How do you send iMessage to iPad from iphone, I cannot type "@" in message

I have my ipad updated and set it to use my email for the imessage in my iPad
then, I realized that I cannot type "@" in the imessage in iPhone (therefore, cannot type mail address)
how to do send an imessage from iPhone to iPad?
thanks for the help

I am having the same problem. The email addresses for my contacts do not appear on the iPhone, they do appear on the iPad. So if I want to imessage my wife from my iPhone I only get the option to send to her email address, if I do it from my iPad I get her email.
The only way that I have found so far is to go into my Contacts and at the very bottom select Send Message, then I can select her email.
For some reason the @ is missing since when I select the 123 button it gives me the dial keyboard instead of the special characters keyboard.

Similar Messages

  • How do you send iMessage TO an iPad?

    How do you send iMessage TO an iPad? Everyone tells me to send message to the Apple ID email. The problem is that I can only type numbers in the send to box. Even selecting contact from addressbook I can only choose a phone number, not the email. So for the iPad I can send iMessages to an iPhone but not to iPod or iPad becasue these devices dun hv a number.

    When I tap on the compose button it automattically brings up the keyboard.  Yours doesn't do that?  Also, when I begin typing the name of a contact, it defaults to their phone number.  If I scroll down, then I can see emails for contacts with that name.  Hope you get it figured out!
    Another tip is to make sure that your ipad is set up to receive messages using a different email than your iphone.  You can change that in your settings.

  • How do you update 1st generation ipad from iOS 4 to iOS 5

    How do you update 1st generation ipad from iOS 4 to iOS 5

    If your iDevice is using a version of iOS lower than 5, you will need to use iTunes on your syncing computer to perform the upgrade. Use the Apple link below as a guide for the upgrade.
    http://support.apple.com/kb/HT4972
    Also read the instructions from the section entitled "Update your device using iTunes" at the link below.
    http://support.apple.com/kb/HT4623
    Information regarding transferring purchases from your iDevice to iTunes on your syncing computer can be found at the link below.
    http://support.apple.com/kb/ht1848

  • How do you send a imessage to ipad from iphone

    How do you send a imessage to ipad from iphone

    The iPad must have iMessage registered and enabled, and you need to address the iMessage to an email address that is set up and selected to be used with iMessage on the iPad. If the iPad owner also has an iPhone, an iMessage can be addressed to the iPhone's cell phone number if the iPad owner has their iPhone number selected to be reached at with iMessage on the iPad.

  • How do you send photos via bluetooth from i mac to a paired device

    How do you send photos via bluetooth to a paired device from i mac & vica versa ?

    bluetooth is a wide collection of what they called bluetooth profiles
    both devices have to support the bluetooth profile in question for it to work
    here is a list of the typical bluetooth profiles
    http://en.wikipedia.org/wiki/Bluetooth_profile
    if the paired device is an ios device here is the list of bluetooth profiles ios devices support
    http://support.apple.com/kb/HT3647
    otherwise
    http://support.apple.com/kb/PH3901

  • How do you prevent pages on iPad from skipping lines in a letter format?

    I have copied my own data into a letter template. Whenever I try to add the recipients address, pages will skip a line between the street address and the city and state. This creates an out of place space like so:
    12345 fake street
    Baltimore MD
    When I press back space I get some thing that looks like this:
    12345 fake street Baltimore MD
    How can you get the city and state on the next line?
    Thanks!

    Your seeing the consequence of a tightened "security sand box". It is hard-wired in each installed Adobe Reader/Acrobat that is updated.

  • TS4196 when I send Imessage to someone with iphone, there had received 2 message.  one from my phone No:  and  other one from my E-mail  apple ID   why is that happen

    hello
    I just install mountain lion  I try to send imessage from my MBP  , every time i send the imessage to someone iphone
    they received 2 mesage from me    one from my mobile number  and the other from the my email addres  apple ID
    can you tell me what is appening or how can I fix it  so only one message
    thanks

    Go to Settings/General/Reset and choose Reset All Content and Settings. This will erase everything on the iPhone and allow you to set it up again as new with the proper Apple ID.

  • How do you turn off the passcode from iphone 3gs?? I do not want to get prompted every time I turn on my phone!!!!

    How do you turn off the passcode feature from iphone 3GS?? I do not want to get prompted every time I turn on my phone.

    Settings > General > Passcode Lock
    You're going to really regret this if you ever lose your iPhone.

  • How do you send by secure ftp from SAP R/3 4.6C on iseries

    We have been using the SAP Standard program, RSFTP002, to ftp files to remote servers for many years. We have now had a requirement to send via secure ftp. We are using R/3 4.6C. Unfortunatley this is not a straight forward change and it seems we may need to install some client software to enable this.
    I have searched for any SAP notes and in several user groups but have not been too sucessful.
    Has anyone ever set this up before? What client software did you use?
    Any pointers / advice on this would be much appreciated.
    Many thanks,
    Steven

    Further to my initial post, I have now discovered that there are additional options on the ftp command on iseries, so I am hoping if I can perform this manaully, then a CL called from SAP would allow me to resolve this challenge.
    I am trying to use the command below but this will use the port 990.
    FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(SECURE) SECCNN(*SSL)
    The vendor is requesting that we use port 443 for secure ftp with SSL and even specifying this in the command as below still does not work. It seems to me there may be an issue at the receiving end. Port 443 is normally used for https so not sure whether specifying this port could cause issues. The resultant error is below.
    FTP RMTSYS(INTNETADR) INTNETADR('*.*.*.*') PORT(443) SECCNN(SSL)
    Connecting to remote host 62.39.53.181 using port 443.  
    No response from remote host; all connections closed.
    Any other comments would be welcomed.
    Many thanks,
    Steven

  • How do I receive texts on ipad from iphone after resetting apple id?

    I had to change my apple ID password.  I use to get texts from my cell phone number only on the ipad.  Now it does not show that as an option - only the email address associated with the apple id.  How do I get the cell phone number ONLY option back?  What am I missing?

    Hello rjrovato,
    I understand you are wishing to associate your Phone Number with your Apple ID. The following article outlines how to do so:
    iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Additional information on choose your Send & Receive addresses can be found in this article:
    iOS: Using Messages
    http://support.apple.com/kb/HT3529
    Thanks,
    Matt M.

  • How do I sync iMessages between iPad and iPhone on iOS 6?

    Haven't found anything online that was helpful as most of the references pertained to older iOS version or not the iPhone 5.

    Hello Kenny,
    Thank you for your question.  Deleting messages on one device will not delete the message on your other devices, but you can choose to disable iMessage or unlink your phone number. 
    You can disable iMessage on your iPad by going to Settings > Messages.
    iPad User Guide - Messages settings
    http://help.apple.com/ipad/7/#/iPad99acb5bb
    Alternatively, you can unlink your phone number from your Apple ID on your iPhone if you would only like to receive messages that are sent to your Apple ID on your iPad:
    Unlink a phone number
    To remove a phone number from an Apple ID, sign out of FaceTime and Messages on your iPhone:
    Settings > Messages > Send & Receive. Tap your Apple ID, then tap Sign Out.
    Settings > FaceTime. Tap your Apple ID, then tap Sign Out.
    This should remove your phone number from other devices using the same Apple ID with FaceTime and Messages. If the phone number is still available on other devices after you sign out of FaceTime and iMessage on the iPhone, you may need to sign out of iMessage and FaceTime on all your devices, then sign in to FaceTime and Messages again on devices you want to use.
    Note: If you no longer have access to the iPhone that is using the number you want to remove, reset your Apple ID password.
    You can find the full article here:
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do you send email directly to an iphone?

    I found this, but it appears to be using the SMS on the phone.
    [email protected]
    Is there a way to not use SMS, and just send the email directly to the phone?
    Thanks

    Sending email to an iPhone is, for all practical purposes, the same as sending it to a computer. You'll need an email account of some variety. The phone number email is for SMS, as you already discovered.

  • How do you remove non synced music from iphone 6?

    I want to remove some music from my phone but not delete it permanently from my account. I am trying to remove 1 song that I purchased on iTunes listed and the U2 album. Also  if possible I would also like to know if there is a way to disable auto play when I connect the phone to my car via the USB cable. I don't always want to listen to whats loaded to iTunes on the phone.
    Here is what I have tried so far:
    I have "Show all music" set to off
    Under usage I don't see music or all music
    I am not syncing any music with iTunes
    I have tried long pressing, swiping left, right etc. no change
    No option to choose edit then delete
    iOS version: 8.3 (12F70)

    in settings > itunes and app store make sure music is off under "show all"
    you can delete individual songs as well by sliding them to the left and hitting the delete button

  • Unable to send iMessage to husband's iPhone.

    iPhone 4s
    Suddenly unable to send iMessages to husband's iPhone. I get a message: 'Not delivered'.
    Only change is my Apple password change yesterday.
    How can we get iMessage to work between our iPhones again?

    Go to message settings and check make sure set up is correct.
    bsydd uk

  • How do you send pics from iPad?

    How do you send pics from iPad? I've tried to use the photos icon at the bottom, select the pics, and enter the email address. Problem is they never show up in the email. Any thoughts? I've also tried Pages app and a few others with the same result.

    I discussed the problem with Melissa at Apple. We tried reset, then we found about 50 attempts to email pics from Photos, stuck in Outbox. Deleted all of them, and we were able to send pic from Photos. Next day the problem was back, and emptying Outbox does not fix. Have not tried renewing account yet, worried about losing Inbox stuff.

Maybe you are looking for

  • Maverick 10.9.2 upgrade facetime camera not working any more

    Hei After upgrading to maverick 10.9.2 on my iMac 2009, the camera was not found in Facetime and all other products using the camera, like skype. I phoned apple support, but the guy told me that the camera was defect or I had to re-installed maverick

  • Problems with re-installing Snow Leopard.

    I'm trying to reset my macbook pro to factory settings, but when loading the Snow leopard CD the screen dims and a "Turn off your computer" message comes up, canceling the procedure. How do i fix this/reset my mac in another way? (As a side note, the

  • Using Dynamic configuration

    I have BPM in my scenario with two transformation steps one after the other...what I am trying to do is.. in first tranformation , I use Mapping Lookup API to fetch a value from RFC and I want to refer this same value in the transformation step 2. wh

  • How to add a checkbox to an ALV in WDA?

    Hiya, I need a table with a column as a checkbox within my web dynpro. So I created a structure in the context, where the column for the checkbox is setup as type WDY_BOOLEAN: Unfortunately in the ALV it appears as a non-editable checkbox: Anyone kno

  • FR Movies arrangement (iTunes vs Movies folder)

    Front Row lists all Movies from my iTunes Library first and then the movies in my structured folders from inside my Movies folder at the bottom of the list. This is really annoying, because my movies in iTunes are low quality (for my iPod only), whic