How do you reset ipad to erase all previous data entry including personal information?

I have a new Ipad 2 and it does not recognize me, how can I reset everything back to zero and re-enter my personal data?

Settings>General>Reset>Erase all content and settings

Similar Messages

  • IPhone 4s disabled. how do i fix it without erasing all my data?

    okay, i just got an iphone4s for my birthday on april 25th. i had no passcode because no one ever goes through or touches my phone. but, i got in trouble and i didnt want my parents to look through it so i added a passcode but accidentally my finger slipped and i added a random code. the finger slipped again when i went to confirm it. since i didnt know how to unlock it i put the require passcode after: to four hours. and the auto lock to never so i thought i could buy some time like that. this morning i saw i left it locked when i went to sleep last night and therefore it was locked for four hours. making it require a passcode. i had already attempted to figure it out 9x and this morning i tried once more. now says its disabled, connect to itunes. how do i unlock it without erasing all my data?

    You can't. Try restore with the computer you usually sync with.
    Forgot or Wrong Passcode
    http://support.apple.com/kb/HT1212

  • Installing iOS 5 erases all previous data

    Installation of iOS 5 erased all previous data on my iPad. Help! Prior to iCloud being in the picture, where were all my photos and documents backed up?
    I am attempting to locate the files which vanished upon updating to iOS 5 - hundreds of pdf files, thousands of uploaded photos, screen shots, saved photos from web, ALL GONE. So were all my acquired apps, although those have been replaced - now I can begin or attempt to reconstitute the complex folder structure (notes, notes 2, notes 3, etc.) which grew over the last few iOS iterations, from too many apps stuffed into folders with strict limitations on contents. Tedious, but possible. Re all the photos, I'm still looking for clues: Is solid state storage similar to that on disk drives – does deleted information still reside on the drive, just not on the index?
    Also, post updating, I am continually being prompted to authorize my computer, even though it is, and my Apple ID is intermittently rejected as if invalid, this is causing syncing challenges.
    Thanks.
    Weary of chasing side effects of upgrading operating systems.

    Same for me, when install was finished all was gone, but strange enough the disk space bar was indicating 14Go other and that was exactly my content "in app" without apps, photos, video and music. So this data was not accessible due to missing apps and all my photo/video/music was gone.
    I had exactly the same issue last upgrade, and last time I decided to resync my media content and started to add apps one by one again, and by magic almost all the apps managed to find back their data in the 14Go "other" that was still in the IPad. But I had to redo a lot of work like Icon position, some settings, and some apps didn't restore well. Took me a very long time and effort to get back to a nominal situation.
    So this time I deciced instead to click "Restore" before doing any sync and used the backup that was generated automaticly just before the upgrade to 5.0 (so still with version 4 of ths IOS)
    The process started, the Ipad rebooted and firmware was then loaded again (still 5.0) and the 14Go data from the backup was reloaded also, and this time after this quite long step, itunes started to restore apps, music, photos and videos one by one ... was quite a very long process but at the end all was perfect, storage was back to 40 Go including my 14Go data and all photos, videos and apps, with all setting perfectly restored.
    Hope this help,
    Patrick

  • How do you Reset iPad to factory defaults

    How do you reset an iPad to factory defaults?

    Go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • How do you start the computer from a previous date.

    I overloaded my desktop and now the computer is frozen. It will turn on but none of the applictions work. I can pull up preferences. I would like to start my computer with a previous date when everything is working.  Please tell me how to do that. I know how to put it in safe boot.
    Thanks,

    To return your computer to a previous date you have to have been doing backups with the Application called TimeMachine.  It is turned off, by default.   TimeMachine automatically backs-up your user files to another disk or to rounter with a backup disk.  When TimeMachine is enabled, you can return to any time or date in the past by running the TimeMachine application and doing a Restore on the date and time you choose.
    If you didn't have TimeMachine running or a current backup....
    FYI:  Microsoft's Windows has a feature to restore it's Registry to a previous date, but that is not backup of the user files.   It allows the system to replace the Registry database back to a point where it was not corrupted. 
    A similar fix for the Mac OS is to reboot the computer and hold down 4 keys to reset the PRAM (that is your system Preferences).  This is a very quick fix and it should be the first thing you try.   As the system is restarting, hold down the OPTION- COMMAND-P-R keys all that the same time.
    Failing that, you can boot the system up in SAFE mode, which brings up the Mac OS without enabling any of the extensions.   It requires a wired USB keyboard and mouse - won't work with a wireless keyboard or mouse. Cycle power and hold down COMMAND-S keys on reboot.  This will allow you basic access to your system and you can reomove or delete any application that you suspect is causing a problem.
    If none of your applications work on the Mac, you can boot up from the gray repair disk (or boot up Disk Warrior or Tech Tools).   All of them will clean up the file systems and that is usually all you need to fix things. Insert the disk. cycle the power button (hold it for 11 seconds) and hold Command Key+C (for CD) on your keyboard while it boots back up. 
    The most common cause for persistient hangs is too little memory (RAM) or the harddisk is full.   The RAM problem can be minimized by not running other big applications.   If the harddisk is over 80% full, you will see significant slowing.  At 90-95% full, the system can barely run.   Run Disk Utitliy from the APPLICATIONS / UTLILITIES Folder, as The Hatter suggested (above).  Disk Repair is the option.
    Note: If any recovery works with a wireless keyboard and mouse, I am not aware of that new functionality.   Also, any USB keyboard and mouse will work, even if it's from a PC.

  • I am giving my old laptop to my father- how do i "reset it" without erasing all of the software i have put on it.  currently he gets all of my email etc??

    I am giving my old macbook pro to my father.  i don't want to run the restore disc because of extra software i have added over the years.  I need to figure out how to "reset it" so that he gets his email- i guess to match his imac..... he currently is getting my email.  Our common goal is to somehow link our 4 computers (his imac + mac book pro) and my Imac and macbook pro for ease of sharing info and grandchild pictures (the most important part!!).  we are both technologically challenged- and we are 250 miles apart~!!  We need help!!  I am currently at his house and hope that with info from this forum- while we are together- we may be able to get this figured out.  i can access this forum and read it (since he wont be able to find his glasses) and he will be able to do the technical stuff !!!  Thanks for any assistance anyone can provide!!
    Elaine

    Hi Elaine
    You can set up a new user account for him - and delete your old account - without affecting any installed software.
    Go to System Preferences, then Accounts (called Users and Groups if you have OS X 10.7 installed).
    Use the "+" button and add a new account for your father. I'd recommend that you make it a Standard account (doesn't have administrator privileges). Make sure you (or he) writes down the user name and password that you set up.
    If you've already transferred any files you need (documents, pictures, movies, etc), you should delete your old account and set up a new, blank, admin account. First use the Accounts preferences to create a new admin user. Then log out, log in as that new user, and use the same preference window to delete your old account.
    Again log out, log in as your father's user, and set up Mail with his email details. Make sure it's correctly sending and receiving email. I strongly recommend, if he has a mail account that supports IMAP, to use the IMAP server, so that any mail he reads on one computer will be marked as read on the other computer.
    I'm not sure what plan you have to share photos? There are several online sharing sites (Picasa, etc), but iCloud - for now - doesn't have a photo sharing feature. What other info did you want to share?
    Matt

  • HT1212 how do you enable ipad 3 without losing any data?

    i have forgotten my password to my ipad 3. it now says to connect to itunes, but i have never connected it to a computer or itunes account on the computer before. i have some important information for school on there, and i really need it. does anybody know how to do this?

    you cant at all you must put it in dfu mode and restore

  • HT5467 How does my iOs6 iPad get the location services data from my personal WiFi net?

    How does Apple determine my current location of my iPad WiFi only by the location of the WiFi net (my house net)? How is the location of my private WiFi net sent to the Apple Database? Is the information obtained from the router?

    The location information comes from GPS equipped devices like iPhones seeing your router and it's MAC address and sending the router location to Apple for inclusion in their database of router locations.

  • HT4060 tried everything and can't get my ipad to charge...how do you reset it if battery is complety dead?

    tried everything and can't get my ipad to charge.  How do you reset IPad when battery is completly dead?  charger and cable works fine on IPhone.

    First make sure you are using the charger that came with your iPad and plug that into a known good wall outlet. Let your iPad remain on the charger for at least an hour. It may take that long before it responds if the battery is completely dead. If using the charger that came with your iPad there are several reasons it may fail to charge.
    Bad outlet. Make sure the Utsler has power.
    Bad charger. Try a different charger.
    Bad cable. Try a different cable.
    Dirt in the connector. Check and clean if necessary.
    Hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • HT201250 When using the installation disc to start a Mac Pro that won't start; will the 'restore from backup' option erase all the data previously stored?

    When starting a Macbook Pro that has quit by using the disc that came with it, will the "restore from backup" option erase all previous data stored on the machine?

    rsbann wrote:
    When starting a Macbook Pro that has quit by using the disc that came with it, will the "restore from backup" option erase all previous data stored on the machine?
    As long as the backup on your external drive is fine, it will restore your Mac to exactly how it was on the date of that particular backup, all data included. I have used it before and have retained all data from the date of the backup.
    Cheers
    Pete

  • How do I transfer all the information in my iTunes on my old mac book to my new mac book pro so I can sync my devices to the new machine with erasing all the data my iPhone and iPad?

    I have just bought a new mac book pro and want to use this machine as the main computer to which I will sync my iPhone and iPad.
    How do I transfer the information within iTunes on my old mac book so when I connect the devices the new machine will not erase all my data?
    Thank you

    Copy the entire iTunes folder within the music folder on your old Mac to the music folder on your new Mac.
    You can use an external hard disc for the transfer, or you can connect the computers together using Firewire Target Disc Mode as explained here:  http://support.apple.com/kb/ht1661

  • How do I erase all my data from my iPad mini?

    I purchased a new Ipad mini yesterday.  I want to return it but first would like to erase all my data entered.  The only information I found on how to do this requires that one go to settings>general>reset>erase all data.  I tried this; however, my mini has no reset option in settings>general.  Any suggestions?

    On an iPad Mini the charger port is very small, the cable should look like this:
    The larger plug goes to the charger brick.  The smaller thinner plug goes into the iPad's port, labeled Lightning Connector in the picture below. 
    iPad Manual
    http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf

  • How do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone), how do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone)

    how do you permanently delete apps from all your mac products (MacBook Pro, iPad, iPhone)

    They are not taking up storage space.  Apple knows you installed them at one time (="purchased", whether you paid money or not), and merely keeps a list so that if you wish to reinstall any of them on this or a future device, you can.  This is useful if maybe you deleted them due to space constraints, and now have a device with more memory and wish to reinstall.
    It's also useful for taking a trip down Memory Lane looking at all the useless apps you installed once then immediately deleted once you realized they were total garbage ...

  • How do you reset an ipad mini without knowing the password?

    I have just recently changed my password, but know i have forgot the new one. How do you reset the ipad without knowing the password?

    If you mean the passcode to unlock the iPad then you will need to connect it to the computer that you normally sync to and you should then be able to reset the iPad and restore/re-sync your content to it (http://support.apple.com/kb/HT1212) - you may need to put the iPad into recovery mode in order to be able to reset it : http://support.apple.com/kb/ht1808
    If you do it via a different computer then :
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.

  • TS1424 hi all how do you reset your security questions. i can not remember the answers. how do you reset them? i cant buy anything because it keeps coming up

    hi all how do you reset your security questions. i can not remember the answers. how do you reset them? i cant buy anything because it keeps coming up

    If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then go to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
    If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you won't get the reset option - you will need to contact iTunes Support or Apple to get them reset.
    e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
    or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
    When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

Maybe you are looking for

  • Mapping issue: FCC: Idoc for each record in file

    Hi, I have file to Idoc scenario. I receive csv file with multiple records. The requirement is to create an Idoc for each record. For eg. source file A1,B1,C1 A2,B2,C2 A3,B3,C3 After FCC <MT> <TRANS> <ROW> <A>A1</A> <B>B1</B> <C>C1</C> </ROW> <ROW> <

  • Installing an archiso system

    so after creating a livecd with archiso, what would be the best way to get that system installed? (in a redistributable way, not just for myself.) would I modify AIF somehow? I've been lookin' at it for a bit now, but don't really get it... xD

  • How to find which SDE/SIL to Customize ?

    I need to do a Type 1 Customization of adding a extra column from the Source System to Target DW Table in OBIA. I am able to work out everything once i know which SDE/SIL Specifically to customize, however how to find out this one ? I went through th

  • The battery of my MBA 13 "mid 2011 is lasting less than two hours after installing the Mountain Lion. Would be the OS or apps consumed much?

    My MBA is consuming the battery in less than two hours after I installed Lion Mountain. The update has already been done for some time. The problem of consumption would be the same OS, according to several complaints, or were inadequately apps consum

  • Enabling FlexConnect

    Hi, I have a situation where I have to deploy 1600 APs to a remote controller due to them not being supported by the 2100 series controllers at our local site. There are 1142s connected to the local controllers. I have the 1600s configured and they r