How do you set different volumes on dual mono?

I'm missing something, I'm sure, right? I normally record a mic to a channel and NAT sound to another channel - so say for example, I might mic up a presenter on stage, and take that feed into Channel 1 (external source) and leave my on-cam mic set to internal for Channel 2 - so I can bring that up in the edit for either Q&A from the audience or just to swell applause. In FCP7 audio tracks showed dual mono as two tracks with individual overlays so you could adjust each channel as needed. In X I only see a single track of dual audio, and in the information box, I can check or uncheck the channel I want - and a lot of times, that's good enough, but how do you keep both channels and adjust the volume of each one seperately?

Tom - thank you. So to make sure I am clear though, (my audio was always dual mono, and in the inspector they are represented as two seperate tracks where I have the option to check or uncheck each one), but the timeline, they appear as a single track and in your solution (which worked) you are saying to break apart (as in make them seperate from each other and able to fall out of sync? that kind of break apart?) it still worked I was able to see two tracks, similar to FCP7 - and I can adjust volume seperately on each channel, but are they no longer linked in terms of sync? If I am understanding correctly, then is that to say there is no way to keep their connection to the video they belong to and also still see each channel and adjust each channel independently of the other?

Similar Messages

How do you set up the tracks, Dual Layer project

I have a dual layer disc and project.
The breakpoint will be in the middle of one of the programms. But i don't want that.
Now i want to had a 'hidden' track on layer 0 (so it becomes larger than layer 1)
But how does dvdsp4 calculate whitch tracks goes on what layer?
I've tried to put the hidden track in the outline between track 1 and track 2. But watching dvdsp4 muxing he doesn't put the hidding track between track 1 and 2, but totally at the end.
p.s. the hidden means it doens't have a button on the menu, so it isn't acceseble for people. it's just there to make layer 0 larger than layer 1.

Since you are using DVD SP 4 go to the VTS view in the outline tab. (Press F3 Key, click on outline view, and you will icon at top right in that section [still of left side of the screen] where you can toggle the screen from the list you see to somehting that will list VTS) A pciture of what I am describing is on Pg 589 of the PDF manual.
Drag the "Hidden" so that it is between the VTS for track 1 andd tracks2 (and make sure that there are markers on it (a few at least) so that (hopefully) there should be a layer break in there.

How do you set different sleep times for different days?

Energy Saver --> Schedule allows you to schedule start/wake/sleep/shut down, but it doesn't provide very fine grained control. Is there a way to set the computer to sleep or shut down at different times on different days, to wake only on particular days, etc.?

AFAIK, Energy Saver doesn't provide the granularity that you're seeking. Launch the Terminal app, copy & paste this command into the window that pops up, hit the return key, and peruse the underlying documentation for the power management setup process:
man pmset | cat

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

For the ipod on my phone, each song has a different volume. How do you set it so all the songs have the same volume?

Copy everything from your old computer, or your backup copy of your old computer, to your new one.

How do you set up two different ipads on one computer ?

I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system. How do you set up two different uses on one computer.
Thanks,
Dave

Other options not covered in the article:
1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

How do you set up a different ipad on same computer with different itunes library

I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer. When I open up itunes with his apple ID, I continue to get my itunes library information. I don't want to mix my information with his information. How do you set up a different i pad/itunes on the same computer? What I need to do is update the version of his i pad as his i pad is version 4.2.1. Thank you

Create a new Windows user account on the computer.
(86398)

How do you set up two different icloud accounts on the same itunes account?

How do you set up two different icloud accounts on the same itunes account?

Don't know what you mean.
Please explain.

Set different volumes?

I want to set different volumes for ringer, media, message , alarms etc as I did with my HTC Desire. How can I do it on the Iphone 5?
I have my ringer set to max, but at 2am when I get an email, I get blown out of bed with the notification. Surely Apple does't have a one volume fits all policy, I must be missing a setting somewhere. Please help

Tom - thank you. So to make sure I am clear though, (my audio was always dual mono, and in the inspector they are represented as two seperate tracks where I have the option to check or uncheck each one), but the timeline, they appear as a single track and in your solution (which worked) you are saying to break apart (as in make them seperate from each other and able to fall out of sync? that kind of break apart?) it still worked I was able to see two tracks, similar to FCP7 - and I can adjust volume seperately on each channel, but are they no longer linked in terms of sync? If I am understanding correctly, then is that to say there is no way to keep their connection to the video they belong to and also still see each channel and adjust each channel independently of the other?

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

How do you set up the passkey between the Mac & Palm?

Hi all,
I need help with a couple of things relating to bluetooth and Mac;
a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
thanks
iBook 1.2GHz Mac OS X (10.3.9)

Palm has this to say about the issue:
'Unable to initiate HotSync operation because the port is in use by another application.'
This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
Unable to initiate HotSync operation because the port is in use by another application.
Why does this happen?
Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
What should I do?
If you see this error, here's how to correct the issue:
1. Launch the HotSync application on your handheld.
2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
4. Do this every time you wish to synchronize using Cable/Cradle.
5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
http://www.palm.com/us/support/macintosh

How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
This pritner is fully compatible with Airplay per HP site
My dad has no PC
He knows the router passcode.
What is the process?
Will the HP printer to be purchased shortly work out of the box w/no drivers
How do you set the printer up to work on the iPad?

Richard-
I have the HP D110 AirPrint printer. As I recall, it was configured in Ad Hoc network mode when first received. It was necessary to set it up to access my WiFi router before I could use it with the internet connection. Then, as part of the setup process, it downloaded the latest firmware update from HP. This was all done from the printer control panel, and no PC was needed.
As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer. Go ahead and try it, it may work. If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
By now, you should realize that a PC is needed to update the iPad. I assume your Dad visits you when he needs use of a PC.
Fred

Is there a way to set different volumes for Alerts, phone ringing

I would like to be able to set different volumes for Alerts, Phone ringing, and incomming mail. Is this possible?

No, not at this time. The alerts and phone ringing are all the same. You can provide feedback to Apple if you would like to let them know you would like to see this feature implemented by going to http://www.apple.com/feedback/iphone.html

How do you set different volumes on dual mono?

Similar Messages

Maybe you are looking for