configure your database?
How would you configure your disks with those specifications?
General Database Characteristics:
os is Oracle Enterprise Linux 64 bit
Enterprise Edition
180GIG size database.
High "oltp" environment.
Estimated growth of 40 to 60GIG/year
20GIG of archivelogs/Day
Flashback time is 24 hours:120GIG of flashback space in avg
Local backup. Full database copy, then incremental is the preferred method.
That way, if a datafile goes bezerk, replace with backup datafile then recover.
Or if only a few corrupt block, block recover with rman.
BTW: Backup is done locally first, then send to another server, than on tape.
Archivelogs is duplexed on another server.
General Hardware Info:
Server Platform: Dell PowerEdge 1950
16 GIG RAM
2 * 64 bit CPU's
2 * local 300G/15rpm disks
Storage: Dell PowerVault MD3000
15 * 300G/15rpm Disks
Possibility for 17 disks here.
Here is my configuration so far:
OS+ oracle binary + Online Redo Logs Copy 1 + Control File Copy 1: 2 disks raid 1
flashback + backup + Online Redo Logs Copy 2 + Control File Copy 2: 4 disks raid 1 or 10
archivelogs: 2 disks raid 1
Temporary Datafiles: 1 disk no raid
UNDO Datafiles: 2 disks raid 1
Datafiles 6 disk raid10
total 17 disks: + spare disks on the side of one ever fails
1) How would you configure it with those specs?
2) Is there missing info to make a particular decision?Here is my reply concerning data separate from index files:
See http://www.dizwell.com/prod/node/751 for the complete article.
"Why wouldn't you keep indexes separate from their tables?! Because doing so makes no difference to performance... and I patiently explained that a table and its index are never accessed simultaneously by a single user so that contention between them cannot arise. And yes, in a multi-user system, of course the two could be accessed simultaneously -but so could two tables, or two indexes. " -
My new (2 months old) 5s fingerprint recognition sensor does not work. It worked well when I first got it but now to get it to work I have to redo my fingerprints every few days, which completely negates the convenience and cost of the phone. I have tried all the tips and they help a little but it always stops working and I have to redo my fingerprints. Does Apple read these comments? Is there an app that might help?
Apple does not read here.
If you want Apple to know send feedback
http://www.apple.com/feedback/iphone.html
I also have iPhone 5s on day one and it's working since. When it's not registering, I just clean the Home button and it works straight away.
Did you try when registering fingerprint using all angles? It should learn the more you use it.
Did you clean the sensor with a soft cloth?
http://support.apple.com/kb/HT5883 -
No IPTC caption on import!- How did you migrate xl-library to Aperture?
Folks,
How can you possibly migrate a 100.000 plus image library into Aperture without having to completely redo the IPTC captions after import?
I find my images mainly by IPTC searches (so far iView pro) which to me represent years of captioning work.
Now that 1.5 has finally given us more control to reference our library I started to get excited again about Aperture, but IPTC only on export is not enough IMO.
How did you manage to ideal having DAM and Raw processor in one app?Thx Jeremy,
did you get hold of a copy of Adam's new version that
covers iView 3.1 and Aperture 1.5 or did you use
their older version?
Could you in any way keep the organixational
structure of iView's "Category Sets" when you
exported all your stuff into Aperture?
best regards,
grischa
Hi again. To explain better what I meant - I didn't use Annoture, I just used the function in iView itself whereby you can "synch" the metadata that you add in iView back to the file itself, so it is stored within the image file. Then when you import that image file into Aperture, the information is correctly read.
There is one problem - iView uses some fields that (I think) are not read by Aperture (Location, maybe ??) or that are not used correctly (iView stores "People" in the "Contact" field for example) However, there is also a script in iView that allows you to copy metadata items from place to place, so you could copy the iView Location field to Keywords, so that it is seen by Aperture when you import it.
Hope that makes sense!!
regards,
Jeremy -
How to calculate redo rate,transaction rate and Average redo write size
Can anybody tell me how to get redo rate,transaction rate and Average redo write size other than statspack.
thanks raghu,
But can you tell me where it is in OEM. Preferably can you give me SQL queries to get these stuffs. -
tell me plz
1. yes i got it
BUT i dont see any button or link
to do THAT EITHER
maybe you CANT DO IT FROM AN IPAD1?
THIS IS WHAT I M ASKING!
OR ELSE HOW CAN YOU SELECT WHETHER IT WAS HELPFUL!!
2. of course not
but i kind of felt like a moron
because of the criticism regardless the
fingerprint modd free app
i know its too simple and silly
and there are far too many complex and special apps
but it kinda made me feel giggly for like 10 seconds
and then i kinda felt offended as if i were guilty of something
when i read these two comments in the greek store
about how moronic the app is
and why apple even allowed it to be
maybe a psychotherapist is more competent to advise me correctly:P
but still i would like to know the answer on the first part of my question! -
How do you pint from pad 2?
How do you print from ipad 2?
You can also get applications like Printopia (Mac OS X only) or FingerPrint (Windows and OS X).
Let me know if you need more help. -
How do you remove buttons icons from a large pdf all at once?
How do you remove buttons icons from a large pdf all at once? I have a 1400 + pg doc that I am updating. It has icon buttons to return to the home page on each page but they were not duplicated properly and when you scroll through the doc, the buttons dance around. Now I want to redo these buttons but hate the idea of having to go to each page to delete the icon button so I can start new. Can it be done all at once?
It's probably worth adding to try67's suggestion above that, if you're using the first option, you need to make sure the page display is continuous. (If you've got it set to view a single page only, Command+A will only select the fields on the active page.)
-
How do you invoke Edge Web Fonts?
Assuming this is available in this release, how to you bring up the Edge Web Fonts capability?
Hi Phil,
You should be able to trigger the code hints manually anywhere in the font-family value by pressing Ctrl+Space. It should also pop up automatically if you type "," followed by a space anywhere in the value. Are those approaches not working for your code? (If so, please post a snippet of your CSS here so we can investigate).
- Peter
Maybe you are looking for
-
Trouble with CS2 on Mac G5 with new user accounts - activation issues?
My system is a Mac G5 Quad running OS 10.5.8, and I have the CS2 premium suite. When I bought the machine I did everything under one user account. Several months ago the account started giving me a few problems, and my circumstances changed, so it ma
-
Shuffle 1st gen works only in usb port, 2nd gen shuffle isn't noticed
I am aware these problems have not been solved anywhere on the internet but im praying someone has the answer to it.....maybe even someone from apple (but i dont think they care) Lets start with my 1st gen shuffle 2 years ago it was accidently washed
-
Hi, I have ORACLE XE with APEX 3.1. I have had no problem with the setup until today when I accessed the image folder via http://127.0.0.1:8080/i now if I try and log in before I even get the home page with workspace, username and password I get a wi
-
SPI Example Not Working (SCLK, MOSI, CS)
I have been working with the single port SPI example. I have it ported to a cRIO-9075 with a NI 9401. In the example there is a pin used for an enable bit for a motor. I set this up to test and am getting an output on this pin. The other pins for SCL
-
FF won't load pages, nearly at all. Some websites will partially load, but then will suddenly stop. In order to get the pages to fully load, I'll click Tools and open the Options menu, then I'll close the menu, resulting in the webpage loading up sli