How do you set lens adjustment universally

I just downloaded LR 3.2
I am going through my photos.  do I need to take each photo and go to development and then select the lens used or is there a way to change the preferences so this will just happen.
also, does the program automatically somewhat reduce noise?
i shoot raw
thanks
diana

Diana,
Sure.  I think it's pretty easy.  You might want to consider changing the default develop settings to turn on lens corrections for all new photos.
In general, you can change Lightroom develop defaults in the Develop module from the Develop menu ("Set Default Settings...").  Just be careful, because any other settings you've changed will also be stored permanently as defaults.  It might be a good idea to reset your current photo to Adobe defaults, then only make the changes you want to become new defaults, before you use Set Default Settings.
So to get the Lens Corrections to apply to all photos by default, just click "Enable Profile Corrections" in the Lens Corrections panel of the Develop Module, and then use Set Default Settings to remember this permanently.  I believe this will only automatically apply to photos you import subsequently.
How to apply this change to the photos which are already in your library is beyond the scope of this reply :-)
Hope this helps.

Similar Messages

  • How do you set the duration for multiple stills in iMovie 2013?

    How do you set the duration for multiple stills in iMovie 2013?
    Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
    Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
    REALLY??!!

    ...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
    Because often people are animating to words or beats in the music.  Music is rarely performed with a computer-precise beat and tempo.  Musicians aren't robots: they swing the beat sometimes.  They use rubato.  They change tempo.  They change time signatures.  As a result, you have to FIND those words and beats.  It's not a situation where you can say, "There!  I've found the duration of one beat!  Now it's easy to find the rest of them!" 
    If you try it, you will be very disappointed.
    Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out.  You'll see that it's trial-and-error: what's the point where it becomes inaudible?  It depends on how high your speakers are turned up.  You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume.  You might say, "Hey!  The music ends before the layer ends!"...  but you KNOW you set the layer's out point when the audio file goes silent.
    AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
    I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures.  Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works.  For true accuracy, you need  find the timings yourself. 
    If you want something simpler, try a different application. But be prepared for lower level of accuracy.

  • How do you set the alert time to default to a set amount of time in the calendar?

    How do you set a default alert time in my calendar so I don't have to set it every time?

    Go iCal Preferences/General and click the default alert tick box at the bottom. You can then adjust the amount of minutes before the event for the alarm. NB. ticking the tickbox means you get an alarm for every entry.

  • How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

    unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
    i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
    unplug the at&t box for a minute and plug it back in
    factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
    connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
    create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
    login to your at&t router and disable wifi on it
    add new clients to the new wifi network, and point your Macs to the time machine for backups

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

    How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

    To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
    http://lilybiri.posterous.com/question-question-slides-in-captivate
    http://lilybiri.posterous.com/question-question-slides-part-2
    Lilybiri

  • How do you Set up a Family Pack sub-account

    how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
    please help
    Denis

    Thanks Shepart
    when i activated the account i ticked the upgrade button, should i have ticked the new account button?
    anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
    Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
    i think i hit a brick wall !!
    Cheers
    Denis

  • How do you set up separate facetime accounts under one apple id

    how do you set up separate facetime accounts under one apple id

    This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    Hope this helped!

  • How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

    how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

    Are your contacts not on your computer?

  • How do you set up two different ipads on one computer ?

    I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system.  How do you set up two different uses on one computer.
    Thanks,
    Dave

    Other options not covered in the article:
    1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
    2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

  • How do you set NLS_LANG environment variable in report builder

    How do you set up the reports builder environment to display foreign fonts.
    So far what I read makes me think that in report builder I have to set the NLS_LANG environment variable .
    If anyone has done this is that true and if so how.
    Also the languages I want to use are the following.
    Armenian
    Cambodian
    Chinese
    Russian
    Tagalog
    Vietnamese
    How do I find the NLS_LANG environment variables for these.
    Where I am at now+
    I have to set the DEVELOPER NLS LANG. I see the NLS LANG in the registry and I guess I have to add the DEVELOPER NLS LANG.
    Now I am searching for syntax. If anyone knows the syntax for those languages please let me know and how do I set more than 1 at a time.
    Howard
    Edited by: csphard on Apr 14, 2010 5:17 PM
    Edited by: csphard on Apr 14, 2010 5:22 PM
    Edited by: csphard on Apr 15, 2010 9:02 AM

    Hello Howard,
    Check out the following link here you can find your desired NLS parameters.
    http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
    And about the NLS_LANG for developer why you want to create for developer. Its is already there in REGISTRY. Just seaching in developer registry you can find there.
    how do I set more than 1 at a time.
    You can set only one NLS_LANG parameter at a time.
    -Ammad
    Edited by: Ammad Ahmed on Apr 15, 2010 8:52 PM

  • How do you set up a different ipad on same computer with different itunes library

    I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer.  When I open up itunes with his apple ID, I continue to get my itunes library information.  I don't want to mix my information with his information.  How do you set up a different i pad/itunes on the same computer?  What I need to do is update the version of his i pad as his i pad is version 4.2.1.  Thank you

    Create a new Windows user account on the computer.
    (86398)

  • How to you set up a POP email account on iPhone 5S?

    How do you set up a POP emial account on iPhone 5S.  It only gives me an option for IMAP and I need POP
    THANKS

    Turn it on airplane mode.  Then set up you new account with all of your credentials.  Save, once it allows it.  Turn Airplane mode off, and then go back and select POP.

  • How do you set up iTunes 10.5 on a new computer?, How do you set up iTunes 10.5 on a new computer?

    I have a new computer  with Windows 7, Outlook and I use iTunes with an Apple iPhone 4 and a iPad. My devices have iOS5. How do you set up iTunes 10.5 on a new computer and sync these devices. I have already downloaded iTunes 10.5 on my computer. Also, I use MobileMe. Thanks for your help. LCP

    Thank you for your response. I have all of my files, etc. and am sitting here on the old computer. I just wasn't sure if I should simply save the iTunes program I am using or insall a new version.
    After I get iTunes onto my new computer do I authorize the new computer before I plug in my IPod or after?
    I'm sorry I didn't point out that I had all of my files available. For some reason, working with iTunes and my iPod make me nervous.
    Thanks again.
    Rustyglo

  • How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

    How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

    In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
    How to sync

Maybe you are looking for