How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

Similar Messages

After downloading and installing the 64-bit version of iTunes for Windows I get a "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone to synch it I get a message that says that I don't the 64-bit version??

After downloading the 64-bit version of iTunes on my Windows 7 machine I get the "Congratulations, you've successfully installed iTunes" message. However, when I plug in my iPhone I get an error message that says, in part, "...the required software is not installed. Run the installer to remove iTunes, then install the 64-bit version of iTunes". I've been at this for hours, carefully deleting all Apple software (Apple Mobile Support, Quicktime, etc. and before each attempt to install the 64-bit version from Apple ( no third parties). Same result each time!!! Any ideas????

Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, does your device connect without that message now?

Cannot connect to itunes because it was passcode locked. You must enter the passcode on your iphone before you can access itune

I have my iphone to recovery mode and asking my password. It doesnt showing somewhere to put it. I need to back up my photos and sms is there any way?

If you can't figure out the password, you'll need to put your phone in DFU mode (search google for instructions) and restore as NEW.

Is it possable to transfer an incoming call on your Iphone, once you have answered it?

After receiving a call is it possible to transfer the call and hang up without disconnecting the call and the transfer location?

{color:#000080}Read the documentation for javax.microedition.midlet.MIDlet.platformRequest(String URL), particularly the paragraph related to tel:<number>.
Note that
-- on some devices the call may be placed only after the application is closed.
-- pauses during dialing are not relevant in some telephony services.
-- The user will be asked for permission before any call is placed.
db{color}

Play pre-recorded message

Hello,
I'm trying to set up a number such that when a caller calls the number, a pre-recorded message gets played. The caller will not be able to leave a message/voicemail on this number though. Here are the steps:
1. Caller dials number
2. Caller listens to pre-recorded message
3. Caller hangs up the phone
Is the above doable with Skype? If so, how?
Thanks!

You can try the PrettyMay Call Center for Skype which can do what you want, learn more at:
http://www.prettymay.net
Want to record Skype calls, check out at:
hereandhere

Pre-recorded message then hangup

Hello,
I am looking at one of our numbers and would like to have the ability to set a recorded message to play when the number is called. Then at the end of the recorded message to hand up.
Is there a way to do this from Call Manager 7? Or will I have to push it through to UCCX7?
Thanks
Trevor.

If you just need a message to be played then you could potentially do this via voicemail as well. If you have Unity or Unity Connection, you could configure a call handler (does not require a license) or mailbox for the DN and call forward all to VM. Record the appropriate greeting and set the after greeting action to hang up. When you do this, the call will be forwarded to VM where the greeting is played and then Unity/Unity Connection will immediately disconnect after the greeting.
You won't be able to do this natively with CUCM. IMO, this option is probably the easiest.
Hailey
Please rate helpful posts!

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

How do I set up a text message group on iphone

How do I set up a text message group on iphone

Go into messages, then click the icon at the top right to create a new message, then click the plus sign to add the contacts you want to text.
Is that what your asking?

How can I set it to delete messages off my server after they download?

How can I set it to delete messages off my server after they download?

IMAP email is server based. The messages stay on the server and just view them remotely with an email client like Thunderbird. If you want to keep a copy on your computer you need to move a copy of the email message to a folder under Local Folders. If you delete the message off the server, it is going to be gone otherwise.
The delete from the server option is a POP email server. It does not apply with IMAP email.

How do I set up an away message on my Iphone

I am going away on vacation my I phone 3 does not work in Europe how do I set up an away message for the phone.

if your asking about voice calls you'd have to set someting up yourself on voicemail
if your asking about email then you don't, out of office notifications are usually configured and managed on the mail server itself, usually via http
There are some apps that can configure out off office, they are managing the out of office on the mail server
iOS mail has no prevision for setting away messages
if it's a company mail server check with your IT department. if your using your ISP's mail server check with them if they offer vacation notification or out of office
Wifi will still work in Europe regardless of whatever cellphone standard your phone uses

How Do I Add A Pre-recorded Voice Over to an iMovie Project?

I have an audio file with the voice over I want to add to my movie project (which has an insturmental music track I want to duck during the voice over). How can I add this pre-recorded voice over track to my project?

You can drag in the voiceover file and drop it on top of the clip where you want it to start. It does not have to be perfectly placed, because you can fine tune it later by dragging.
I would suggest putting your voiceover file in iTunes and dragging in from the music browser, but it also works to drag in from the Finder. If you drag in from the Finder, you must take care not to move it later, or the iMovie Project will not be able to find it.

How can I set a password for firefox so that everyone have to enter the password before executing firefox

My younger sister executed my firefox just at this afternoon(she originally use IE), and she saw something that can't be seen. How can I set a password for firefox so that everyone have to enter the password before executing firefox?

Also see this for an English version of Profile Password:
*Profile Password: http://nic-nac-project.de/~kaosmos/profilepassword-en.html#PPF
It is an extension to protect the profile with a password, but being an extension that protection can easily be bypassed by starting Firefox in [[Safe mode]].<br />
So do not rely on it.<br />
If you want to protect content then you have to use methods supported by the OS like a separate user account with a password or an encrypted file system.

How can i set a song from my music library to a ringtone for my iphone 4s

how can i set a song from my music library to a ringtone for my iphone 4s?

The procedure is the following:-
*right click the song on itunes and click get info.
*under the option, check in the start time and end time- This is the exactly which part of the song you want to make your ringtone.
*Click Ok.
* Again right click in the same song and click the CREATE AAC VERSION
* Now you can see the same two song. if you have made the short length in step 2, lenght will be different.and this will be in (.m4a) format. and if you dont see on itunes you can search the name on finder. you will find both files.
* Now you try to change the format (.m4a) to (.m4r), you just delete a and add r and press enter bottom. and conform it.
*Now you add this files to the ringtone/tones on itunes which is located on the left side bar of itunes.
*make sure under the preference of your itunes under the general the tones section is checked in.
*go to your device on itunes. Under the tones check in sync tones. You can Sync all tones or the particular tones which you want.
*Now this tone is on your iphone. You can change your ringtone through setting>sound>ringtone and choose the particular one.

How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

Last night, when I played my playlist songs with iTunes Genius, my iTunes, with one of my playlists selected, and set on "Shuffle On," "Genius Shuffle On, "Genius On," "Match On," and "Play," played selections from all of my songs in my playlist. Today, my iTunes Genius went back to the same problem it was giving me before last night. My iTunes Genius has been playing selections from just a few of my playlist albums. How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

Similar Messages

Maybe you are looking for