How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

I installed a samsung 840 pro SSD to my primary slot and relocated my 1.5 TB HDD to a data double where my optical drive was. I transfered my apps and Mac OS X to my SSD for fast boots and all my itunes movies, music, Iphoto etc to my HDD. I rebooted off my SSD then seen all the data on my HHD itunes movies, music, iphotos etc i cannot view on my SSD. So my question is how do you view all the content on both the ssd and hdd on the same screen with having to boot off one or the other?

No, what I'm saying is that once you boot into OSX, you should be able to see both drives listed. If you don't then either OSX is hiding the other drive because it sees it as a boot drive and is trying to protect the contents from novice users or there's another problem. If it's the first thing (i.e. it's a protection thing), then your only option would be to boot into the old drive, copy off all your personal data to an external backup drive, then reboot into the SSD and go into Disk Utilities and wipe/reformat the second drive so that you can see it as a regular secondary drive. Then when you see it as that, you can copy your data back to it.
Be carefull poking around in Disk Utility as you can easily lose your data. It's possible the Mac just isn't mounting that second drive because it sees it as another boot drive. Whatever you do, don't accidentally erase it without getting a copy of your data off of it because you obviously don't have that on your SSD now.

Similar Messages

How do you open multiple web pages on same screen macbook air

I wish to refer to multiple pages to check info on each page and copy how do you do this in safari

To create a new tab in Safari, use command+t
You can drag the tab out of Safari to make a stand alone webpage.

HT2518 I am trying to move across & view my home movie clips from my PC to Mac, but I can't view them. What do I need to have installed on the MAC to view such files? (Originally put onto the MAC from a Canon video camera)

I am trying to move across & view my home movie clips from my old PC to my new Mac but I am unsure what software I need to view them. They are from a Canon video camera originally. Please advise how this is done!

Do they have a file extension?
How about anything on the camera which might indicate what it is, like AVCHD?

How do you run Multiple Files on a single screen?

Greetings; Please only respond if you've ACTUALLY done this, no opinions requested.
I'd like to run several /.mov/mp4 files simultaneously on a single screen to simulate a 360deg view.
If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed thumbnails/2"X2" format. For example; Top, Bottom, Left, Right, Center images...
How can this be done in Premier...?...and then exported to a standard format...?
Again; Please only respond if you have ACTUALLY done this; no opinions please...
Thank YOU

If I start 5 cameras filming simultaneously (front, back, left, right, rover), I'd like to sync the files, then combine the video on a single screen in large crossed
When I did this type of shot before I had to do some tricky stuff....and the hardest part for me was keeping me from shooting the other cameras and those other camera operators, not to mention trying not to see all those reflections of cameras and everything in the car, especially when I flew over the roof on wire ! Eventually I got it done but I had to basiscally use space lights with skirts and diffusion and then tent the car off with silk ( this was in a large football field sized stage )...and then put little holes in the silk for the "lenses"...and then hire a lot of people to walk that silk around as the cameras all dollied on track with the movement of the silk... took forever to get the shot but it was beautiful if you squinted.
good luck !
ps...I when I edited this just like you want to do, with a lot of simutaneous screens within the frame, it looked so 3 dimensional people actually lost their balance watching it !

How do you re-set an apple ID password when I go into reset it states apple ID is inactive but I can't set a new one up with the email

My husband got his first iphone and we tried to set him up an apple id using his email but when we tried it stated an apple ID was already set-up. So we tried to re-set the password but then it states the Apple ID is inactive.........its a crazy circle!!!! HELP!!!!

Hi AppleGuy678,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your Apple ID:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
I hope this information helps ....
- Judy

Sending the UNIX command to install updates over Remote Desktop returns No Updates Available, but they appear when I manually check in the App Store. Why?

We use profile manager to set the URL for the Software Updates on a server inhouse, and the clients see the updates when I open the app store on their iMac, but when I try to send the update command to all Macs through Remote Desktop, RD is returning that there are no updates available.
And here's a log message:
Mar 20 09:45:17 Alisas-iMac kernel[0]: BUG in process suhelperd[261]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
Mar 20 09:45:17 --- last message repeated 11 times ---
Why does this happen? Do we really have to manually update each client or is there something wrong?

We use profile manager to set the URL for the Software Updates on a server inhouse, and the clients see the updates when I open the app store on their iMac, but when I try to send the update command to all Macs through Remote Desktop, RD is returning that there are no updates available.
And here's a log message:
Mar 20 09:45:17 Alisas-iMac kernel[0]: BUG in process suhelperd[261]: over-released legacy external boost assertions (1 total, 1 external, 0 legacy-external)
Mar 20 09:45:17 --- last message repeated 11 times ---
Why does this happen? Do we really have to manually update each client or is there something wrong?

I just installed the yahoo messenger. Every time I do that my extensions go missing. How do you fix this instead of having to keep re installing firefox?

I just installed the yahoo messenger. Every time I do that my extensions go missing. How do you fix this instead of having to keep re installing firefox?

hello, this sounds like the files in your [[Profiles|profile folder]] that store the information about your extensions might have become corrupted. please go to ''firefox > help > troubleshooting information > profile - show folder...'' then windows explorer should open up your profile folder. in there look for the files named extensions.ini, extensions.sqlite, extensions.sqlite-journal (and in some cases also extensions.txt, extensions.rdf). delete or rename those files and quit firefox, they will be regenerated the next time you launch firefox.
also see [https://support.mozilla.org/en-US/kb/Unable%20to%20install%20add-ons#w_corrupt-extension-files Corrupt extension files]

HT5246 How do you run the Flashback malware removal tool?

How do you run the Flashback malware removal tool?
Thanks

I am away from my computer and it is somewhat awkward to reply on an iPad.
> I had already done what softwater instructed. I've read that it deletes itself on other threads, but it's still in my Finder as a Device. That's what confused me, because it doesn't appear to have deleted itself.
Sorry, I wasn't clear. That is not the tool. It is the .dmg image mounted to your desktop. Next to the name you will see a small eject icon. Click on it or highlight it and choose "Eject" from the appropriate Finder menu. Once that happens you can drag the .dmg file to the trash as it will not delete itself.
> I only recently upgraded to Snow Leopard and then Lion, in quick succession. My understanding is that there were (are) variants that would have infected my computer prior to my upgrading my OS to Lion. Before the upgrade, they were Adobe, but afterward they were Java. Could it be that be that the pop-ups were/are some other variant?
Difficult to say for certain. Apple says it deletes all the common variants but does not specify which and I haven't seen the results of any testing done to verify that it finds and deletes those. The only dialogs that appeared with the initial variants were for FlashPlayer. They are depicted in the descriptions for Flashback-A on F-Secures site if you want to take a look. There have been none that I am aware of for Java, so that is probably either a web page or application that needs Java to run giving you that alert.
> If the Flashback malware removal tool didn't find anything and my Software Update is current, does that mean the vulnerability has been fixed? At least for now? I understand that I Software Update will prompt downloads in the future if and when it needs to be patched again.
The vulnerability is in Java, nowhere else, so if you don't have it installed there was nothing to fix.
If you download Java in the future it will be the latest version Apple has available at the time, which hopefully will not be subject to exploitation, yet...

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger?

Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?

McHagihara wrote:
Before I install snow leopard, I tried to move tiger into the external harddrive. My mac says it can't do because it is the OS X. So I installed snow leopard without removing tiger. After that, my computer often freezes. How can I remove tiger? Or How can I prevent my mac from freezing?
When you installed Snow Leopard, Tiger was replaced, leaving your programs and files intact.
What is causing your freezing problem is unknown, you can take Kappy's advice and remove everything, but you lose your files and free iLife programs that came with Tiger/new machine.
The 10.6.3 disk you "upgraded" with has the full 10.6.3 on it, but no free iLife suit, so a erase and install will remove what you already have installed.
You can try to locate your problem without the erase and install method by running through this list of fixes.
Step by Step to fix your Mac
But before you do anything, backup your personal data off the machine to a extenal drive and disconnect.
Most commonly used backup methods
Because if you have to follow Kappy's advice and wipe and install 10.6 fresh, it will cure your problem in nearly 99% of cases, but you have to rebuild everything. All programs and files.
How to erase and install Snow Leopard 10.6
If this is all too much for you, then STOP and call a local PC/Mac service or competant friend to assist you.
Yuo might need to install more RAM into the machine to make 10.6 run better as well.

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!

Updated to Mavericks OS X but can't use my external drive by WD My Passport. The Mac reads it but I can't add/remove files to the external drive. Help?!
The WD My Passport, I purchased back in early December 2013 & I just used it the other day after I updated my Macbook... & of course it says in the online manual it works for Mac Lion, Mountain Lion, Snow Leopard but not this new Maverick update. Is there anything I can do?

I like the free demo of SuperDuper to make clones. It's free, Tiger and Leopard ready and is easy to use. If you buy the full version you can do incremental backups.
You should use Disk Utility to do a Disk Repair, as shown in this link, booted up on your install disk, before you make a clone of it.
I then partition my external disk, in Disk Utility, with a partition that is the same size , actually a tad bigger, as my system disk. I then use SuperDuper to clone my system disk over to that partition.
With a clone on an external FireWire drive (USB drives are not bootable on some Macs) you can bootup on it to do your repairs or just run your Mac anytime you have trouble with your main drive. Be careful, there are a few external FireWire drives out there that are not bootable on Macs. Check the drive's manual to be sure.
 DALE

I have iPhoto 11, 9.4.1 installed. When my library was upgraded, I got a message the photos couldn't be imported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no longer drag them to the photo stream.

I have iPhoto 11, version 9.4.1 installed. When my library upgraded, I got a message that the photos couldn't be inported and I need to repair iPhoto permissions. How do I do that? My photos are there, but I can no oonger drag them to the photo stream.

Disable Photo Stream in iPhoto's preferences and then go back and reenable it. See if that will jump start the process. If that doesn't help try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto check its preferences to meka sure all is as you expect and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
OT

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well??

I have a external Hard drive of 1TB. I want to transfer HD movies to it from my MAC but it can only take 4 gb at a time, now i have to format it which is the best format in this situation NTFS or exFAT, as i use windows part ion as well?? plzz help
Merry Christmas

Repartition and format the drive for a Mac:
Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.

How to have multiple images on the same screen? like in the movies where you see several actions at

how to have multiple images on the same screen? like in the movies where you see several actions at the same time ....
i don't find a tutorial in adobe tv....
thanks !!

The short answer is that you'll put the source clip(s) for each inset on a different video track, all stacked up. Then use the Scale and Position effects (under "Motion" on the Effect Controls panel) to reduce their size and place them where you want.
If the content of an inset will involve edited content (where you're cutting among various clips or just trimming out unwanted content from a single clip), then you'll probably find it easier to do all those edits in one sequence, then nest that sequence in the master sequence, where you apply the Scale and Positioning effects. That will save the step of applying the scale and position effects to each edited track item.

I have apps from old work account that I can't remember the password to. On my personal phone those apps keep showing up but I can't update them because I can't remember the password. How can I delete them and download on my new account?

I have apps from old work account that I can't remember the password to. On my personal phone those apps keep showing up but I can't update them because I can't remember the password. How can I delete them and download on my new account?

Tap and hold an app until they all start jiggling and an X appears in the icon's top left corner. One by one tap the X to delete the app. when they are all gone you are free to buy them again with your own account.

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

I restored my hard drive with time machine but when I log in I get "home folder protected by fire vault and needs to be repaired. But I can't get past the regular log

Maybe you might find some info to the right>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

How do you run to Drives on the same screen. I installed a ssd and a hhd to my mac but i can only view the content of the drive only if i boot of that drive. Im try to have my ssd for fast boots and hhd for my music,movies etc. Please help.

Similar Messages

Maybe you are looking for