How do you reply to support email when the email states do not reply

HHi I have a email from support and it ask me to update but the email is a no reply email how do I get my email back to support,
PPlease pass this on to your support people
Your Adobe ID:[email protected]
Your Case Number:0213131399
Case Description:Activation Issue
Hi,
I am not asking you to support it, I just want it activation so I can use it like I have been doing for years, it is not my fault you have turned off the activation software for my software, it is your fault, if you can not to activate it, you should give me free software that you can activate.
Regards Roy lamonby, Sent from my iPad
Your Adobe ID:[email protected]
Your Case Number:0213131399
Case Description:Activation Issue
Hi,
I am not asking you to support it, I just want it activation so I can use it like I have been doing for years, it is not my fault you have turned off the activation software for my software, it is your fault, if you can not to activate it, you should give me free software that you can activate.
Regards Roy lamonby, Sent from my iPad

We are not Adobe.  This is a user to user forum.  We are just users like you trying to help others.
Scroll down to "Chat now":
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivat ion-products.html#chat

Similar Messages

  • How do you reset apple ID password when the safety email address is no longer active?

    How do you resent Apple ID password when the safety email address is no longer active?

    The Best Alternatives for Security Questions and Rescue Mail
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contact Apple support.
        c. Rescue email address and how to reset Apple ID security questions.

  • HT5312 how do you reset your security questions when the rescue email address no longer exists?

    how do you reset your security questions when the rescue email address no longer exists?

    Didn't the link to contact the iTunes Store staff in the 'Additional Information' section of that article work for you? If you don't already have a valid rescue email address, only Apple itself can reset the questions.
    (90823)

  • How do you turn off an iphone when the usb to itunes is diplayed on the screen

    How do you turn off an iphone when the usb to itunes is displayed on the screen and it wouldn't shut off

    Jerry4321a wrote:
    How do you turn off an iphone when the usb to itunes is displayed on the screen and it wouldn't shut off
    You cannot...
    You need to Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414
    If necessary Place the Device into Recovery mode...
    http://support.apple.com/kb/HT1808
    Note on Recovery Mode.
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...

  • HT3597 how do you deactivate voice control so when the phone is in your pocket, you can play music without it stopping all the time??

    how do you play songs uninterupted when the phone is in your pocket?

    Tap Settings, tap General, tap Passcode Lock, tap Turn Passcode On. When that is enabled, below there is an option to toggle Voice Dial on or off (note: Music Voice Control is always enabled). Unfortunately, if you do not want Passcode Lock on, you cannot disable this feature.
    Source: http://ipod.about.com/od/phonefeatures/ss/Using-Iphone-Voice-Control.htm

  • How can I get a Quicktime update when the update states that an MSI for the previous version is missing

    How do you get a new version of Quicktime when it states that the msi for the old version is no longer available?

    Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    To install the utility, doubleclick the msicuu2.exe file you downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up").
    In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
    Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time?

  • How do I restore a previous session when the Firefox homepage does NOT have the "restore" button and it is grayed out in the menu? menu

    My Firefox homepage had a "Restore Previous Session" button but it has disappeared. SO when my Firefox crashes I lose all my tabs and tab groups, and this is very inconvenient. I have checked through all the "Options" seeing if there is some button there to enable this feature, but to no avail. I am frustrated as after a crash I spend hours revisiting all my links in my History menu to reset my tabs. Can you help?

    In case you are using "Clear history when Firefox closes":
    *do not clear the Browsing History
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
    Clearing cookies will remove all specified (selected) cookies including cookies that have an allow exception and cookies from plugins.

  • How to upgrade to aperture 3.5 when the app store does not show the update. I did buy aperture 3 on DVD not thru the app store. what to do?

    I can not open aperture databases anymore as osx10.9 keeps telling me i have opened it with a newer version, which i have not but i understand from other discussions that thru the upgrade of iphoto osx automatically thinks that you have opened with aperture 3.5. the app store does not show me the update as i have not purchased the program thru the app store but on dvd. what to do?

    If you are running MacOS X 10.9 and Aperture is installed in your Applications folder and simply called Aperture, not Apertre 3 or something, the AppStore should be showing you the update.
    Have you already updated to Aperture 3.4.5 from the Support page  Aperture 3.4.5?
    Try to update manually to 3.4.5 and then reboot and sign again into the AppStore with your AppleID and look at the Update page.
    For some forum members it helped to set the main system language to English U.S. to make the update finally show.
    Léonie

  • How do you passivate/remove a bean when the client has crashed ?

    Hi,
    I'm trying to figure out how to deal with a 'hanging' stateful bean. The problem arises when a client is killed abruptly, while the bean is in the middle of a transaction. The result is that the bean stays active in cache, and doesn't get removed or passivated. I've tried changing various timeout settings, but none of them seem to do the trick.
    Using stuckthreadmaxtime works (sometimes) in reporting the event, but I don't see how to make it do anything useful after that.
    How can I get weblogic to remove beans that have been in memory over a certain amount of time, regardless of their state of activity ? And is there some way of doing this that would call the bean's passivate/remove function so I can include a call to roll transactions back ?
    Thanks,
    Leif

    Well, I believe SFSB are pinned in the cache while they actively in a transaction.
    I believe the default tx timeout is 30 seconds. Did you increase that value?
    -- Rob
    WLS Blog http://dev2dev.bea.com/blog/rwoollen/

  • How do you back up your phone when the screen is broken and the phone is locked?

    My screen is no longer functional. I am going to take it to the apple store for a replacement byt I would like to back up my files first. When I try to do it my computer tells me I can't without the phone being unlocked. Is there anything I can do?

    Sorry. you don't. If you use the same computer you normally sync with, you would not be prompted for the passcode unless you set the passcode since the last time you synced it.

  • How can you make your Facetime work when the error message comes up saying, "The server encountered an error processing registration. Please try again later." I am using the Facetime app on my MacBook Pro 13" Inch

    Please answer my question quickly!!!

    Hey radyslav,
    There's an article that applies to your situation, I'd follow the steps within here:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/TS3970
    Take care,
    Delgadoh

  • How do you get to a component when the layout is very complex

    I am using a gridlayout right now to act as a maze. In my case, I want to draw red squares for a particular solution to a maze, and in my case it is somewhat easy since I can just multiply the row by the columns but in a situation where the components are in a GridBagLayout or some other layout that is just a mishmash. Would somebody just count sucessively even if there were 20 or so components within the layout? Or is there a better way like naming your components or something, so they can be retrieved easier. This question is just for future reference. Thanks

    All Component classes have a "name" property. However, I do not know of an easy way to find a component by name, other than manually navigating the component tree. You might want to store references to your components into a HashMap.

  • TS1367 How do you get computer to respond when the track ball halts all operation

    How do I make this rainbow track ball disappear?

    Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)

  • How do you stop photoshop from flickering when the graphics processing mode is set to basic? (Using windows 8)

    I am using Photoshop CC (2014) and I can not get the screen to stop flickering even when I set the graphics processing drawing mode to basic ( which is what other people have suggested to do). I am using windows 8.

    Update your video card driver from the GPU maker's website.

  • How do I clear an error message when the buttons available do not work?

    I have an error message that says 'cannot verify server identity' and when it asks me to continue or cancel or details, well when I push the buttons nothing happens. I cant clear the message and my iPad is virtually useless. Can someone help figure out what I'm supposed to.

    Try a reset and see if it works properly after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • On iCloud pages how can you put a header on only the first page and not the second page?

    I'm trying the do a visual report and every time I put a header on the first page it goes to the next page and if I try to delete it on the second page it deletes on the first page too.

    bump

Maybe you are looking for

  • Adobe Bridge in Photographers Package?

    I've just got the Photographers CC package with Lightroom & Photoshop. I notice on the CC contraol panel I have the option to install other apps, like Adobe Bridge - are these part of my package or do they cost extra?

  • Macbook Pro only boots in Safe Mode

    Hello, I've read a few discussions about MacBooks only booting in Safe Mode, but my circumstances are a bit different. Yesterday I installed a new piece of RAM. The installation was careful and went well. When I went to restart the computer, however,

  • Safari in v 10.5.8 keeps crashing on launch

    Hi, hoping someone may be able to help. Safari (latest v. for Leopard) keeps crashing after a few seconds of it being launched. The last thing I did was run Onyx. I have tried various things mentioned in other posts i.e. went to clear InputManagers b

  • CS6 install fails to initialize on Win 7 PC

    CS6 install fails to initialize on Win 7 PC. Have tried CS Cleaner Tool, installing from admin account, downloading Application Manager separately, and verified install media. The PDApp.log show PIM errors; Failed to load updaterInventory Library, Er

  • Multiprovider-links with infoobjects and infosets

    Hi Gurus, Advance thanks to all. Can any of tell me how can seen the multiprovider is link up with the infoobject and infosets in seen  t.code or etc,the link  with the infoobject etc will happen in backend is it correct ? waiting for your points. re