How do you save work in a template without changing template

Using pages;How do you save work in a template without changing template?

When you open a template it is a copy of the template you get. You can write, add, delete or change what ever you like. It will not change anything in the template. When you save you have a document, not the template.

Similar Messages

How do you save a report from VB?

Post Author: calvin
CA Forum: .NET
How do you save an updated Crystal Report (CRXI) from a VB.Net (2005) program?
We're using the ReportDocument object model, not the CrystalViewer
& it appears there's a SaveAs method but not Save.Worse, the SaveAs doesn't seem to work. I get a convoluted error message that essentially says the file is in use, even when I'm saving it to a new filename. (The file it's referring to is the copy of the original file in the Temp directory.) I can post a screen capture of the entire error message if anyone thinks it will be useful.
Thanks.

Post Author: calvin
CA Forum: .NET
"Curiouser and curiouser. said Alice." I feel like I'm in Wonderland-the SaveAs works for some reports, but not for others. The task is to create an application consisting of a VB.Net program and a set of reports. The reports must be able to be run 'stand-alone' in Crystal Reports XI, and also to be run under control of the VB program. The report output is to go to PDF, not to be viewed online. It's absolutely amazing, to me, how little support there is for this type of thing. Why? Possibly it's considered simple-and it seems like it should be, except that some reports won't run under control of the VB program. When I got involved there had been a database change so the problem initially appeared to be running the VerifyDatabase command. (The reports being tested ran fine after they'd been fixed up in Crystal-but this wasn't expected to be the last database change so there was still a need for a programmatic fixup.) After running the VerifyDatabase command in the VB program the 'fixed' report couldn't be saved to verify that the report had been fixed-and it still wouldn't run. Now, I'm leaning towards the idea that the database change was a red herring. We've found some reports that have been fixed up but still won't run. Mostly they just 'hang'. If we get any output at all (usually after killing the application) it's the same record reported over and over. Anybody got any ideas?

IMovie crashed, lost project. How do you SAVE in iMovie? Where's the file?

Just spent 4-5 hours building a complicated movie from a year's worth of footage. At some point, iMovie crashed. I think I lost all those hours of creative decision making, since I cannot see the file when I reopen iMovie.
There is no "open" command in the file menu. There is no "save" command in the file menu.
This would imply that Apple was autosaving for me to save me trouble. Hmm. I can save in almost every program I use, and revert, and save versions.
How do you save a project in iMovie? I don't see save in the file menu, as has been the steadfast tradition of Apple applications since I purchased my first Mac in 1984. What in the blazes have you done with SAVE? It is so basic.
Along the same line, where is the project file located on my hard drive? I would like to open it. Since I assume you have been autosaving to somewhere, could you please let me know where my file is saved.
<Edited by Host>

This just appeared to happen to me too. I tried clicking on the file in Movies/iMovie Projects. That didn't work.
Then, I made a copy of the file in a safe place. I noticed it was 2.2 MB, so something had to be in there. Next, I started iMovie and clicked the Project Library arrow. The project was listed there. I opened it and got back most but not all of the work. It lost a lot of my audio changes. Here's the thing. I worked until about midnight, and then left iMovie up and running til noon. You would think it would have autosaved the changes by the time I came back. I suggest making your own copy of the file now and then, just in case.

How do you save photos from import or Photo Stream to an album?

How do you save photos from import or photo stream to an album? I have a MacBook Air (which keeps telling me my start-up disk is full) and I am trying to organize photos so there aren't duplicates and triples. I have photos in events, last import, photos and albums....I feel like they are all taking up space. If I move a photo from photo stream to an album, then delete the photo from photo steam its deleted from the album. That doesn't make sense to me. There should be a way to clean up photo stream, and events, and last import by putting photos into albums. Even more bizarre; I imported photos from my 4S, and only a fraction of them transferred over.
I am completely lost. Any help would be appreciated.
Thank you!
sarah

and I am trying to organize photos so there aren't duplicates and triples. I have photos in events, last import, photos and albums....I feel like they are all taking up space.
Sarah,
Only the photos you are seeing in the events and the Photo Stream will take up space. iPhoto stores each photo only one. After you import it, it will be assigned to one event.
Then you can use it in many albums and projects. Using the photo this way will only reference the one single copy of the photo in the event. The albums don't store the photos and do not require additional space. If you delete a photo from an event, it will be removed from all albums that have been using the this photos.
What you are seing are not actually duplicate photos but different ways to access the same photos.
The "Last event" is the same event as the last one you imported. It is there for a quick access to your recently imported photos. Photos is a quick access to all photos in your library as an endless stream of photos. These are also no duplicates.
So if you want to save space and delete photos, do that by browsing your events. Deleting a photo from an event will delete the original image file and remove the photo from all albums, books, and other products. You have only duplicate photos, if you are seing the same photo twice in an event.
Even more bizarre; I imported photos from my 4S, and only a fraction of them transferred over.
That is a different problem, but it may be related to to fact that you need to free space.
If you get a warning, that the system needs space, don't do anything but update the backup of your mac and move files to an external disk to free space.
It is not save to keep working, when the system is running out of space.
How much free space do you have? Anything below 15GB free space is really critical.
-- Léonie

How do you save from Photoshop back to iPhoto?

How do you save your external edits from Photoshop back to iPhoto?
Fine, I know how it can be done ONCE : you simply flatten the image and then hit Save, and you see your edited image in iPhoto.
But, what if you FIRST want to save the .psd document complete with layers outside iPhoto, THEN flatten the image and save as a jpeg back to iPhoto? I tried this yesterday. I saved as a PSD file - with all layers and a new name - to my Pictures folder. Then I flattened the image and wanted to save it to iPhoto, but the temporary iPhoto location had disappeared from the Photoshop Save dialogue and Photoshop now displayed it under the new name.
This is annoying : you've got to save the PSD document first in order to preserve the layers. But when you do this, you lose the ability to save the image a second time, all layers flattened, back to iPhoto.

But if I'd flattened the psd without saving it as a psd, I could simply have saved it back to iPhoto (I've done that before).
Hold on - perhaps that's the answer...
What if..
1. I flatten the image and Save it back to iPhoto, then ...
2. Undo the 'flatten image' in Photoshop, then save THAT version as a psd?
I'll try this and let you know if it works.
ETA - Yay it works! Shoulda thought of that right off. I blame toothache

Can i put Microsoft word onto the ipad, if so how can you save the documents, can i put Microsoft word onto the ipad, if so how can you save the documents

can i put Microsoft word onto the ipad, if so how can you save the documents, can i put Microsoft word onto the ipad, if so how can you save the documents

Welcome to Apple Support Communities
If you have Office 365, you can install Office in your iPad > https://itunes.apple.com/us/app/suscriptores-office-mobile/id541164041?mt=8
If you haven't got Office 365, there are other apps that work with Microsoft Word files, like Documents To Go > http://www.dataviz.com/dtg_home.html

How do you save an iMovie project as a file?

how do you save an imovie as a windows file?

You first have to format the External drive as Mac OS Extended. This can be done with Disk Utility which is located in the Utilities Folder inside the Applications Folder. Once formatted as a native Mac OS drive, iMovie will allow you to 'turn on' the visibility of the external drive. Make sure to make the hard drive visible in the Events Library by going to the View Menu > Group Events by Disk. In the Projects Folder you should also see the same drive.
Drag your Project folders to the external drive icon in the Project Library. Also drag your Event Folders to the external drive (but make sure to drag it to the icon that is visible in the Event Library, don't drag it to the Project Library drive icon).
This dragging operation will 'duplicate' your Project Folders and Event Folders on the external drive. So to make space on your internal drive, always delete the original folders AFTER you make copies of them on the External drive. In the future when you are importing video into a New Event, make sure to choose the external drive as the location for the the New Event folder. Similalrly create a new Project Folder in the external drive location in the Project Library.
iMovie doesn't have save menu, it auto-saves in the background continuously as you work on the Project. That way you don't lose any work by forgetting to save the project.

How do you save your artwork in Photoshop CC 2014 as an PNG or JPEG file when it doesn't give the option?

How do you save your artwork in Photoshop CC 2014 as an PNG or JPEG file when it doesn't give the option?
Thanks for your time and help in advance.

Thanks for replying. I actually got it to work. I had my work set to 32 Bits/Channel in stead of 16 or 8. Once I changed it to 16bit/Channel, it gave me the option to save as either file. Thanks again.

How do you save changes made in iPhoto, and export the changed file. It keeps reverting back to the original.

How do you save changes made in iPhote, and export the changed picture file? When I select export, current format, it reverts to the original, wiping out all my work.

Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

HELP - how do you save pictures through the recovery mode?

How do you save pictures through the recovery mode. I have the black screen with cursor and despite trying all the tips noted here nothing seems to fix the issue. These have included using Utility disk to re-install OS-X, repairing the disks. Also tried the holding shift on start up and entering username and password. Also tried internet recovery and then repair and re-install. Nothing works!
Happy to restore from a back up, but I have been rubbish and not backed up for a long time. Also happy to delete and re-install completely but don't want to loose pics.
Please let me know any suggestions!!

bemsley wrote:
Is it possible to attach an external drive and copy across files through the utility function?
That requires that you can boot the MBP.
Or to boot the mac using the time machine back up?
You can try using startup manager:
http://support.apple.com/kb/ht1310
But you still need a working volume where you can install the backed up data.
The good news is that since you have a Time machine backup, you can transfer that data to another Mac or clone:
http://pondini.org/OSX/Setup.html
Ciao.

Premiere Element 9, how do you save your favorite transitions and 1080/60p

In Premiere Element 9, how do you save your favorite "transitions" and or "effects" to a folder like all the Premiere Element versions, theres no right clicking.
Does anyone know if the Panasonic HDC-tm700 1080/60p would work in version 9 ?

As you can see from this discussion from Muvipix.com, that camcorder does have some challenges.
http://muvipix.com/phpBB3/viewtopic.php?f=89&t=8453
In 60p mode, it uses a proprietary system that most third-party editors, including Premiere Elements, have problems with.
Using the software that came with the camcorder to convert it to 60i seems to make it compatible.
I'm not sure why Panasonic decided to make its video format non-standard. But it looks like the easiest solution is to edit that 60p video pretty much only with the software they give you with the camcorder.

Where does iPhoto save imported files???? how do you "save"?

ok this is driving me crazy:
I've imported photos and movie clips from my camera through usb through iPhoto.
Where does iPhoto save these files?
I've opened iMovie to find the movie clip and I can't find it anywhere...
also: after editing a photo in iMovie, how do you "save" it?

Chris
You’ve a bit of a learning curve ahead of you as you obviously haven’t really understood iPhoto, what it is and how it works. You could do yourself a favour and have a look at the tutorials at http://www.apple.com/ilife/tutorials/#iphoto
To specific cases:
When you press "done" it doesn't save it (find the photo in its original file and open it with Preview, you'll see it hasn't been saved).
Yes, but it has! You see iPhoto will always preserve your Original file. So when you make edits it carries out these on copy of the file. You can see this in the iPhoto Window. There is no way to make iPhoto edit the original file.
I have opted for iPhoto not to duplicate my photos and keep its own library (to me that doesn't make any sense, my photos are about 15GB, I wouldn't want them to turn into 30GB for no reason!),
1. The best solution for that it to allow iPhoto to copy the files into the Library and then remove your own copies.
2. When you go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import', you are running what is called a Referenced Library. In a Referenced Library iPhoto will not copy the files on import, but rather simply reference them on your HD. To do this
it will create an alias in the Originals Folder that points to your file.
It will still create a thumbnail and,
if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Importing and deleting pics are more complex procedures
2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
If disk space is an issue, you can run an entire iPhoto Library from an external disk:
1. Quit iPhoto
2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
so the problem still exists, why doesn't it save new photos in my pictures folder?
Because you told it not to. When you run a Referenced Library +you are responsible for File Management+. Remember that bit above where I said
1. Importing and deleting pics are more complex procedures
You need to put the files where you want them, then import them to iPhoto. Iphoto has no control over any file outside the Library Package. So when it comes to deleting things you’ll need to remove the pics from iPhoto and then go and root them out from your folder structure by hand.
None of this is the case if you run a Managed Library.
or ask me where to save them?
Because that’s not what it does. Check out Image Capture for that.
I'm worried that if I now let it save all my new photos to its iPhoto library (which is basically a virtual library as I understand it)
What do you mean by a “virtual library”?
and in a year's time I change laptops I run the risk of loosing photos as I won't know which photos are were (now I can do a back up to an external drive simply by copying the folders I choose from the pictures folder.
If you run a Managed Library then backing up and migrating are both very simple. You simply back up the iPhoto Library or move it as the case may be. There are many, many back up utilities that will do incremental back ups if the Library: Time Machine, DejaVu Chronosync are several but there are a hundred more. Search on MacUpdate.
If you run a Referenced Library you must +back up the Originals and the iPhoto Library+ (to get your Albums, Modified Versions and so on). Migrating rto a new machine is a bear too, as you cannot allow the path to the files to alter. (See my pitfall no. 3 above.
Worst of all: a mixed Managed/Referenced Library: a recipe for data loss.
My strongest advice to you is to start over with iPhoto. Create a new Library: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and import 100 pics into it and explore it for a week or two. Get to know the ins and outs a bit and se how it works. Then decide if it’s the right app for you. By all means post back if you need more info.
Regards
TD

How do you save voice memos

How do you save voice memos, and use them as ringtones or text tones?

From the Users Guide:
Syncing Voice Memos
iTunes syncs voice memos to your iTunes library when you connect iPod touch to
your computer. This lets you listen to voice memos on your computer and provides a
backup if you delete them from iPod touch.
Voice memos are synced to the Voice Memos playlist. iTunes creates the playlist if it
doesn’t exist. When you sync voice memos to iTunes, they remain in the Voice Memos
app until you delete them. If you delete a voice memo on iPod touch, it isn’t deleted
from the Voice Memos playlist in iTunes. However, if you delete a voice memo from
iTunes, it is deleted from iPod touch the next time you sync with iTunes.
You can sync the iTunes Voice Memos playlist to the Music app on iPod touch using
the Music pane in iTunes.
Sync the Voice Memos playlist to iPod touch:
1 Connect iPod touch to your computer.
2 In iTunes, select iPod touch in the Devices list.
3 Select Music at the top of the screen.
4 Select the “Include voice memos” checkbox and click Apply.
Some users have had to create the Voice Memos playlist since it did not get automatically created.

How do you save a web PDF to the iPad2?

How do you save a web PDF to the iPad2? I want to have a camera manual on my iPad.

In Safari, click on the PDF link and from the context menu choose Open in New Tab. Then click on the tab: The PDF opens in Safari. At the upper right click on Open In, and from the menu choose Adobe Reader.

How can you save an app's data?

Hi, how can you save an app's data? For example, if I want to switch some applications on my iPod with those were on my iTunes Apps Library, iTunes will force to remove the apps that was on my device and sync the apps that I want onto my iPod. But once the app is removed from my iPod, its data will be erased too, so, for example months later, I want to put them back onto my iPod, I will lose all the apps data and games progress. So, I just want to know the way that people save their apps data.

Yo can't. apps are locked to the account thatpurchased them and in-app purchases can only be mad with the account that originally purchased the app.
You will have to recover use of the first account
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.
If necessary:
Forgotten Security Questions/Answers
You need to contact Apple by:
1 - Use the Express lane and start here:
https://expresslane.apple.com
then click More Products and Services>Apple ID>Other Apple ID Topics>Forgotten Apple ID security questions.
or
Apple - Support -form iTunes Store - Contact Us
2 - Call Apple in your country by getting the number from here:
http://support.apple.com/kb/HE57
or
Apple ID: Contacting Apple for help with Apple ID account security
3 - Use your rescue email address if you set one up
Rescue email address and how to reset Apple ID security questions
For general information see:
Apple ID: All about Apple ID security questions
If you have not uses any of the $10 you redeemed to the new account, you can likely get that refunded by contacting iTunes
Contact iTunes

How do you save work in a template without changing template

Similar Messages

Maybe you are looking for