How do you release the session in session method?

how do you release the session in session method
Title was edited by:
Alvaro Tejada Galindo

Go to SM35, select the session and click the process button.
Thanks,

Similar Messages

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

I recently switched from an iPhone to an Android phone. I cannot receive text messages because Apple will not "release" my number from iMessage. I see others have had the same issue. How did you solve the problem, if you did?

This tech note addresses your problem: iOS: Deactivating iMessage

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How can we release the locked objects..

Hi,
I have created some objects such as pages and iviews in the portal. If i edited any of the object, then when next time when i access the object, I am hgetting a message as object is locked by admin, you canot edit it. Infact, I have logged in as admin.
How can we release the lock of objects?
Your help and suggestins solicited...
Best regards,
Sudhesh...

Login as the Portal Administrator.
Go to System Administration > Monitoring ->Detailed navigation -> Object Locking
Here you can find all the objects that are in locked state.
Now to unlock, tick mark the object that you want to work with & click on the "Unlock" Button.

How do you get the page count on an old hp 1012 laserjet printer?

How do you get the page count on an old hp 1012 laserjet printer?

You should find this information on the configuration page. To print a configuration page, press and hold the green GO button until all of the lights cycle, approximately five seconds, then release the button. The Configuration Page will print.
You can find more information in this document: Identifying Page Count.
I am an employee of Hewlett Packard.
- - Please mark Accept As Solution if it solves your problem so others can more easily find the answer - -
- - Please click the Kudos star if you would like to say thanks - -

Where or how do you get the 2.0 update?

I got the latest version of itunes, the latest version of software for ipod touch but I still can't find the "APPS" tab in the preferences setting. How do you get the 2.0 update? I had the same problem with the other update when I first bought this thing. Apple is really ******* me off.

Ya know i would just wait because they dont HAVE to release it today, tommorow, or in the next year if they want too. Maybe they have a new idea and want to add that so you need to be patient... i know we were all dissapointed when i didnt come out in june but just shut your virtual mouth and wait!
Take a chill pill and relax...
Just a few more hours...
-Naghamster

I need to create buttons in which the color changes, and stays on after you release the button

I need to create buttons in which the color changes, and stays on after you release the button. The hard part is the buttons must change independently of each other.
To get an idea of some of things I’ve tried I’ve tried making the movie with two frames.
When I click the button it switched to the new frame which would show a movie clip,
Unfortunately all buttons would change color together and don’t see how to make it so that they change independently.

you must use movieclip buttons and code for their frame changes.

How do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

how do you repair the EFI systems partitions when you mac tells you that the live file system is not supported?

I don't have good news. You will need to repartition and reformat the hard drive in order to determine if the drive is still OK or if it needs to be replaced. If your computer is a 2011 model or later do the following:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
If your computer is pre-2011 model, then locate the original installer discs that came with the computer. Then do this:
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. You can now download a version of OS X from which to upgrade from your Purchases page in the App Store.

TS1463 how do you put the ipod into disk mode

how do you put the ipod into disk mode

iPod nano (7th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Home buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, press and hold the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod nano (6th generation)
Before placing the iPod into Disk Mode, verify that it has a charge.
Reset the device by pressing the Sleep and Volume Down buttons simultaneously until the display turns black. This should take about eight seconds.
When the display turns black, hold down the Volume Down and Volume Up buttons simultaneously until the device enters Disk Mode.
iPod devices with a Click Wheel
If necessary, verify that your iPod has a Click Wheel.
Before placing the iPod into Disk Mode, verify that it is charged.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Menu and Select buttons for at least six seconds, until the Apple logo appears.
When the Apple logo appears, release the Menu and Select buttons and immediately press and hold the Select and the Play/Pause buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod will should say "Do not disconnect".
If you are having difficulty putting your iPod into Disk Mode, set it on a flat surface. Make sure that the finger pressing the Select button is not touching the Click Wheel. Also make sure that you are pressing the Play/Pause button toward the outside of the Click Wheel and not near the center. If you are still unable to put your iPod into Disk Mode, use one finger from one hand to press the Select button, and one finger from the other hand to press the Play/Pause button.
Older iPod models without a Click Wheel
Before placing the iPod into Disk Mode, verify that it has a charge.
Toggle the Hold switch on and off (set it to Hold, then turn it off again.)
Press and hold the Play/Pause and Menu buttons until the Apple/iPod logo appears, then release them. This resets iPod. When you reset iPod, all your music and data files are saved, but some customized settings may be lost.
When the Apple logo appears, immediately press and hold the Previous and Next buttons until the Disk Mode screen appears.
Connect the iPod to your computer; the screen on the iPod should say "Do not disconnect".
source: Putting iPod into Disk Mode

How do you UNLOCK the orientation? Accidentaly locked as protrait & want to retrun use of landscape Manual does not say how to undo.

how do you UNLOCK the orientation? Accidentaly locked as protrait & want to retrun use of landscape Manual does not say how to undo.

Bring up Control Center. Do that by swiping up on the home screen starting down just above the home button.
Rotation lock is on the bottom row, the second icon from the left (just to the right of the flashlight).
Click it to release it.

How do you update the ipad 4.3.5 with a computer?

how do you update the ipad 4.3.5 with a computer?

Update it from iTunes on a computer as described at the bottom of this article; there isn't a Software Update option in General on iOS versions prior to 5.0. It can only be updated directly to the newest iOS release supported by the device’s hardware, which is iOS 7.1.1 for devices with at least 512MB of RAM.
The maximum iOS version for the third generation iPod touch and original iPad is 5.1.1.
If you don't know what device you have, append the last three characters of its serial number to http://www.everymac.com/ultimate-mac-lookup/?search_keywords= and load the page.
(108171)

How do you lock the screen on iphone 4?

How do you lock the screen on iphone 4 while on a call? I mute calls, activate face time and I have even called someone by accident during a call. I know there has to be a way to fix this. Please HELP!

It locks automatically when you hold it to your head.
If it fails to do this, then remove the case and see if it solves it.
If it does not, then do the basics - restart, reset, restore.
If that does not solve it, then make an appointment at the genius bar.

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

Hi,
Use NVL or COALESCE:
NVL (col_a, col_b)
Returns col_a if col_a is not NULL; otherwise, it returns col_b.
Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How do you use the wdeploy tool in iPlanet Web Server with Windows 2000 Server?

I found this on the knowledge base, but only described how to use this with Unix. Does this work with Windows? How do you set the IWS_SERVER_HOME environment variable as well? I don't see it in the file.
Thanks

Hi,
This is pretty common scenario. The best way to achieve this is to split your servers using a collection and deploy a different client settings. You could target your collection using the OS or an OU in AD. There are many option there.
You could also limit the access to the Server collection using Role Based Access to avoid any human "errors" on these collections. Users without rights to these collection just won't see them.
https://technet.microsoft.com/en-us/library/gg682067.aspx?f=255&MSPPError=-2147217396
http://blogs.technet.com/b/configmgrteam/archive/2011/09/23/introducing-role-based-administration-in-system-center-2012-configuration-manager.aspx
Benoit Lecours | Blog: System Center Dudes

How do you modify the web.xml to lock down the pages from a user role

how do you modify the web.xml to lock down the pages from a user role

I'll make a stab at your question:
The following is an example of where a URL is protected within a web.xml deployment descriptor. In this example, the URL /protectedA within the application is protected:

<security-constraint>
<web-resource-collection>
<web-resource-name>protectedA</web-resource-name>
<url-pattern>/protectedA</url-pattern>
</web-resource-collection>

<auth-constraint>
<role-name>sr_developer</role-name>
</auth-constraint>
</security-constraint>
Sun's explaination here:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security4.html

How do you release the session in session method?

Similar Messages

Maybe you are looking for