How do you restrict the scorm reporting to only set raw value if 100

I have an issue with the LMSSetValue cmi.core.score.raw output from a Captivate 4 course published to SCORM 1.2.
I need to customise it so that the course only sends an LMSSetValue command to the LMS if cmi.core.score.raw is '100', and not on every slide when the value is '0'
Can anyone help me with some code for the course html file?
Thanks
Dave

What the remote user can do is to implement this policy . Allow UDP protocol on port 5060 but the only source should be west.broadcore.com.
Unfortunately, Apple routers are quite simple, and do not have the features and settings that you would need to do this.
However, if you are using a modem/router or gateway device with the AirPort Express, then you might be able to set up the modem/router to do what you need. What is the make and model number of the device that you likely call your "modem"?

Similar Messages

  • HOW DO YOU CHANGE THE RESOLUTION TO A HIGHER SETTING

    How do you change the resolution to a higher setting with a macbook pro?

    hey
    this is nice post acctually i was looking for the same..
    thanks for sharing...

  • How do you restrict the number of table columns on the data tab?

    I have a table with 50+ columns. Is it possible to restrict the list of columns on the data tab to say 5 columns as I'm only interested in seeing/updateing the data for these 5 columns. You can restrict the number of rows using the filter but not the columns. Is there some other way seeing an updateable "view" of the table? I suppose you could create a number of views and edit through them but there are too many combinations.
    regards
    Paul P

    I don't know of any way of reducing the number of columns that display in the Table data grid.
    However, you can rearrange the columns to have the five columns you want to edit as the first five. With fifty columns, even this would be some effort to find and drag them to the left of the view, but it should give you the five columns you want to update on the window at the same time.

  • How do you restrict web browsing to view only specified sites for business use?

    Hello, I need to restrict the use of Firefox and Internet Explorer to only specified websites that we use for business use.
    I have a problem with a number of employees using unauthorized and dangerous websites that have put my business computers at risk.
    Since it is impossible to police the employees viewing habits in real time, I need to restrict the viewing. How do I set up a list of only allowed sites that can only be overridden by admin privileges despite user accounts?

    You will have to block such unwanted sites in a firewall or router or proxy and only allow access via that proxy.<br />
    All other ways can easily circumvented, by starting Firefox in [[Safe mode]] if it is an extension or by using a portable Firefox version.
    Your above posted system details show outdated plugin(s) with known security and stability risks.
    # Shockwave Flash 10.0 r45
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • How do you change the a report datasource using B.O. XI release 2??

    Post Author: odgsmit
    CA Forum: Data Connectivity and SQL
    Is it possible to change the datasource associated with a report via web services consumer api's?  I have a report that has a default database(a), however, we would like to, at runtime, have the report to query a different database(b).  At the present time, trying to access the report while supplying it the new datasource information does not work with either the java nor the .net consumer api's.
    Does anyone know if this can be done?   If so, please provide the details of your success, so that I can try replicate the same procedure.
    I am using B.O. XI release 2.
    Thanks.

    I've got a similar problem:
    I'm attempting to follow the directions in the Upgrading and Migrating Guide for Leopard. The Mac has two hard drives in it. Batman contains the active server running 10.4.11. Magic is the hard drive that will run 10.5.2.
    Since I'm moving from one hard disk to another (as opposed to an entirely different Mac), things ought to be fairly easy. But not for me. ;(
    What I'm trying to do: Migrate the mail database. (I have managed to import users and groups; only the mail service will run on this machine.)
    Problem: I can't change the owner and group settings on the various files in the var/imap and var/spool/imap folders (for example, so that they are owned by system or _cyrus, with group wheel or mail and everyone set to read only).
    The owner and/or group often shows up as unknown (which is to be expected with the migration to a different hard drive). But how can I change these permissions?
    Or is there a way to use a command to copy them from one disk to another? I tried ditto, but didn't get the syntax right (the files were copied to the same level as the imap folder rather than within it) and now I have a bunch of files owned by nobody that I can't delete because I can't change the owner.
    TIA,
    mm

  • How do you fix the date (day number only) in menu bar to match correct Date and Time Preferences?

    My date and time preferences all show up as correct and I get "Sun 10:54 AM" in the menu bar (correct), but when I click that to quickly get the day's date, I get "Sunday, August 5, 2011".  The '5' is the only thing that is wrong, and it has remained '5' for the last 3 days, even thought the Date & Time Preferences are correct.  Is there any easy fix for this?  I don't know if August will change to September, but the day of the week has kept up with time!

    I know how to get the full date and time, etc. to show up on the menu bar (and it shows up correctly), so it's just a little 'glitchy' thing that when you click on the date/time in the menu bar, the greyed date remains on the '5th' of August - sort of like that Groundhog Day movie!

  • HT204053 How do you change the apple ID that is set for iCloud?

    My iCloud is set up to my families email instead of mine. It's asking for their password. Can I change the account to be my apple id?

    settings / icloud - delete the account your currently see, then re-add the one you want

  • How do you reinstall the Time Machine application only

    I'm wondering if anyone can help, I'm having ongoing issues with my Time Machine stalling at the 3 to 5 GB mark and causing my computer to freeze. I've been dealing with this for months and have been searching through Discussion Forums and the buddy widget without help. I've spent over 4 hours on the phone with Apple Care over the last week, and no one has answers to why this would be happening.
    In one last effort, an Apple employee mentioned reinstalling TM by itself. I have the disk but can not see an easy way of doing this. Am I missing something quite straight forward?
    Thanks

    ConradV wrote:
    I have the disk but can not see an easy way of doing this. Am I missing something quite straight forward?
    click here for instructions.
    JGG

  • Can you access the internet using wifi only on an iPhone 4?

    How can you access the internet using WiFi only (no service) on an iPhone 4?

    Assuming your connected to wifi - go to safari.

  • Crrystal Reports using ADO.  How do you Change the Isolation Level?

    Post Author: jmetaxas
    CA Forum: Data Connectivity and SQL
    Crrystal Reports using ADO.  How do you Change the Isolation Level?  I found a knowledge base article that allows you to change it for ODBC.   But nothing on ADO.  I kicked around changing the reports to ODBC but even then the keys described in the article do no exist.  Any suggestions?
    Thanks,
    John Metaxas

    T-Bob wrote:
    I want to make sure that points 2&3 are at the same level, so I can just move the envelope region between them up and down to change the volume. Any quick way to do this to speed up my process?
    Specifically to address this point: if you mouse over the audio levels' rubber band segment BETWEEN your points 2) and 3) until the cursor changes to an up/down adjustment arrow ⬍, and move it up/down, it will adjust BOTH the levels at 2) and 3), maintaining the relative difference between them (or, if points 2) and 3) start at the same level, this adjustment will keep them equal as you drag them both up/down together in one action.)
    As usual, much easier to DO it, rather than describe it!

  • How do you elimanate the restriction Passcode on a IPhone 4 as I forgot the password?

    How do you eliminate the "Restriction Passcode" on a IPhone 4 as I forgot the password?
    I have done a backup and I have done a Restore and I still have the Restriction Passcode On.
    My main objective is to wipe out this phone to manufactures specifications.

    I had the same problem with my iPhone 5C. After trying several YouTube solutions involving CopyBot, which did not work, I finally figured out how to get rid of the restrictions passcode.
    1. Back up your phone to icloud. You will want to be sure you have synced your phone to your laptop as well to access your contacts and photos again.
    2. Make sure you have "Find my Phone" activated on your phone.
    3. On a laptop or other device, go to www.icloud.com/#find.
    4. Login and after the site finds your phone's location, click on the "All Devices" arrow and select your phone.
    5. Select Erase iphone. You will see it erasing on your phone. Don't panic!
    6. When your phone restarts, it will take you through the setup process. YOU WANT TO SET IT UP AS A NEW PHONE! If you restore a backup you will still have the passcode in play.
    7. During the set up, your phone should automatically restore your contacts; however, you may need to upload your photos and music manually.
    8. The restrictions passcode will no longer be on your phone! You will need to download your purchased apps again. This is a bummer, but at least you got past the restrictions passcode.
    I know this worked for the 5c, I can only assume it will work for all versions of the iphone, but I am not an expert.

  • How can I restrict the total no. of recs. per physical page

    Hi !
    I have created a report and I am saving that in a text file. The
    problem is that when I try to take the output on the printer
    then the total no of records overflows to the next pages and the
    next page heading comes much below to it's designated place.
    Max.no of records property in the repaeting frame is for the
    logical page.
    How can I restrict the max. number of records per physical page ?
    Any pointer will be welcome,
    Thanks in advance,
    Shobhit
    null

    Just for fun (and in case this wasn't done to death in the other thread), the rule posted here states:
    Most years have 365 days, but a leap year has 366 days. That adds up to 52 weeks (where each week is exactly 7 days) PLUS 1 or 2 additional days. The year 2012 has exactly 366 days.Now if the year starts on a Sunday in a non-leap year, you end up with 53 Sundays. Or if either of the first two days lands on a Sunday during a leap year, then you can also get 53 Sundays.>
    which allows a calculation like this:
    with test_data as
         ( select rownum + 1999 as test_year from dual
           connect by rownum <= 15 )
    select test_year
         , case
              when first_day = 'SUN'
              or ( first_day = 'SAT' and leap_year = 'Y' )
                 then 53
              else 52
           end as sundays
    from   ( select test_year
                  , to_char(to_date(d.test_year||'-01-01','YYYY-MM-DD'),'DY', 'NLS_DATE_LANGUAGE=ENGLISH') first_day
                  , case extract(day from last_day(to_date(d.test_year||'-02','YYYY-MM'))) when 29 then 'Y' else 'N' end as leap_year
             from   test_data d );
    TEST_YEAR    SUNDAYS
          2000         53
          2001         52
          2002         52
          2003         52
          2004         52
          2005         52
          2006         53
          2007         52
          2008         52
          2009         52
          2010         52
          2011         52
          2012         53
          2013         52
          2014         52
    15 rows selected.

  • How can we restrict the objects..?

    Hi it was a question asked in an interview.
    How can we restrict the object..?
    is it with RSSM and PFCG settings..?
    Correct me if I am wrong..!
    Cheers,
    Vasu

    hi Vasu,
    if the question is restriction in reporting by authorization, then you are right. take a look some bw authorization docs
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1b439590-0201-0010-ea8e-cba686f21f06
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a6329790-0201-0010-b4a1-fdd384045fdb
    hope this helps.

  • How can i restrict the Expenditure Type values at a specific OU ?

    Dear Guys,
    I would like to ask about the Expenditure Types,
    I have implemented two projects for different Operating Units ,
    when navigating to any Projects responsibilty,and navigating the Expenditure Type field
    the values exist are all the values implemented across the OU not the values entered at this OU
    How can i restrict the Expenditure Type values at a specific OU
    Regards
    Amr Hussien

    Hello
    When you set up a project there is an option called Transaction Control.
    This option allow you to list the allowed or restricted elements of costs for the project.
    You may enter the transaction control on a project template and that will be copied to any new project.
    The cost elements may be expenditure types, expenditures categories, suppliers, employees, etc.
    In your case, I suggest to set up specific project templates for each operating units. On each template enter the list of allowed expenditures types for that OU.
    Doing so, the system restricts users from entering any expenditure item, supplier invoice, purchase cost etc, against an expenditure type, which is not allowed.
    Dina

  • How can i restrict the qty/value at the time of invoice

    Hi,
    Can you plesae tell me at the time of MIRO how can i restrict the user not to enter the qty more than in MIGO & PO
    Thanx

    You cannot restrict the qty in MIRO. because it is used for partial invoice receipt.
    E.g  in some cases 100 nos of qty might have received in one GR. But the supplier may give 3 invoices for this. that is the reason u cant restict this
    reward if useful
    SK

Maybe you are looking for