How do you select the ical calendar which an event is added to?

Since switching from iPhone 3GS to iPhone 4, I cannot choose which ical calendar to add an event to. It used to be an option when you created a new event, but now it creates all events in a new calendar, called 'calendar', which I neither want, nor seem to be able to delete. There appears to be no way to select the calendar or edit which calendar the event appears in. This is important to me as my 'work' calendar is shared with multiple colleagues.
Can anybody help?
Al.

Perfect, thank you!

Similar Messages

  • How do you set the default calendar in iCal

    I have 6 different calendar. I want a certain one to be the default calendar in iCal but cannot figure out how to make it happen.

    Andrew,
    The most you can do to the calendar you want to be 'default or so say' is to drag it to the top of the list in iCal. What that will do is if you get an invitation in Mail it will add it to that top calendar.
    If you mean you want to be able to choose were your Notes and To Do's goto? Go to while in mail (Mail)/(Preferences)/(Composing)/ and in the (Create Notes & To Do's in:) select (On My Mac). Now you will have an option of what calendar you want to use when you make the Note/To Do.
    Other then that you have to select the Calendar you want as default.
    Hope that helps,
    Weston
    Message was edited by: westongallagher

  • New To Illustrator CS4  - How do you select the Arc Tool to Draw Arcs?

    PDF on Illustrator doesn't indicate how to select the Arc tool. Extract from toe pdf follows:
    Draw arcs
    1 Select the Arc tool .  (HELP -- I CAN'T LOCATE THE ARC TOOL).
    2 Do one of the following:
    • Position the pointer where you want the arc to begin, and drag to where you want the arc to end.
    • Click where you want the arc to begin. In the dialog box, click a square on the reference point locator to determine the point from which the arc is drawn. Then set any of the following options, and click OK.
    Length X-Axis
    Specifies the width of the arc.
    Length Y-Axis
    Specifies the height of the arc.
    Type
    Specifies whether you want the object to be an open path or a closed path.
    Base Along
    Specifies the direction of the arc. Choose X Axis or Y Axis depending on whether you want to draw the base of the arc along the horizontal (x) axis or vertical (y) axis.
    Slope
    Specifies the direction of the arc’s slope. Enter a negative value for a concave (inward) slope. Enter a positive value for a convex (outward) slope. A slope of 0 creates a straight line.
    Fill Arc
    Fills the arc with the current fill color.
    Note: To see a dynamic preview of the arc as you set options, double-click the arc tool in the Tools panel.

    You're welcome.
    Can i suggest that you explore al the tools there are drop down menus and on the panels as well in the upper right hand corner there is a drop down with useful functions and options. Also look at the control panel under the menu bar as you change tools to see the option each tool has and also some tools have further settings if you double click the icon in the tool bar other have option if you click in the document window once you have selected them.
    But the best advice I can give you is to buy Mordy Goldings book Real World Illustrator CS 4 he also has one for  the suites, it is a worthwhile investment.

  • How do you change the order in which effects are applied?

    Hello
    I'm using Logic Express 8 and can't work out how to apply reverb so that the effect is added after the volume automation has been applied. In other words, at the moment if the track volume dips, so does the reverb. I, naturally, want the reverb to be applied constantly, not to be cut by automated volume changes.
    Hope this makes sense!
    Thanks in advance for any help.
    Dave

    I'm not sure that is the case.  Maybe you automated the reverb along with the volume?  Anyway, you could create a bus channel and send the track to the bus that would be armed with the reverb (a good idea anyway in case you want more tracks to share the reverb).  You can send as much or as little of the signal as you want and you can even automate the amount or the volume of the reverb channel.  Put the reverb to 100% wet and mix to taste.

  • How do you select the center of a box in CS5?

    I notice in CS5 that you can no longer select a box - say a picture box - click on the center and snap it to a guide or move to a location. You can only grab the edge of the box to move it. I'm sure this is a vast improvement but I don't like it. Is there a pref to turn on or off to be able to select an object at it's center? Thx.

    Hmmm. ID doesn't put the old center dot in a frame anymore, at least not most of the time, but the center should still be snapping, regardless of where you grab the frame. I'm not seeing any necessity to grab the edge (though if you have the content grabber turned on it's not difficult to accidentally move the content instead of the frame). What are you seeing?

  • How can you select the "from" in Mail with multiple accounts?

    Is there a simple dropdown to select the "From" field in Mail when using multiple accounts?
    All I can find is a support page saying From is defined by the email account that is highlighted and active.
    Thanks

    Hoo,
    When you hover your mouse over your name in the from field it presents a little arrow. Click it and it lets you select who you are sending an email as.
    Also if your reading an email that you got say to your @iCloud.com email when you hit compose it will automatically select your @iCloud.com email to compose your email.
    Hope that helps,
    Weston

  • How are you liking the new calendar with the new os?

    I am trying to work with the new calendar on my ipad. this new system has added steps that I think are not necessary. for example when I want to see my day I now have to go to the magnifying glass to see it, rather than just touching the day itself. more confuising. any one else?

    Hi Scott
    I tend to use the control center as little as I need to, generally do as much as I can from designer. Ideally the panels and options in control center would have just been available from the designer, but it is still needed for certain deployment options and so forth. Haven't seen the component pallette
    I do like the new interface, have now been using it longer than most. Interested to hear what operations you find different/unusual.
    There are some changes with the menu system such as the gallery that made changes in some of the behavior like when a time dimension is created, you have to use new via the gallery to see the option to create the time dimension (as opposed to just being on the menu..new time dimension). Another example is creating a Gateway location type, you now have to use new (via gallery) to create a DB2 Gateway Location, since the new location via the DB2 node will create a location for use with the code template maps - if you create a module and use the location created via the wizard it will be of the correct type.
    Cheers
    David

  • How do you change the time zone for all events?

    I didn't have the correct setting checked for my time zone. It appears that I now have to go back and correct each event. Is that true? It would be impossible since I have over 1,000 events in my calendar.
    Any suggestions? Thanks - Kris

    Go to SETTINGS on your iPod Nano 6G.
    From SETTINGS -> GENERAL -> DATE & TIME -> TIME ZONE and select the right zone/location form there.
    Axel F.

  • How can I select the filename, in which the results are stored, dynamically?

    I want to change record file name several times in a TS execution using "statements".
    Which variable should i change in the statement? And what should i do to access that variable?
    Thanks a lot.
    Baris

    Hi,
    sansar wrote:
    Yes, I should use Report Options callbacak but i cannot understand how.
    I have added ReportOptions callback into my sequences. First of all, why is (is it) the ReportOptions sequence empty when i select it in the "View"  menu. Just the parameters can be seen. Does it mean what was done normally when ReportOptions is not added will not be done anymore, since the sequence is empty? Or, are the operations normally done but hidden from the user?
    Not all Callbacks actually do anything, and this is one of them. But you can see if it has any steps by looking at the original in the Process Model Sequence File - "SequentialModel.seq". On the other hand, if it did have some steps, such as the PostUUT, there is a setting, I think its in the Preferences, that will copy the exact Callback instead of creating an empty one.
    sansar wrote:
    Secondly, i can guess that the parameter i should change is the "Parameters.ReportOptions.ReportFilePath" but it is only available in the ReportOptions sequence. I think that i should be able to have it in the MainSequence (or in any of my subsequences) because there is the place i want to modify the report file.
    The thing with the ReportOptions, is it allows the user to setup the Report Options. Therefore, although there are properties such as ReportFilePath, they only become effective when other properties have been set with the correct value, usually a boolean. You can see this by setting the various controls in the Report Options Dialog and seeing what is enabled and disabled. There are other properties that allow you to setup the component parts of the filename, such as ReportBaseName.
    The actual report pathname is not setup until a step in the process model entry sequence (Test UUTs or Single Pass) is performed. This sequence is called 'Determine Report Pathname' (this might not be the precise wording) and is then stored in a Local variable. 
    You could obtain this setting in your MainSequence by using the lookup string "RunState.Caller.Locals.ReportFilePath".
    Hope this helps
    Regards
    Ray Farmer
    Message Edited by Ray Farmer on 11-23-2006 07:41 AM
    Regards
    Ray Farmer

  • How do you query the Hotmail Calendar with a freebusy URL to get an XML response ?

    Hello,
    I've posted this on the Exchange Server Legacy thread, but they point me back here....
    Assuming that Outlook's (Hotmail's) Calendar service still supports XML FreeBusy requests, what am I doing wrong here ?
    I'm sending this GET request to obtain an XML return that I can then further process:
    GET / HTTP/1.1
    owa/public/?cmd=freebusy&start=2014-12-04T14: 00:00+01:00&end=2014-12-08T16:00:00+01:00&interval=30&u=SMTP:*** Email address is removed for privacy ***
    Translate: t User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.2; .NET CLR 1.1.4322)
    Content-Type: text/xml
    Host:
    www.calendar.live.com
    (Translate: t comes from http://www.infinitec.de/post/2004/12/31/Retrieving-a-users-availability-(freebusy-data).aspx)
    (User-Agent seems needed in order to get an XML response)
    It keeps giving me "400 - BAD REQUEST".
    What is the correct syntax for this  ?

    Hi,
    From your description, I would like to clarify the following things:
    1. If you use an Exchange account, you can use an OWA command to retrieve Free/busy information for a particular user.
    2. In your case, you use an Hotmail account. Actually, we have a dedicated support team regarding the Microsoft Outlook.com . I recommend you ask your question on our Microsoft Outlook.com forum which is staffed by more experts specializing in this kind
    of problems. Your understanding will be appreciated.
    For your convenience:
    http://answers.microsoft.com/en-us/outlook_com/forum/ocalendar?tab=Threads
    Hope this can be helpful to you.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Amy Wang
    TechNet Community Support

  • How do you select the turbo boost 3.06ghz option on the new macbook pro retina display

    I was wondering how to get the turbo boost option on the 2012 Retina Display Macbook Pro of 3.06ghz for the processer ???? Need help

    You don't select it as an option when using the macbook, it just happens when the system needs more speed. Also if you think you're macbook pro is "overheating" while you're using it, it really isn't because it would come up with a heat warning if it was overheating. Your mac will tell you when its running out of spec so when it gets dangerously hot, you will know.
    Regards,
    Noahwhite2014

  • HT2513 How do I print the iCal calendar in dayrunner format?

    I would like to print my calendar i the Dayrunner weekly format. Does anyone know how to do this?

    That's the correct code.  I tried it on a test page and it worked as advertised.  You can see it on this test page: Page-1, What's the URL of your site so we can examine it first hand?
    Try clearing your browser's cache (Command+Option+E for Safari) and reload the page. 
    OT

  • How do you select the play length bar in an iphone/ipod?

    Sometimes I have a single song file of a book which is quite long, 10 hours, so I need to be able to restart where I left off. It is easy to mess up and end up back at the beginning. I have noticed that sometimes Imusic shows a play back length bar which would allow me to go back into the middle of a long song, rather than start all over again. I can't figure how this play length bar is activated, even though I have seen it often. See the upper bar in image below.

    When your music is playing, with the screen as shown in your first picture, tap the screen to make the scrub bar appear.

  • Surround bounce - how do you select the number of channels?

    When doing a surround bounce, Logic is always giving me a 5.1 even though I want a different number of channels. I have my surround setup selected in audio preferences, and it seems like it should bounce using that same config, but it does 5.1 either interleaved or split. I don't see any options for number of channels in the bounce window.
    Any ideas? It seems like this worked in earlier versions of Logic, but with the latest I can't get any other number of channels.

    Found where it's set in the app, but looks like it's buggy in 9.x. I went back and checked 8.x and it works fine there.
    Anyone want to try it out? Under project settings->surround format, you should be able to set a format and then do a bounce with Surround Bounce and Interleaved selected. In L8, the bounce would be the number of channels selected in project settings, but in 9, it looks like it always bounces 6 channels regardless of settings.
    If someone could take a minute and test it out, I'd really appreciate it - I'll be reporting it to apple but I'd like to make sure it's not just my system. Thanks.

  • How do you remove the MyStart link which keeps overriding my homepage?

    I dunno how I got the link that keeps overriding my homepage.
    Anyone able to share?
    Thanks much.

    I did a google search of "what is mystart".  Check that search link too.  There are lots of hits on this topic.
    It may have something to do with IncrediMail.  So check this discussion.
    Check your browser's extensions/add-ons for a add on you don't recognize (possibly one named MyStart).  If you find such an add on delete it and restart your browser.
    Another possibility, Fastest YouTube Downloader,  See comments on the age I linked to.

Maybe you are looking for