How do you select special media tray from Adobe Photoshop CS3 on the Mac?

I can select the special media tray (HP Photosmart Pro 9180) from Word for Mac and Illustrator CS3 for the Mac, but I don't know how to select it from Photoshop CS3 for the Mac.

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells.

Similar Messages

I have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

i have switched from PC to Mac how do i use my windows version of adobe photoshop CS3 on my MAC?

rebel1568,
All Photoshop versions through CS6 came with platform-specific licenses, either Windows or PC. You could get a cross-grade of platform swap at a nominal cost but not for older versions, only for whatever Photoshop versions was current at the time.
CS3 is totally out of the upgrade or cross-grade loop. You'd have to buy a new license for CS6 Mac or subscribe to Photoshop CC, as Trevor points out.
Curt Y is correct in that CS2 will not run on current Mac-Intel machines. You would need a used Mac G5 or G4 with a PowerPC (IBM) CPU, which have been obsolete since mid 2006.
Of course, you could run your Windows on your Mac if you installed and ran BootCamp or Parallells.

How can I select to send an from another email account within the inserted gmail account?

How can I select to send an from another email account within the inserted gmail account?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
The MAS should use any credits first and then apply the remainder to a listed bank card.

How do I save down a version from adobe photoshop CC (2014) to version 6?

How do I save down a version from adobe photoshop CC (2014) to version 6?

You don't, you just save.
PSD files are mostly backward compatible (back to Photoshop 3.0).

How can I select pages to print from a Word document using the report generation 'print report' vi?

I have researched the knowledge base and found:
Printing A Range of Pages or Number of Copies of a Report Using the Report Generation Toolkit in LabVIEW.
This seems to be from a previous version of LV. I am using LV2010. The instructions given do not match up with the current vi. The information did provide a tip and drilling down into the vi I was able to insert the from/to page numbers at the printout invoke method, however this prevents the print function from working in that it can no longer find the default printer.
The error message is:
Error 1015 occurred at NI_ReportGenerationToolkit.lvlib:Word_Print.vi -> NI_Word.lvclassrint Report.vi ->
error 1015 is: Printer is not responding. Check printer configuration.
Any ideas how I can make the modification to print, for example, pages 24 through 29 out of a 32 page word document?
Thanks,
Chris

Hello, take a look at this article. Unfortunately the Generate Report Get Data to Modify.vi was remove since RGT 1.1.3 release. That being said, we can try to find a workaround. See "Configuring a Printer Through the Windows Dialog in LabVIEW", open the GetPrinterSettings.vi, at the PrinterSettings property node you can select the from/to page. I hope this helps.
Alejandro | Academic Program Engineer | National Instruments

How do you cut and paste text from Adobe Reader 11 into Word?

Using Windows 8.1. Recently purchased Adobe Reader 11. Need to cut and paste text from PDF into Word docs. Docs are not locked and content should be available for editing. Have figured out how to highlight the text through the Comment tools, but nothing (right-clicking, going to Edit pulldown) menu gives me a Copy option. How do I cut and paste the text?

Good to know that I got what I paid for with the Export PDF.I just went
into the document that I am trying to cut and paste from and highlighted a
piece of text. Clicked right, checked the Edit pulldown, and then did
Ctrl+C (assuming you meant Ctrl and then C, rather than holding them both
down together). Still no Copy option anywhere.
Properties for the document I am trying to work with do say "Content
Copying: Allowed" under Security. Since I can highlight text, I assumed
that the text is there (not a photo scan) so that I can copy it. Should I
look somewhere else under properties to confirm this?
As I did last night, I also opened up a document that I have cut and pasted
extensively from before-so I know the text is there and manipulable.
Attempted to cut and paste from it, using the same methods above. Again,
no option to copy with any of them.
Perhaps I should clarify that by cut-and-paste, I do mean that I want to
copy the text from the original and then transfer it to a Word doc that I
am writing. I am not trying to do anything with the original other than
copy from it--not cutting anything out of the document itself.
Is there a way to do this with the Adobe 11 reader. At this point, I am
wondering if I need to uninstall Adobe 11 and try to go back to Adobe 10 or
whatever the reader was that was installed on my computer when I bought it
(Dell Inspiron touch-screen laptop purchased in May 2013, if that gives any
idea of which reader might have been installed there. That version did,
however, have some other limitations that made me want to get Adobe 11. Any
ideas about what to do now.
M. Christian Green, JD/PhD
Senior Fellow, Center for the Study of Law and Religion
http://cslr.law.emory.edu/people/person/name/green
Book Review Editor, Journal of Law and Religion
http://cslr.law.emory.edu/publications-lectures/journal-of-law-and-religion/
Website
http://mchristiangreen.com
LinkedIn
http://www.linkedin.com/in/mchristiangreen
Twitter
http://twitter.com/mchristiangreen
On Sun, Nov 16, 2014 at 3:00 AM, Gilad D (try67) <[email protected]>

How do you select/move multiple clips from one timeline to another?

Has to do with combining multiple edls from Avid - required due to an issue with duplicate reel names in the original Arri footage. I can move them one at a time, but it is very tedious. Is there a way to select multiple clips and move them together?

Actually discovered the magic of the shift key.
IRCP Beauty doesn't recognize multiple timelines in a session, so first you have to at least get the footage on multiple tracks in the same timeline. Shift + drag on the track will allow you to move it to another timeline. Also Shift + drag on the center of the first clip in a sequence will slide the entire sequence down - which is how timelines end up getthing offset all the time. Also, if there are multiple tracks in a timeline and some are locked and some aren't, Shift + drag on a clip will slide ALL UNLOCKED tracks in the timeline.
Finally, Shift + click on either in or out marker moves both points up or down the timeline.

How do you play a rented movie from my iPhone 4S to the TV through airplay and Apple TV?

I attempted to rent a movie on my iPhone 4S and play it through airplay to my Apple TV. I could not at any time view any video from that rental but could here the soundtrack. Is there some setting/adjustment that I failed to complete?

To answer quickly, you cannot move a rented movie from your iPhone to your computer (or anywhere else). You'll have to watch it on the phone.
Regards.

How do you handle a large response from a command that overflows the buffer?

When I am SSHed into a radio and execute the mca-status, the output is very long and is truncated.
action 040 cli command "mca-status" pattern "#"
Here is the output of this mca-status command. The items I want to access are:
wlanTxRate=240.0
wlanRxRate=181.0
distance=0
With such a long output, can an Applet work?
XM.v5.5.6# mca-status
deviceName=2.4_AP.11,deviceId=DC:9F:DB:6A:A2:17,firmwareVersion=XM.ar7240.v5.5.6.17762.130528.1755,platform=Rocket M2,deviceIp=192.168.2.11
apMac=DC:9F:DB:6A:A2:17
wlanOpmode=ap
wlanConnections=3
wlanUptime=1233005
essid=2400
freq=2429
signal=-40
noise=-89
ccq=991
uptime=1233005
loadavg=0
memTotal=62012
memFree=42868
memBuffers=2340
ackTimeout=24
distance=0
lanIpAddress=0.0.0.0
wlanIpAddress=0.0.0.0
wlanTxRate=240.0
wlanRxRate=181.0
wlanTxLatency=1
wlanPolling=1
wlanPollingQuality=79
wlanPollingCapacity=63
lanRxBytes=1154446904
lanRxPackets=486877943
lanRxErrors=0
lanTxBytes=2283315134
lanTxPackets=62737619
lanTxErrors=0
lanPlugged=1
lanSpeed=100Mbps-Full
wlanRxBytes=2786682138
wlanRxPackets=69646125
wlanRxErrors=1
wlanTxBytes=491437955
wlanTxPackets=488901868
wlanTxErrors=0
wlanRxErrNwid=1210557
wlanRxErrCrypt=0
wlanRxErrFrag=0
wlanRxErrRetries=0
wlanRxErrBmiss=0
wlanRxErrOther=0
latitude=0.000000
longitude=0.000000
cfgCrc=1dee1a80
XM.v5.5.6#

How is it truncated? You should be able to extract something using:
regexp "wlanTxRate=([0-9\.]+)" $_cli_result match txrate

How do you obtain a previous version of Adobe InDesign after purchasing the latest version?

If I purchase the full version of the latest Adobe InDesign software (currently version CS6), how do I obtain a copy of a previous version of InDesign (such as version CS5)?
I need to be able to generate CS5 INDD files for the completion of a project, but I don't believe this is possible unless I have CS5 installed.
I am aware that I can save to an IDML file in InDesign CS6 which can be opened in a previous version of Adobe InDesign, but the requirements of the project require INDD files that can be opened in CS5.

Thanks again Jeff, I really appreciate it.
In case anyone reading this needs it, the following link describes the backwards license process:
http://www.adobe.com/volume-licensing/policies.html - CLP and EA policies section.
And the information link for volume licensing available:
http://www.adobe.com/volume-licensing.html

HT201301 How do you delete a purchased movie from an ipad 2

How do you delete a purchased movie from n ipad 2

I expect the same as on the original iPad. Open the Videos app and display all movies. Touch "Edit" in the upper right corner and then touch the "X" for the movie you wish to remove.

How do you install 3rd party plug-in in Photoshop CC

Our fine customer service/tech support wouldn't help me with my question/problem because 3rd party plug-ins are not an Adobe product.... Silly, isn't it since all I want to know is how do you install "any" plug-ins into Adobe Photoshop CC. Can anyone with any sanity here offer a solution?
Thanks.

It could be complex depending on your OS and user ID permissions. Adobe Photoshop CC Mac version only supports new Mac with Intel 64bit processors, Photoshop CC windows supports both 64 bit systems and 32 bit systems. If you have a 64 bit system both the 32 bit and 64 bit version of Photoshop are installed so windows has both a 32 bit Plug-in Folder and a 64 Bit Plug-in Folder. Prior to CC Photoshop Preference let you add you own Plug-in folder tree to Photoshop Plug-in folder tree. I still install Plug-in that way however I have to add the link manually for adobe removed that option from its Preferences UI in Photoshop CC. I always have more the one versions of Photoshop and all installed versions use the same Plug-in, Actions and Scripts that I add to Photoshop. There is One exception. The Way the Image Processor Pro plug-in script is coded expects it and it default XML file to be installed into Adobe's folder so I made and exception for it. You user ID need to have permission to modify and add files to system folders if you want to install plug-ins into the folders that Adobe created for third party plug-ins to be installed into.
Adobe Photoshop CC installer creates a folder in Photoshop version ...\Plug-ins\... so on my Window 7 64 bit system there are two folders
"C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Plug-ins\" and
"C:\Program Files (x86)\Adobe\Adobe Photoshop CC\Plug-ins\"
All I add to these are the Adobe ScriptListener.8li Plug-in and a link to my Plug-ins folder.

Import catalogue from adobe photoshop elements

How can I import a photo catalogue from adobe photoshop elements (9.0) into Aperture?
Thanks for every hint,
Penibel

Yes, use File>Write tags and properties to file and Elements should pick up the metadata keywords this creates. However, if you have raw files or tiffs from an epson scanner, the metadata creation can be unreliable.

Transferring Images from Adobe Photoshop Touch into Adobe Photoshop on your Desktop Computer | The Russell Brown Show | Adobe TV

Getting images from Adobe Photoshop Touch just got much easier. You can now transfer images from Adobe Photoshop Touch into Adobe Photoshop on your desktop with help from the new Adobe Cloud storage servers. You can also automatically sycronize into the Adobe Cloud as well.
http://adobe.ly/N42byj

Will that plug in work with PS Elements 9?

1 month from adobe photoshop

I got to get my approval to use 1 month from adobe photoshop causes received the first annual fee credit card information on you. I would like the card to refund the fees to be relevant. software license we will use when we send monthly. Waiting for answers in a hurry.

Aliy, this is a user forum, and we can't help you with account issues. You might find an answer on this Help page
Manage your membership and payments | Creative Cloud

How do you select special media tray from Adobe Photoshop CS3 on the Mac?

Similar Messages

Maybe you are looking for