How Do You Set Mail To 'Manual' ?

Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?

I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........

Similar Messages

How do you set mail to be left on the server.

When you receive mail on the iPhone how do you specify that you want the mail to be left on the server? That way you can also pick it up on your computer. This can be handy if a more detailed exchange is required. Thanks,

Go to Settings > Mail.
Select your POP account.
Select the Advanced button for the account settings.
Under Incoming Settings at Delete from server, the options are:
Never
Seven days
When removed from Inbox
I believe the default setting when creating a POP account with the iPhone's Mail client is Never.

How do you set Mail to mark a message as "read" only when you open it

I'm using Apple Mail. Works great, but I have one big issue I can't figure out. I want my messages to be marked as read ONLY if I double click or actually physically open the message....not when I click it once with the mouse or if it gets selected in the inbox message pane. The way it's set up, all my mail is read the minute I click on it. This is extremely annoying and I can't find anywhere where you can set this preference. HELP.
does this make sense to anybody??
OSX Tiger 10.4.7

The OP's question makes sense and Scott's comment is correct. You can have Mail setup so that there is the list of folders on the left, the list of emails in that folder in the top right hand side and the selected message in the pane below that on the lower right hand side. In that case clicking on a message in the list of messages will display it below and Mail will deem you to have read it. On the other hand if you drag down the divider and get rid of the pane in which the message displays then selecting it does not mark it read. Double-clicking it should bring it up in a new window and cause the message to be marked read.
Basically Mail marks the message read when it has displayed (some of) the message in some place (ie a separate window or the lower right hand side pane) where you could have read it
Michael

How do you add a video on i-pod after you set it to manual

How do you add a video on i-pod after you set it to manual and not erase a ton of stuff in the process?
Thanks

after choosing the manually manage your songs you will not be able to add videos by clicking "update". all you going to do.. after converting videos compatible to ipod video, click your ipod on the left portion of the i tunes it will immediately show your songs from your ipod then drag the selected video from its folder to your i tunes just like adding songs to your ipod

How do you set-up a hotmail email address in mail

how do you set-up a hotmail email address in mail?
I cant seem to add it. any ideas why it cant connect to the server? what server address should i be using?
regards
Brendon

Hi bmuur,
I also had the same problem.
I clicked Microsoft Exchange and kept trying to add my hotmail account that way but it kept asking for a server address for it to work.
If you go into Internet Accounts and instead of clicking Microsoft Exchange scroll down to the bottom of the list and click Add Other Account...
It will ask what sort of account you want to be created and I selected Add Mail Account and clicked create.
Enter your full name, hotmail email address and password.
I then clicked create and it worked for me.
Hopefully this solves your problem.

How do you set up company e-mail to i phone

how do you set up company e-mail to i phone

That would depend on what kind of email system your company uses and what they will allow to access. Your best source of information would be the IT department.

HT201320 how do you set up and exchange account for google mail

how do you set up and exchange account for google mail

If it's a free gmail account, you don't. Google no longer permits free accounts to be set up using Exchange Active Sync. Only paid google apps accounts can be set up as Exchange accounts.

HT4898 how do you syn mail after moving to icloud

How do you syn mail after moving to iCloud?

Yes, you can use iCloud mail with OS X 10.6.8. However you need to enter the account details manually using the Mail Server Information

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

beatngu13
I made an account just to "like" your comment and say that you are a god among men.
I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
From the bottom of my heart, thank you!

How do you set a signiture!?

How do you set a signiture for messaging...? Not email!!!

There is no method to set a signature in Messages for the iPhone, only for Mail.

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

How do you set up to back up iPad notes in iCloud? I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

How do you set up to back up iPad notes in iCloud? I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

You'll find your notes under Mail in iCloud. There's a separate folder on the left that's labeled notes so you can access them anywhere. And your me.com account will have the same password as your Apple ID (in fact, you can log into iCloud with just your Apple ID, as the two accounts are permanently linked).

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

How do you get mail notifications to show up on the lockscreen

How do you get mail notifications to show up on the lockscreen ?

Go into settings
Notification center
Turn mail on and then set how and for which accounts you want it displayed.

How Do You Set Mail To 'Manual' ?

Similar Messages

Maybe you are looking for