How do you register your mobile number with imessaging?
When I want to send something to my phone from my ipod.. it won't regiser my mobile number? Why? Like I've tried, and it will only allow my e-mail to go threw.
Turn off iMessage then turn it back on.
You do have an iPhone and you are in the wrong place?
If not, you can't send from your mobile number on your Touch.
Message was edited by: deggie when I realized I was in the Touch forum.
Similar Messages
-
How do you use your phone number for iMessage?
I'm having trouble using my phone number for my iMessage and FaceTime, it won't let me click the option.
Hello Maaaybay,
You may need to unlink, then re-link your phone number for use with iMessage.
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
Allen -
How can you register an email ID with iMessage?
I want to send messages to my friend from my macbook pro retina. he has an ipad 2. but when i type his email ID in the new message place it says that the ID is not registered with imessage? he doesnt know how so solve i, so could someone tell me how to fix this problem?
Thanks!He should go to Settings -> Messages on his iPad and make sure he is signed in with the e-mail address he wishes to use. More information here: http://support.apple.com/kb/ht3529
-
How do you change your phone number in your iPad messages and replace it with another number. In order to send and receive messages to the correct phone number?
It's best to use an email address on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
How do you find your phone number?
How do you find your phone number?
You can't. The iPod tuch does not have a phone number. For the Messages and FaceTime apps you use the email address that yu set them up with. With some oher texting apps like Text+, the apps assign you a phone number.
-
My 3rd iphone is a 3GS. I did not buy this one from the apple store, how do I register this serial number with my apple account? it is already sync'd and it and will preform every function except email to my home computer. It says apple ID disabled, also will not update my apps, same promt apple id disabled.
anyone know where I can go to register this phone? Thankshttps://register.apple.com
-
How do you add a mobile number and a home number to a contact on a 4S
How do you add a mobile number and a home number to a contact on an iPhone4S?
First add the mobile number. Once you've done that there should be another field that shows 'iPhone". Tap on 'iPhone' and change it to 'Home' then input the home number.
-
Ichat is gone how do you see who is online with imessages
ichat is gone how do you see who is online with imessages I noticed this the other day! how Do i know who is online from like gmail, MSN or other
cmd 1 shows online contacts and cmd 0 shows messages
you can activate different accounts in preferences cmd , -
How do you find your text number on ipod touch
How do you find your number on the ipod touch!
You don't find it. You have to define it.
Settings>Messages>
> iMessage > ON
> Send Read Reveipts > ON or OFF your choice
> Received At > [email protected]
Enter your valid email address in the "Received At" field. -
How do you register your education edition of lightroom
I have a Mac without a DVD. I purchased the lightroom DVD education copy but ended up downloading a 30 day trial. The trial period is coming to an end and I need to complete the task of registering the education copy and inputting the product code. How do I register the education copy and input the product code?
When I purchased my academic edition, there was a yellow card inside the box with instructions for submitting the information required to receive the serial number. Basically, you need to submit an academic e-mail address and academic picture ID. The link to where to submit that information was on the yellow card. After I submitted the information the serial number was sent to me within about 5 min.
-
How do you specify a line number with getline() (c++)
How do you specify which line for getline() to read with c++ similiar to how awk uses $1, $2, $3 , etc etc...
Example:(Ignore the underscores)
Line1 Line2
10____10
20____20
30____30
40____40
if I were making a program to remove 10 on the first line and 20 on the second line how would I tell getline which line to read
Example source code:
#include <cstdio>
#include <fstream>
#include <string>
#include <iostream>
using namespace std;
int main()
string line;
string line2;
ifstream in("/Users/lundquisted/Desktop/infile.txt");
ofstream out("/Users/lundquisted/Desktop/outfile.txt");
while( getline(in,line) )
if(line != "10")
out << line << endl;
while (getline(in,line2) )
if(line2 != "20")
out << line2 << endl;
in.close();
out.close();
remove("/Users/lundquisted/Desktop/infile.txt");
rename("/Users/lundquisted/Desktop/outfile.txt","/Users/lundquisted/Desktop/inf ile.txt");
return 0;
}Eric Lundquist wrote:
store the output of a system() command within a c++ program to a string and/or variable
A number of apps call Unix utilities and capture both stdout and stderr, typically for viewing in a log window, but for other uses as well. Xcode, for example, starts up gcc and does various things with the text that gcc might otherwise print in a Terminal window. Most apps that rely on Unix commands that way don't use "system()", which is a rather crude way of launching utilities that leaves the parent program with very little control. Usually, the best way to manage helper utils from a Cocoa app is by using NSTask and NSPipe. If you spend some time with the two following pages, you'll learn how to do almost anything you want with command line utils from inside a Cocoa app:
[http://www.cocoadevcentral.com/articles/000025.php]
[http://macosx.com/forums/archive/t-3927.html]
The first link goes to a great tutorial on using NSTask. Capturing stdout and stderr are only covered briefly towards the end, however. Note the last comment explaining why "system()" is a bad idea.
The second link goes to a forum thread. Scroll down to the code posted by "blb" for some very clear examples of launching with NSTask and reading the output with NSPipe.
If you really want to use a shell command, you could give NSTask a command like ' +bash -c "ls -lt | grep drwx"+ ' (see how setArguments: is used in the tutorial).
If you just want to do something cheap and dirty with "system()" so you can see some awk output while you're learning how to do things the right way, I guess you could do something like this:
system(" cat ~/random.txt | awk '{print $2}' > MyFile.txt");
NSString *myString = [NSString stringWithContentsOfFile:@"MyFile.txt"
encoding:NSUTF8StringEncoding error:nil];
Of course you can just read MyFile.txt into cin if you're not using Cocoa.
- Ray -
How do you mark your 'in' point with the keyboard?
I know you can mark the first frame of your selection by hitting the mouse button but I find I press the spacebar to start previewing the source footage and stop the playhead at just the right point where my 'in' should be. Now as soon as I move the mouse the playhead jumps to a different part of the clip, this results in me losing my 'in' point.
What I want to do is hit the spacebar to stop at just the right point, hit a key to mark my selection, hit spacebar to resume playing and then finally hit shift-A to mark my out. Any ideas?
Thanks,
DaveCould you describe your workflow in producing Quicknotes.
Basically I use a screen/system audio capture application to capture what I am doing in an application along with any audio being produced. There are many such applications available, but I tend to stick with Snapz Pro X which I have been using for years. My somewhat old PPC G5 limits me to captures of about 960x540 at 24 fps. This step, of course takes place in "real time." With iMovie '08, I would had to transcode the captured data to compatible compression formats, but with iMovie '09 it looks like I can go back to using the default Animation video codec which I prefer.
Once the screen captured data is stored to a file, I bring it into iMovie for a quick edit -- usually just a quick trimming of the length, adding a title, and adding simple opening/closing cross-fades. When done, I output the edited content via the "Export Using QuickTime" option -- normally as AIC/AIFF but will likely try Animation/AIFF on my next one. The editing process takes only a few minutes but exporting adds additional time.
At this point I import the edited file to GarageBand for a quick voiceover. I use this approach so I can keep a copy of the iMovie exported file for reuse at some later time. (My original intention was to eventually go back and correct my voiceover mistakes but I never seem to get around to doing this as some new project is always coming up.) For this step I generally use a Blu "Snowball" USB mic. In any case, the voiceover is also in real time. I normally export the finished file using the "Full Quality" mode so as to avoid a further transcoding of the video track. (It also saves time if no video re-compression has to be performed.)
At this point it is merely a matter of targeting my final output. For my web content, I usually use MPEG Streamclip to convert the GarageBand file to an H.264/AAC file with a targeted video data rate of 1.0 Mbps. If I decide to post the file in an MOV file container, I then open the file in QT Pro and set the "poster frame" for iWeb use. If for any reason I wish to preserve the MP4 container, I use iTunes to "poster frame" the file.
As previously implied, I use iWeb to actually post the file. In this case, the tutorials are posted to a separate "Podcast" page collection since the are easy to maintain; allow user comments, RSS notifications (which I've never tested), and searches (also untested). Primarily I liked the ease with which I can duplicate a previously posted video entry and simply drop in the new clip and modify the text changes. Posting the update is, of course, as simple as pressing an icon button and waiting got the upload to finish.
I have completed the work flow in as little as an hour but my average is closer to 90-120 minutes since my wife and/or pets usually want some sort of attention during the process. You may have noted Gracie (a Congo African Grey) or Mango (an Amazon Orange Wing) in the background of some of my voiceovers. And that, as they say, is all there is...
You should really consider posting these on YouTube.
Not really something I ever wanted to do. I have my own MobileMe account, most viewers I'd want to reach are Mac owners and users, so I am not really interested in reaching out to the "world at large." -
How do you get your serial number when you don't have your ipod
I was running and then I dropped it and I lost it i went to your website and I'm trying to find it but there saying i need the serial number how can I get the serial number please send me a message back
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
-
HT3529 How do you register a phone number for sending imessages from an iPad 2?
How do I add my cell phone number in iMessages so it is registered to send an iMessage to?
Thank youFirst of all: Tell her to switch back to iPhone it's SOOO MUCH BETTER ! Anyway, try this:
It should say "Receive at 2 addresses." Click on this, delete any unwanted phone numbers. -
How do I update my ipod touch with out losing all my apps,music,pics ect?
Just do the update on your syncing computer. All the items should be in your iTunes library or, for synced photos, on the computer. The items will be synced back to the iPod during a latter stage of the update.
Maybe you are looking for
-
I used to go to gmail all the time. Now it says "Not Found" whenever I go to gmail. Is there a reason for this and is there a way I can access gmail again? == URL of affected sites == http://gmail.com
-
How do I view templates in English in the Pages program?
How do I view templates in English in the Pages program?
-
Bring back preservation of animations when creating PDF from Power Point
I understood, that PDF maker allowed for MS Office 2003 Power Point an option of preserving animations, and then since MS Office 2007 this option is gone. I rely just on description of that, and I personally never tested this functionality in Power P
-
User exit for Tcode F-22.
Hi guys. is there any user exit fot T-code F-22 to avoid duplicate invoice?
-
how do I get a link to share a file?