How do you set iPhoto to see photos stored on a Time Capsule?

I have iphoto11 and cannot see how to set it up so that I can store my photos on a Time Capsule or another network drive.  I am not asking to back up the photos, but rather have them stored centrally so that it does not fill up my HDD on my MacBook and also alow me to access them from other computers.

Launch it with the Option key held down and create a new library there or choose an existing library on it.
(62994)

Similar Messages

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How can I set up a wi-fi network, using one time capsule and two airport express

    how can I set up a wi-fi network, using one time capsule and two airport express ?
    The time capsule is near the Mac. ok
    The first Airport is on the corridor, ok, works well and the App on the iPad signals so, ok
    But when I plug the next Airport on another room nearby nothing happens, and signals disconected ....
    is the signal so weak that is not able to go to ono room to the other ?

    Well, even if you have the first express set up to extend the network, the second express can only extend from the TimeCapsule.
    Maybe you got walls of sheetrook in the way, or kitchen/bathroom tiles, etc, dampening the signal rapidly.

  • How do i set up a wireless access point with ny time capsule

    I am using a new Airport Extreme and want to utilize my older TC to create a wireless access point or maybe an aditional router using the same newtwork.  What are the steps to set this up?
    Thanks
    Alamo

    You will first need to perform a Factory Default Reset on the Time Capsule.
    Resetting an AirPort Base Station or Time Capsule FAQ
    Then, temporarily locate it in close proximity (same room or nearby) to the AirPort Extreme.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click the tab in the upper left hand corner of the AirPort Utility window that reads Other AirPort Base Stations (1), then click the Time Capsule
    AirPort Utility will take a moment or two to analyze your network, then announce that the TC will be configured to extend your wireless network.
    Enter a name for the TC (you can use the same device name that you used before if you wish) and click Next.
    AirPort Utility will take a another minute or two to configure the TC and then tell you that the setup is complete. Click Done
    At this point, power down the TC and move it to a location that is approximately half the distance from the AirPort Extreme and the area that needs more wireless coverage.....to give the TC a good strong signal to "extend"
    Power up the TC and wait for the green light and then you are all set.

  • How do I backup my files that are stored on my time capsule?

    I use my time capsule as network storage (ie, iTunes library, iPhoto library, and lots of personal files). This way my wife and I can access these files from our individual laptops. Is there a good solution to automatically back these files up? I know Mozy does not support backing up of shared volumes. Does anyone have any suggestions?

    Bungalow, welcome to the discussions!
    Take a look at the Archive function to see if this might do what you want.
    Hard Drive > Applications > Utilities > AirPort Utility > Manual Setup > Disks (icon at the top of the pane).
    Please post back on your findings.

  • How do you enhance a bunch of photos at the same time in iPhoto?

    I've read a similar question posted on the communites and there were multiple solutions posted.  The question was posted a couple years ago so I am hoping technology has evolved and there is a correct answer out there.  The multiple answers I've read range from:
    1.) just click on all the photos and then right-click; 2.) buy iPhoto Batch Enhancer 3 from feroxsoft.com; 3.) that it is not possible, each photo must be individually enhanced
    Which is right???  Please help, thanks!

    No 2.
    Regards
    TD

  • How do you set a song length to match a specific time?

    Example:
    I have a five minute montage video and I'd like to export out a melody to match the five minute video without going through the process of manually building a song.
    This app may be too powerful for what I'm trying to do.
    Tips?

    Did you ever get an answer to your question?

  • How do you set up a simple web page to upload photos from iMac?

    How do you set up a web page on the iMac so you can upload photos and maybe even video from iPhoto to it?

    You really do not need to create your own web page or site to upload photos to the web.
    There are many sites that can host photos for free or very cheaply per year.
    You create your own user location on these sites.
    Do a search for either web hosting sites or photo hosting sites.
    Here are a few you can look at to get you started.
    There's Apple's own iCloud
    Facebook
    Image Shack
    Photobucket
    Picasa
    Flickr
    To name a few.
    Do a search and see which photo uploading site works best for you .

  • How do you set the setting in iPhoto to ask before deleting a picture?

    How do you set the setting in iPhoto to ask before deleting a picture?

    If you delete a picture, it sends it to iPhoto trash (left column), there you can permently delete using the empty trash with the icon in the upper right corner. It will come up with a warning if you want tp permently delete trash (photos).  It the iPhoto trash you can drag them back out, once you empty the trash, they are gone.
    You can also go to finder preferences>advanced, and unclick secyre empty trash, and make sure show warning before empting trash is clicked.

  • How can I get iPhoto to see the edited iPhone 4s photo?

    I have a new iPhone 4s.  I take a picture. I edit it and save it to the iPhone.  Then, I sync my phone with my Mac, open iPhoto.  Only the original photos appear, not the one I edited and saved.  Yet, if I e-mail the photo to myself, I can see the edited version.  So, how do I get iPhoto to see the edited version.

    8 MP is the resolution of the camera sensor.  Images are compressed when stored so quite a bit smaller.  The compression ratio depends on the level of detail in the image.

  • TA24960 How do you set a user photo from your photo library?

    How do you set a user photo from your photo library?

    What version of OS X are you running?

  • How do you set up to back up iPad notes in iCloud?  I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

    How do you set up to back up iPad notes in iCloud?  I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

    You'll find your notes under Mail in iCloud. There's a separate folder on the left that's labeled notes so you can access them anywhere. And your me.com account will have the same password as your Apple ID (in fact, you can log into iCloud with just your Apple ID, as the two accounts are permanently linked).

  • How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?

    How do you set a Canon Pixma MP280 All-in-One Photo Printer , to mirror image for shirt transfers ?  Im really having  hard time so any help needed . 

    Hello. When printing on T-Shirt Transfer media, please change the Media Type setting to T-Shirt Transfer before printing.  This can be specified in the print menu of your software. If you need assistance with locating the Media Type options, please tell us what version of Windows or Mac OSX is on your computer. This didn't answer your question or issue? Find more help at Contact Us.  

  • How do you Set the Clo

    How do you setup the clock inside the Zen Micro? IT is located in the System or Extra's area, i forgot which, and it tells along with the time, the date. AS i ask before, how do you set it up?

    blegs38552 wrote:
    I do not see a way in Zen Nucri Photo Media Explorer to synch the payer to my coputer. I have the Zen Micro Photo MP3 player with the latest firmware reelase. I clicked on the double gears, but do not see the option to use system time.
    Hmmm, me neither. :smileyindifferent:
    It works for my Zen Micro on my old computer, but not for my MicroPhoto on my newer computers.
    Anyone have a tip for synching the MicroPhoto's clock to the computer's?

Maybe you are looking for

  • MSS UCF_AcroForm error displayed when trying to display form in PCR

    I receive a pop-up UCF_AcroForm error when trying to display a PCR form. I believe it is a configuration problem. I wonder if anyone has ever received this type of error before, and if yes, how was it solved. Thank you. Edited by: Emmanuel Filosi on

  • IMac G5 - Can't find accurate tech info

    Hello, Forum; My G5 iMac developed a problem last week where it tries to start, the screen stays dark (no activity what so ever) and the fan goes into overdrive. All conventional work-arounds have had no effect (restarting from DVD drive to reinstall

  • Approval query to not allow invoicing if no freight entered

    Hi, I have the following query which generates an "internal error" message but then does not trigger the approval process. select Distinct 'True' From OINV T0  INNER JOIN INV3 T1 ON  T0.DocEntry = T1.DocEntry WHERE T0.OINV.U_Ship = 'Prepaid & Billed'

  • Old G5 Updates

    I have a Powermac G5 (2.3 GHz processor ) and I want to add Word so I can open .doc documents. Office 2011 for Mac is available but needs OS 10.6.8 or higher to run it. I am running OS 10.4 .11. Can I upgrade the OS or should I look for an older Offi

  • Spa504g xml caller id

    Hello, I have an cisco spa504g voip phone with a configration to connect a xml directory. This works good, but the caller id is not showing and the file with the directory in it is then not called. Is is possible to use this directory to get an calle