How do you route sequencer material to different ports in Audition 3?

"Durin" from Adobe wrote:-
"This first implementation is limited to one global MIDI port. Each channel is broadcast on all ports enabled in the hardware preference manager. This was not our preferred behavior, and is one we intend to address in the next release.
The short explanation comes down to time and choosing which features were prioritized over others. As our goal with this release was not to create a full-featured MIDI editor but a VSTi-based sequencer with basic MIDI support for controllers and keyboards, some of the more advanced features MIDI offers had to be deferred in favor of ensuring our VSTi support was solid and robust.
I've already written up feature designs to implement multiple ports, sophisticated hardware routing and assignments, and full SYSEX and Patch support, and it's my hope that our next release can continue to beef this sequencer up and make it as valuable as the rest of the application. If you have suggestions or a wishlist of features you'd like to see, please share them either in the forums or privately to [email protected] "

Hi Kevin
Not sure about the Source selected VRF feature, But still you can try if it work then ok or else you can go with the below solution for traffic coming from data center to VRF.
You need to add two routes.
@ You need to add static router fro VRF network to Data center network
i.e. ip route vrf (voice- VRF ) 0.0.0.0 0.0.0.0 (Gateway) global
@ You need to add static route for VRF network in the global routing table pointing to the interface connected to VRF.
i.e ip route (VRF network ) (VRF subnet mask ) (Gateway Address that’s connect all VRF)
So when traffic is coming from Data Center till will be pointed towards the interface were all VRF is connected & they will communicate & when reverse traffic will come from VRF they will reach to Data Center router & use VRF global route to reach data Center network.
(You can refer the configuration of PE-2 of document that shared earlier)
Regards
Chetan Kumar

Similar Messages

How do you safely remove hardware from USB port, How do you safely remove hardware from USB port

How do you remove hardware safely from usb ports? i cannot see any icons located on my screen

What kind of hardware?
Only drives need to be "safely" removed in Mac OS X. If they are not on your desktop open a Finder window and they will be in the right hand column

How do you re-authorize your computer - different Adobe ID?

I need to re-authorize.
I have a nook. I set up an Adobe ID, then downloaded ADE and set it up with my adobe ID.
I go to google's e bookstore, download free books, transfer to nook, no prob.
THEN I BUY a book from google's e-bookstore and it will not transfer to nook.
The only thing I can figure is that my google account is set up under a different email address so I go back to adobe, change my ID, uninstall ADE / restart computer / install ADE again, and it still says my computer is authorized to the old ID.
How do you change this?

You can de-authorize your computer by opening Adobe Digital Editions and pressing crtrl-shift-d. You should then be able to re-authorize with your new ID.
One other thing to try is to de-authorize your Nook first (open ADE, press ctrl-shift-e), deauthorize the computer, then reauthorize the computer, then reauthorize the Nook. I have gotten some feedback from some friends that when they authorized their device before they authorized their computer that they sometimes had problems, so make sure you re-authorize your computer first.

How do you combine two or more different toolbars?

There is wasted space on multiple toolbars that could be utilized better by moving one tool bar's items up to the empty space above. IE Norton's tool bar has 3 / 4 items on it. The Firefox tool bar above has 3 items on it: Most Visited, Getting Started and Firefox Updated with 2/3's of the bar as empty space.
Even the menu toolbar has over half of the toolbar as empty wasted space.
How do you do that? Thanks

You can (temporarily) hide unneeded toolbars via "View > Toolbars"
The bar with Most Visited and Getting Started is the Bookmarks Toolbar and if you open "View > Toolbars > Customize" then you can drag the "Bookmarks Toolbar items" item onto another toolbar (e.g. Menu bar) and hide that now empty Bookmarks toolbar.<br />
Toolbars added by an extension can only be merged onto another toolbar if that extension supports that feature and most extensions do not.

How can you make one button preform different actions in Xcode?

How can you make one button "preform a click" and "orderfront"? Is that possible? Because what I am doing is making a welcome window to my application for Mac OS X 10.6, and I have two buttons in that window, one says "Connect" which connects a a WebView to a url and the other button opens up the main window. So how can I a make a button do multiple things at once??

Ah - If you are just using bindings between various objects from Interface Builder, you can reduce your application code a bit (sometimes quite a bit), but there is only so far you can go. Typically variables and routines are defined in your application that Interface Builder hooks into, so that your application code (usually Objective-C, but can be others) can use these variables and routines to determine what is happening in the user interface.
I'm not sure how up-to-date the project code is (or what programming code you are familiar with), but you can take a look at Apple's Cocoa Application Tutorial to see what is (usually) involved in creating an application.

Route IDocs dynamically to different ports

Hello,
Is there a way to dynamically (at runtime) bypass the port defined in the partner profile and route the IDoc (invoice) to a different port? We have two physical EDI servers connected via tRFC to the same SAP host and need to route outbound IDocs to different EDI physical servers based on the sales organization ID that created the invoice.
Thanks in advance for your assistance.
Danny

look for the updated firmware of the SPA8000, this one has the option for trunks
you can register the one account there and assigne routing information to particular lines on the SPA8000.

How do you route the line-in audio to line-out on Mac Pro (10.6.8)?

New to Mac. Seems like it should be a straight forward deal, but it's not obvious how to make this happen. I can tell the audio is coming in, as the input levels are reflected under System Pref's. But I can't hear the audio on the line-out speakers and there doesn't seem to be an option to explicity route the audio. Probablly missing something simple. Any help would be appreciated.

You can do this without buying or using 3rd party s/w. Use GarageBand this way:
1. New, Empty Project
2. On the next screen, choose:
     a. Audio, Line In
     b. Input 1+2
     c. Check the "I want to hear my instrument as I play and record" option
     d. "My instrument is connected with:" - Built-in Input
     e. "I hear sound from;" - Built-in Output
     f. Click "Create"
3. You should immediately hear sound; you don't have to record anything.
4. If you don't see green bars on both the Audio 1 track and the master volume (top right), something is either wrong with your input or the steps didn't work for you. To redo the steps, choose "Track, Delete Track" from the menu and try again.
IMPORTANT: Make sure that all of the needed volume controls are up high enough to hear something:
1. Audio 1 volume and Master Volume sliders in GarageBand
2. Volume slider on Apple main menu, speaker icon not muted
3. Volume on input device (e.g. iPhone)
See how you go
P.S. I do it on a mac mini but it shouldn't be any different
Message was edited by: SilverSkyRat

How do you make a SpryMenuBar a different color for each page?

Hey everyone. I'm new to web design and dreamweaver is definitly kicking my butt. Anyway, I'm trying to create a simple website for a foundation and I want to make each page have a different color Sprymenubar to match the color theme of the different pages. The site will only have about 6 color themes max so this shouldn't be a huge undertaking. The trouble I'm having is I have created the home page (the color green) and right now I'm working on the second page (the color blue). When I added a new sprymenubar and changed the CSS Rule to make the color of the menu blue and the hover color light blue it then changes the color of the menu on the home page from Green to Blue. How annoying! I even tried starting from scratch and inserting another horizontal sprymenubar but I can't seem to make another horizontal sprymenubar with a whole new set of rules independent from the first one. What can I do? Do I have to make an editable region or am I just not clicking a certain button to make the new menubar independent from the first one?
Examples
First this
Then this
And then this happens
Let me know!!

Ok I found a similar question on this forum that was answered and helped. If anyone comes across this wondering the same thing, copy and paste your SpryMenuBarHorizontal.css file and rename the copy to something like "(Title_Of_Page)SpryMenuBarHorizontal.css" and then replace "SpryMenuBarHorizontal.css" in your code to <link href="../SpryAssets/(Title_Of_Page)SpryMenuBarHorizontal.css" and then you are good to go.

How do you restore image for a different target?

I have an on-click swap image, which I do not restore, as I want it to be clear which element has been selected if the user moves their pointer away. However, if the user clicks a different element, I then want to restore the image in the first. How do I achieve this? There are 8 separate clickable elements, and it isn't a nav bar.

I took a few minutes and came up with a rough example of the coding using three images (actually 6):
http://www.nedwebs.com/DW/imageswap.html
If you right click the page you can select the option to view the source code.
What I mainly did was revise the link tags to use onmouseup as the indicator of a click being completed on an image, which triggers the MM_swapImage() function that DW creates when you use their built-in image rollover offering. I eliminated the MM_swapImgRestore() function and call to it that DW normally also creates. The swapImage function stays the same except for the addition of one line to call the function I added. The function I added, NM_restoreAllImages(), while it could be refined (becoming cryptic to try to read), serves to return all images back to their original ones.

How do you connect sequences so that they are smooth

when connecting sequences how do we make it a smooth transition from one sequence to the next??

I will try and guess what you are asking about!
You can make a cut just as if cutting to another clip. An editor woul ddetermin ethat the last frame of one sequence will cut nicely / smoothly to the next frame of the next sequence.
But it is likely you are asking about using a transition. between two sequences?
Cut enough off the head and tail of each sequence so as you have handles to cover the transition duration. Allow for this in editing the sequences.

Javamail - How do you access mail from a different Google domain

I'm trying to accessing mail from a different Google Domain (custom google apps domain i.e. email(at)labs.com
Currently the application is accessing the mail from Gmail and sending it to same mail id
Does anyone know how to change this?

I don't actually know, but I would guess that either there's a mail server running at imap.labs.com,
or else you just login to imap.gmail.com using your labs.com email address.

How do you change sequence settings in Premiere CC

I bought me a new external disk and I copied the project over to my new disk.
But how do I change the sequence settings to my new disk?

I see it now that it can be misunderstood a bit. What I mean is that I wan´t to change the render workflow that you choose when you start a new project.

How do you lookup multiple values in different columns based on variable criteria?

Essentially, I'd like to be able to do a Vlookup but instead of searching for one value only, search for multiple values in separate columns. A smaller version of my current spreadsheet as an example...
Attack Type ->
Fire
Water
Grass
Fire
1/2x
2x
1/2x
Water
1/2x
1/2x
2x
Grass
2x
1/2x
1/2x
Fire/Water
1/4x
1x
1x
Fire/Grass
1x
1x
1/4x
Grass/Water
1x
1/4x
1x
The headers are the attack types and the list of types to the left are the receiving Pokemon. Fire does half damage (1/2x) to fire types, Water does double damage (2x) to fire types, etc. I'd like to be able to search for specific damages for each type. For example, I'd like to find a Typing that recieves half (1/2x) damage from Fire-type attacks but also recieves double (2x) from Grass-type attacks. I do want more than just two search criteria though seeing as the actual table is much, much larger.
I've tried assigning number values to each damage multiplier and then merging all of them together for a specific typing and doing a VLOOKUP based on checkboxes determining what damage multiplier I want in a few specific types, the rest being filled in to the standard of 1x but the result isn't correct most of the time.

Hi Mitchell,
VLOOKUP can be set for accept either an 'exact match' or a 'close match'. Your 17 digit 'number' is actually a 17 character text string (Numbers can handle numbers to a precision of only 15 places). Provided all 17 digits are present, sorting should be the same as for numerical values—the leftmost character is the most significant.
As a text string, your 'number' is sorted/evaluated alphabetically. A 'close match' accepts the 'largest value that is less than or equal to the search value'.
If your search term is 000200000 (a 9 character string), several 'wrong' answers will fit the 'close match' criteria, including all of those listed below:
000200000 (the 'correct' match)
0000xxxxx (x may be any of the three acceptable values)
0001xxxxx (x may be any of the three acceptable values)
The main problem here is that digits in a number (or characters in a text string) have decreasing significance related to their distance from the beginning of the string/number. You want a search in which each character has the same significance as each of the others when compared to the search key. To do that, you need to compare each character in the search string with the character in the same position in the similar string for each type of Pokemon, then take a count of the matches or a sum of the differences.
Here's one approach:
Column A contains labels.
Column B, the 17 digit search term, created in whatever manner you wish, and the similar 17 digit string for each of the characters.
Columns C through S contains a formula that detines, using subtraction, the difference between each digit of the search term and the corresponding digit of each character's profile.
Column C uses SUM() to calculate the total of columns C to S for each row.
T1 uses =MIN(T) to calculate "least different" profile.
Column A is a Header column; Row 1 is a Header row.
Formulas:
C2, and filled right to S2, then down to the last row of data:
=ABS(MID($B$1,COLUMN()-2,1)-MID($B2,COLUMN()-2,1))
T1: =MIN(T)
T2, and filled down column T: =SUM(C2:S2)
The conditional formatting rule set for all body cells in column T is shown below the table.
This may be enough to get you started. Formulas can be tweaked to produce results more closely matching what you're looking for, if necessary.
Regards,
Barry

How do you join two tables from different Oracle schemas using a subquery

I am trying to join two tables from different Oracle schemas using a subquery. I can extract data from each of the tables without a problem. However, when I combine the select statements using a subquery I get the Oracle error *'ORA-00936: missing expression'*. Since each SELECT statement executes on its own without error I don't understand what is missing. The result set I am trying to get is to match up the LINE_ID from PDTABLE_12_1 in schema DD_12809 with the MAT_DESCRIPTION from table PDTABLE_201 in schema RA_12809.
The query is as follows:
sql = "SELECT [DD_12809].[PDTABLE_12_1].LINE_ID FROM [DD_12809].[PDTABLE_12_1] JOIN " _
+ "(SELECT [RA_12809].[PDTABLE_201].MAT_DESCRIPTION " _
+ "FROM [RA_12809].[PDTABLE_201]) AS FAB " _
+ "ON [DD_12809].[PDTABLE_12_1].PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS"
The format of the query is copied from a SQL programming manual.
I also tried executing the query using a straight JOIN on the two tables but got the same results. Any insight would be helpful. Thanks!
Edited by: user11338343 on Oct 19, 2009 6:55 AM

I believe you are receiving the error because you are trying to JOIN on a column that doesn't exist. For example you are trying to join on FAB.PIPING_MATER_CLASS but that column does not exist in the subquery.
If you want to do a straight join without a subquery you could do the following
SELECT DD_12809.PDTABLE_12_1.LINE_ID
,       FAB.MAT_DESCRIPTION
FROM    DD_12809.PDTABLE_12_1
JOIN    RA_12809.PDTABLE_201    AS FAB ON DD_12809.PDTABLE_12_1.PIPING_MATER_CLASS = FAB.PIPING_MATER_CLASS HTH!

How would you setup users to have different versions of Flash Player?

I am looking to test some setups with different versions of Flash, but wanted to know how to setup one user to have Flash Player Version 6, one with version 7, 8, etc.
How would I go about doing this?
Thanks,
Russ

Create a new folder named Internet Plug-Ins inside the Library folder of the home folder of some of your user accounts, and move the different versions of the plugin into this folder, one per user account. The copy of the Flash plugin in the main Library folder is accessed when an account doesn't have a copy in its home folder.
(13732)

How do you route sequencer material to different ports in Audition 3?

Similar Messages

Maybe you are looking for