How do you run Multiple Files on a single screen?

Greetings; Please only respond if you've ACTUALLY done this, no opinions requested.
I'd like to run several /.mov/mp4 files simultaneously on a single screen to simulate a 360deg view.
If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed thumbnails/2"X2" format. For example; Top, Bottom, Left, Right, Center images...
How can this be done in Premier...?...and then exported to a standard format...?
Again; Please only respond if you have ACTUALLY done this; no opinions please...
Thank YOU

If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed
When I did this type of shot before I had to do some tricky stuff....and the hardest part for me was keeping me from shooting the other cameras and those other camera operators, not to mention trying not to see all those reflections of cameras and everything in the car, especially when I flew over the roof on wire ! Eventually I got it done but I had to basiscally use space lights with skirts and diffusion and then tent the car off with silk ( this was in a large football field sized stage )...and then put little holes in the silk for the "lenses"...and then hire a lot of people to walk that silk around as the cameras all dollied on track with the movement of the silk... took forever to get the shot but it was beautiful if you squinted.
good luck !
ps...I when I edited this just like you want to do, with a lot of simutaneous screens within the frame, it looked so 3 dimensional people actually lost their balance watching it !

Similar Messages

How do you select multiple files to drag

How do you select multiple files to drag from one folder to another? Is there a command?

Open the folder which has the contents you want to transfer. Press COMMAND 'A' and then all of the data should be highlited in blue. Drag it to the new folder.
If only certain files are to be transferred, then you have to select them (COMMAND 'A') individually and the drag them as a group to the new location.
Ciao.

How do you select multiple files at one time

How do you select multiple files at one time

Select one, and then either command-click another, or in list/column view, Shift-click the item at the other end of the range you want to select. Alternatively, click on a spot in the screen and drag the cursor until all the files are selected.
(114308)

How do you rename multiple files at the same time

how do you rename multiple photo files with a name at the same time?

This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
http://www.youtube.com/watch?v=Ie6zGxo2D-o
If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

How do you select multiple files on a macbook pro?

Can anyone tell me how to select multiple files at one time? I am so frustrated with the way macbook pro works that I really regret buying it. I hate that you can't select multiple files, and that my contact stuff keeps changing. It is certainly not like I was told...that I would never want to use a PC again. I would not buy another apple computer. I spent a lot of money to NOT be able to do things that I have always done with ease. Every time I think I have something figured out, it doesn't work the next time I go to use it in another program. If anyone has an answer to this, I would sure appreciate it.
And all of these so called wonderful updates to the operating system on all mac products have left me frustrated and liking my apple products far less than I did before. On my iphone I had to make the texts just huge to even be able to see the white writing on a blue background. Not sure who made these designs, but from my perspective, I can tell you they certainly weren't thinking about being user friendly in any way when they did it. So disappointed in all of my devices! I do not enjoy using my computer, ipad, or iphone even close to what I did before.

This is some information on the Finder.
http://support.apple.com/kb/ht2470
To select multiple files you can use the shift key with the mouse if they are in a contiguous list or the CMD key with the mouse if you have breaks in that list. You can also use the mouse to drag over the files you want to select.
The Macs are easy to use, I have used many versions of Windows, Linux and other operating systems and I find OS X is far the easiest, but that is me.
There are many instructional videos and texts on Apples web site and if you are near to an Apple store they do classes to help.
Hope you get used to it.

How do you run .exe files with wine by clicking on them?

Hi, I need help with using wine on mac osx. I used to use wine on Ubuntu and Linux Mint and it was relatively simple. But on mac osx, I used macports to dowload/install wine, and i used winecfg to create a prefix. I can not figure out for the life of me how to launch an executable by clicking on it. It opens in TextEdit instead of launching in wine. Can someone explain to me how to make a .exe file launch by clicking on it? Do i have to register the filetype with wine? Wine is not in a .app format. I can run any .exe in terminal but it is less than convenient. Thanks in advance.

So wrap Wine in an application, and bind the .exe's to the wrapper application.
Platypus (free download)
<http://www.versiontracker.com/dyn/moreinfo/macosx/19870>
Can be used to turn any Unix program or script into a double clickable application, as well as a drag and drop target application.
It should be possible to wrap Wine with Platypus.
As an alternative, you might try Applications -> Automator -> Run Shell Script workflow, and save that as an application. Then bind your .exe's to that workflow you created.
NOTE: I have not played with Wine, so your mileage may vary.

How do you upload multiple files?

Hi,
This is propably an easy one.
I am trying to upload multiple .gif files to a folder in KM.
I went to Content Management -> KM Content and created a new folder inside a sub-folder.
Now when I click on the contect menu I select New.. and then Upload...
However, this only allows me to select for upload one file at a time.
I neeed to upload about 50 files. It will take ages doing this one by one!
Is there a quicker way?

Hi
Multiple upload of files is possible by using WEBDAV protocol.To use this follow the below steps.
Go to folder to which u want to upload the files and the click on the context menu and select details.A new window will open up.In that select settings->properties->accesslinks.copy the WEBDAV link shown there.
Now
click My Network Places on your desktop, and choose Tools from the top menu bar/Map Network Drive from the context menu. If you donu2019t find My Network Places on your desktop you can find it under Windows Start menu option on your computer.
select Sign up for online storage or connect to a network server. Click next
Highlight Choose another network locations. Click next
Use Cntrl+V to paste the URL path name(webdav URL). Click next
Change the URL location to the name of the folder in KM. Hit next. Hit finish
A folder by the name you just created will appear under my network places on your explorer application.
Using this u can upload multiple files directly into folder u want.
Hope this solves ur problem.
Regards
Hussain.

How do you update multiple files in P6?

I have 4 project schedule files to update, all of them are part of the same project. Each file is one area of the project. There are relationships within each file, but there are also relationships among the files. So, if for example you update an activity and press F9, it may affect an activity that is on another file. What is the the best approach to update a project schedule like this in P6? Do you open each file, update it and then press F9? or, do you open all of the files, update and then press F9 with all the files open? Thanks.

I have 4 project schedule files to update, all of them are part of the same project. Each file is one area of the project. There are relationships within each file, but there are also relationships among the files. So, if for example you update an activity and press F9, it may affect an activity that is on another file. What is the the best approach to update a project schedule like this in P6? Do you open each file, update it and then press F9? or, do you open all of the files, update and then press F9 with all the files open? Thanks.

How do you open multiple web pages on same screen macbook air

I wish to refer to multiple pages to check info on each page and copy how do you do this in safari

To create a new tab in Safari, use command+t
You can drag the tab out of Safari to make a stand alone webpage.

How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

I installed a samsung 840 pro SSD to my primary slot and relocated my 1.5 TB HDD to a data double where my optical drive was. I transfered my apps and Mac OS X to my SSD for fast boots and all my itunes movies, music, Iphoto etc to my HDD. I rebooted off my SSD then seen all the data on my HHD itunes movies, music, iphotos etc i cannot view on my SSD. So my question is how do you view all the content on both the ssd and hdd on the same screen with having to boot off one or the other?

No, what I'm saying is that once you boot into OSX, you should be able to see both drives listed. If you don't then either OSX is hiding the other drive because it sees it as a boot drive and is trying to protect the contents from novice users or there's another problem. If it's the first thing (i.e. it's a protection thing), then your only option would be to boot into the old drive, copy off all your personal data to an external backup drive, then reboot into the SSD and go into Disk Utilities and wipe/reformat the second drive so that you can see it as a regular secondary drive. Then when you see it as that, you can copy your data back to it.
Be carefull poking around in Disk Utility as you can easily lose your data. It's possible the Mac just isn't mounting that second drive because it sees it as another boot drive. Whatever you do, don't accidentally erase it without getting a copy of your data off of it because you obviously don't have that on your SSD now.

How do you print multiple copies of a single photo on one page in iPhoto 9.5?

Help. Duplicating the photo as many times as I need it and then selecting them to print works, but in the last version of iPhoto you could explicitly choose to do just this. How do you do it now??

That feature has been removed from the latest version of iPhoto. Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html.
OT

How do you add multiple files to template?

I want to add several files to the CREATE DVD template batch. I don't understand how you go about doing this. It seems to only allow one.

Try it in reverse; just drag all of your files into the Compressor batch window; select all of them, and then drag the template you want over them.

How do you compare multiple files in Linux

I have these two folders on a linux server they have similar file structure... I am windows user so I wanted to find out what would be a command to do a diff on all the files withing these two folders on the linux server... is that possible...

I really need to see an example of this to be sure we are talking about the same behavior.
When diff(1) compares two directories, the files within them must have the same name, and be character-by-character the same. Even if one file has an extra space, that change will show as a difference.
Diff(1) can output its findings in several formats. For example, using the "-u" switch (as we have) some lines on either side of the change are printed to help you see exactly where the changed lines are. This is called the "context" of the changes. You can try leaving off the "-u" switch like this:
$ diff -r dirA dirB
to get a different output style. The diff(1) program has many command line options so you can probably experiment and find some that do what you want. Maybe you want to ignore changes in the spaces around individual words: there is a switch for that and many more.
Hope this helps.

After the download of the 2 CS5 Photoshop files, how do you run the files?

I've downloaded the 2 CS5 photoshop files to the same folder. The program did not automatically open.

Cust44 what CS5 files specifically are you referring too? Also which operating system are you using?

How do you assign multiple values to a single element in an array?

I'm probably not wording the question right.
I have an array, let's call it M[], and for each element in the array (we'll say M[1]), I need assign three integers: row, col and value.
I need to set it up so I can do something like this:
A.row = M[i].col;
A[i].col = M[i].row;
A[i].value = M[i].value;
The algorithm isn't what I need help with, it's assigning .col, .row and .value to an index of an array.
Please help if you can.

You are right. You did not word your question perfectly, but I still think I get what you want.
First of all: A single element in an array always has exactly one value. No more, no less.
But that's not a problem. The element in an array is either of a primitive type (boolean, byte, char, short, int, long, float, double) or it's a reference (to a Object, String, MyClass, ...).
You can simply write a class that holds your three values and create an array of that type:
public class SomeData {
public int row;
public int col;
public int value;
// somewhere else:
SomeData[] a = new SomeData[10];
a[0] = new SomeData();
a[0].row = 10;
a[0].col = 5;
a[0].value = 42;Note how you only assign a single value to the element (a[0]) itself. All other assignment actually go to fields of the object refered to by that element in the array.
Also note that in Java types (such as classes, interfaces, ...) should start with a upper-case letter, while variables (local variables, members, parameters) and method names should start with a lower-case letter.
Edit: I'm getting old ...

How do you run Multiple Files on a single screen?

Similar Messages

Maybe you are looking for