How do you remove a final cut pro 7 license and re-enter it ?

I tried removing the FCP7 license to be able to re-enter it by removing the final cut file in this folder:
Library >Application Support> ProApps >Final Cut Studio System ID
but it didn't seem to work, is there a step I'm missing?
thanks in advance!

Trash you preferences and delete that file again. If it fails I would move all files out of the proapps folder to desktop, then boot FCP, authorise and re-drag in any files that are missing.
Also make sure to not have any ProApps (Logic FCP etc) running while you do this.

Similar Messages

How do you watch a Final cut pro movie on TV

Hi i'm new to FCP I have just put together a holiday movie using my Mac book pro and FCP ver. 10.1.3 using both stills and movie clips i'm struggling with the following can anyone help
I'm trying to save the movie on my portable Toshiba hard drive without any luck as i need to free up some space on my laptop as I have the movies i'd like to make I can then use the PHD with my desk top mac to hopefully watch the movie through my apple TV?
Is it possible to put the movie that i've put together in FCP onto a SDHC card and watch the movie from the card on my TV ?
Do I need to get any other software if so is it free ?
If anyone can help it would be greatly appreciated as I seem to be going round in circles!
Thanks in advance Colin

From a quick search online it appears that you need to adhere strictly to some type of AVCHD structure on the SD card in order for the TV to play it. I don't have a similar device, so obviously I can't try it, but it doesn't seem like you can easily drag a few videos to your card and expect the TV to play it :-(
Hopefully the support at Panasonic can give you a clear answer.
I suppose that you need to export for "Apple Devices", and add the movie to your iTunes library, in order for it to be accessible through the Apple TV (again, this is from my general understanding of such things, I don't have an Apple TV either):

How Do you Rotoscope In Final Cut Pro?

I was wondering how to Rotoscope in FCP?
Could someone send me a link with detailed instructions or can someone explain to me how to do it?
Any help would be great!
Thanks,
Sam

It's a painstaking process of finite and infinite amounts of work keyframing frame by frame with a garbage matte filter if you don't have other tools. Really don't do your effect doing rotoscoping with FCP, unless it can be very rough and still work for your project.
There are much better programs to do this with out there. Shake for starters. There's tracking controls coming in Motion 3 that will help here maybe... But rotoscoping isn't something you take lightly. It's really a pain to do. But has aspects of knitting I suppose... LOL...
Try using other techniques. Green screen is a ton easer on the editor if it's shot right. Couse this doesn't work for everyting I suppose. What are you trying to do?
Jerry

How do you delete a Final Cut Pro X project?

I really want to get some memory back on my computer. I erased the file of the project off my computer and even erased my trash but it saill says that it has the same amount of storage. I restarted my computer but it still didnt work. Please help!

Either, select your project, go to File, delete project render files…
Or, to get rid of the whole project, move project to trash…
Then empty the trash.
Do the same with your Events…
Otherwise, run Omni Disk Sweeper (free) to find and delete large unused files…
http://www.omnigroup.com/more

How do use the hum remover in final cut pro 5? Help

How do use the hum remover in final cut pro 5? Help!!

Simply drop the effect onto the appropriate audio track. Set the frequency for the hum frequency (50Hz or 60Hz depending on your power supply). Include whichever harmonics you think might be present eg. 100, 150, 200Hz.
Note that I have generally had more success by using Soundtrack Pro's noise removal tool.
Trevor

How to rename folder in Final Cut Pro X project library?

How to rename folder in Final Cut Pro X project library? I can't double click on folder, when I right click it just gives options to erase. Can someone help?

I think you may have misunderstood - the question is regarding renaming a project "folder", not a project name.
Still, the accepted answer here makes no sense to me at all - it's about renaming an event. So we're all confused ;-)
BTW as of 10.0.5, I still cannot rename a project folder while background tasks are running - no clue is given that this is what's going on, second-clicking on the folder just (frustratingly) does nothing. When background tasks finish, it works again.

How to import project from Final cut pro 7 to X ?

how to import project from Final Cut Pro 7 to X ?

please tell me if FCP 7can create any kind of file that FCP X can read ?
I can read FCP 7 .mov file with QuickTime, but not with FCP X ? what can I do ?
Sould I use a Premiere on PC to make files compatibles in between 2 apple Softwares ?
I have a lot a files that have been created with FCP 7 and I just buy FCP X , so I am Stuck !!!
thank you in advance

How i do Export project final cut pro to edius

how i do Export project final cut pro to edius

The other option is to get Xto7, which may be much easier than Resolve and faster.
https://itunes.apple.com/us/app/xto7-for-final-cut-pro/id487899517?mt=12
But I don't know if Edius reads XML files.
If you need EDL files, DaVinci Resolve LITE (free) is the way to go.

How using mp4 files on final cut pro x

a can't impot any mp4 (I don't want converter to mov) file in to fcp x.
how using mp4 files on final cut pro x?

MPEG-4 is delivery framework and should never be used in production. At the very leasgt you should optimize the media when you import it.

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

How do I upgrade from Final Cut Pro 4.0 to 4.5

How do I upgrade from Final Cut Pro 4.0 to 4.5?
Please Help
Leo

Hi
I got sorted apparently I had a recipt for the orignal 4.5 upgrade and this prevented the software updater looking for Final Cut Pro 4.5
solution: I opened Library and went to Receipts and found FinalCutProHD4.5.Pkg I deleted this then I went to software update and bingo problem solved?
thanks anyway
Leo

How can i uninstall the final cut pro x trial version after installing final cut pro x

How can I unintall the trial version of the final cut pro x after installing the new updated final cut pro x 10.2

I have the same issue. There are now two version of FCP X: the trial one and the purchased one. Problem is, the first hasn't been overwritten by the second, and all my projects are only visible on Final Cut Pro X Trial, and nothing on FCP X.
How and where do I get a fast answer from customer support?
Thank you

How do I transfer my Final Cut Pro X Trial work to my paid full version?

How do I transfer my Final Cut Pro X Trial work to my paid full version?
I can't seem to find a way to do this.

Kriscass wrote:
I am having issues with this, too. I currently have both the trial version and the purchased version, and I've done a lot of work in the trial that I MUST get access to, but it's not showing up in the paid version (contrary to what is stated above... that it shows up in the paid automatically). I am worried that if I delete the trial all my days of work will be trashed. It is critical that these files transfer...is it truly as simple as deleting the trial? Why was that not said anywhere in the loading directions? Feeling truly frustrated!
What version is the trial? Is that a 10.0.*?
What version is the purchased version?

How do I re download Final cut pro to another computer

how do I re download Final cut pro to another computer?

Open the Mac App Store, sign into your account (Store menu), go to the Purchases pane and download your app.
Hidden Apps -
http://support.apple.com/kb/HT4928

Final Cut Pro 4.5 and Quicktime 7 compatibility issues. Error 39!

I see some people saying Quicktime 7 is not compatible with Final Cut 4.5 and some saying it is.
I upgraded to 10.3.9 and then Quicktime 7 and I started getting error 39 at this one spot in my timeline and then crashing if I tried to play just a few seconds ahead of that spot. I tried trashing the prefs but that didn't do any good. The individual files play fine outside the timeline so it isn't corrupt media. I tried rerendering the effects that are at that point but that didn't help. I tried copying the entire timeline to a new sequence and that didn't help.
The strange thing was that when I took the part of the movie that was having trouble and deleted it from the timeline it still got error 39 when just playing over the empty timeline where the media used to be! This led me to realize that the problem lay in some Quicktime audio effects I had about a second in front ot the error 39 spot. I took off the effects from that audio but it didn't help. Then I deleted that audio from the timeline and just pasted it back in from the original clip and then it finally got to working.
Now I know nothing about the software, but I thought there might be some connection between the fact that I had effects that FCP labels as "quicktime effects" on there from my days in Quicktime 6.5, then upgraded to Q7, and perhaps those old effects don't work in Q7? I don't know.
So, my immediate problem is solved but I thought this experience may be of use to someone else. And perhaps some compatibility issues can be brought to light.

I would assume the Software Update program has sufficient logic within it to detect that my friend is running Final Cut Pro 4.0 and it would therefore be disastrous to install QuickTime 7.3, thus removing QuickTime 7.3 from her list of suggested updates. Would someone at Apple please fix this?
Sorry, but Quicktime is a component for SO MANY things, not just FCP. Sorry, but the OS doesn't detect that older versions of software are on there and won't be compatible...this is where you need to have a little knowledge. And sorry, but you need to have a little knowledge. If things are working, DO NOT UPGRADE unless it has been tested and cleared. In the case of FCP 4...it has not.
Rule of thumb...if you use older software, you have to stick to older versions of the OS and components that that software relies on.
How many things were broken with Vista? So many that the HUGE community let out a cry and now XP is available again configured on machines or as a stand alone buy. And no, Vista didn't warn that certain applications wouldn't work either.
You gotta research and find out. This place here...this forum...is a FANTASTIC place to find stuff like this out.
BTW...Apple doesn't read these forums, only us users. Gotta submit feedback here:
http://www.apple.com/feedback/finalcutpro.html
Shane

How do you remove a final cut pro 7 license and re-enter it ?

Similar Messages

Maybe you are looking for