How do you set the Date & Time on Zen V Pl

On the System menu I scroll down to Clock Settings. It gives me the options to view the?clock, put the?time in title, & the set the alarm. How do you?change the time & date?

cwilliam4,
Go to Extras -> Date and Time. Once you're inside, press and hold the Back button and you should have a list of additional options.
Jason

Similar Messages

How can i set the date time year to my i pod

how can i set the date time year to my i pod touch

Hello Theodora,
You can do this via your iPod's Settings application.
B-rock

HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

how do you set the airport time capsule as the primary base station rather than as a network client?

The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"?

How do I set the date/time on my Airport Express?

I am using an Apple Airport Express to connect to a wireless router in another part of the house. However, I am unable to set the date/time correctly and so the logs all start from Dec 13, 0hrs.
I have tried using an internet time server, but to no avail.
Any ideas?

Open AirPort Utility and click Manual Setup
Click the Base Station tab just under the row of icons
Settings for Time Zone and the option to Set Time Automatically are there
Click Update to save your new settings and restart the AirPort Express

How do you remove the date/time stamp from a photo before printing?

I have one group of photos in an event that have the date and time stamp on them. I don't know how to remove the date/time stamp before printing.

If you have your camera set to imprint the date/time on the photo you can not "remove it - it is a part of the photo - depending on the surounding photo you might be able to retouch it out
LN

How do you vary the Date/Time stamp format in File Adapters

In the receiver channel of the File Adapter where you specify the 'File Name Scheme', you do have the option of specifying a 'File Construction Mode' of 'Add Time Stamp'. How can you specify a different Date/Time stamp format ( eg MM/DD/YY vs YYYYMMDD vs MMDDYY, etc. ) without changing the Date/Time stamp for the entire SAP system? Also, can you control where the Date/Time stamp appears in the filename?

Hi,
There are many threads discussing the same issue. Go thro the following:
Dynamic file name (Date) in Receiver File Adapter
Receiver File Adapter - TimeStamp
Bhavesh's reply in above thread:
You can use Adapter Specific Identifiers and then change the file name in the mapping. Append the tiem stamp in the format that you want and so on.
Just use this code in an UDF,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String SourceFileName = conf.get(key);
java.text.SimpleDateFormat dateformat = new java.text.SimpleDateFormat( "yyyyMMdd" );
dateformat.format( new java.util.Date() );
String newfilename=SourceFileName+dateformat;
// change to new file name
conf.put(key, newfilename);
return "";
Regards,
P.Venkat

How do you set the alert time to default to a set amount of time in the calendar?

How do you set a default alert time in my calendar so I don't have to set it every time?

Go iCal Preferences/General and click the default alert tick box at the bottom. You can then adjust the amount of minutes before the event for the alarm. NB. ticking the tickbox means you get an alarm for every entry.

How can you set the ctxsvr time interval ?

I would like to know how can i set the time
inteval between each update of the Intermadia
indexes.
Thanks.

stop and restart ctxsrv on specified intervals.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Lombar vincent ([email protected]):
I'd like to use the ctxsrv utility, because i want automatic index rebuild.
But Is it possible to set the time interval
between each update?<HR></BLOCKQUOTE>
null

How do you set the date & prevent auto revert to current date?

Numbers 3.2. Macbook OS 10.9.3
I want to set a block of cells to a particular date (05/10/14) and then add in different times. But everytime I make a change to the default time (12:00 AM) in a specific cell, the date I initially set reverts back to the current date (05/29/14).
How can I prevent or work around this annoying date change issue? Thank you for any helpful tips you can provide.
Kind regards,
David.

Hello
I'd create separate columns for date and time input (formatted as text) and calculate date-time value in the third column. Something like this.
Table definitions are as follows.
A1    date (text)
A2    2014-05-10
A3    2014-05-10
A4    2014-05-10
A5    2014-05-10
A6    2014-05-10
A7    2014-05-10
B1    time (text)
B2    09:10
B3    10:20
B4    11:22
B5    12:20
B6    13:00
B7    14:00
C1     date-time
C2    =DATEVALUE(A2)+TIMEVALUE(B2)
C3    =DATEVALUE(A3)+TIMEVALUE(B3)
C4    =DATEVALUE(A4)+TIMEVALUE(B4)
C5    =DATEVALUE(A5)+TIMEVALUE(B5)
C6    =DATEVALUE(A6)+TIMEVALUE(B6)
C7    =DATEVALUE(A7)+TIMEVALUE(B7)
This way, there's no implicit interpretations on date and time input.
* The point is to format columns A and B as text.
Hope this may help,
H

How do you set up date time to show up on texts/msg

I upgraded to IOS 6, UNFORTUNTELY date, and time feature is not showing up on texts/msgs. i cant tell when a text was received or texted?

cwilliam4,
Go to Extras -> Date and Time. Once you're inside, press and hold the Back button and you should have a list of additional options.
Jason

How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

After the discovery reported above, I filed this report :
Bug ID# 10073038
Summary:
When Numbers is used on a system with decimal comma a csv file may be good AND wrong
Steps to Reproduce:
With Numbers v2, you introduced an interesting enhancement.
In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
This said.
(1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
(2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
Expected Results:
Every normally constituted user assume that in
case (1) he will get a perfectly built table
case (2) he will get every cells of a row in a single cell
Actual Results:
In fact you forgot the drag and drop way of use and in
case (1) every values separated by semi-colon are inserted in a single cell
case (2) values separated by comma are correctly spread in a table
isn’t it ridiculous ?
Regression:
Except looking in QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
or
to replace the commas by TABs and the decimal periods by commas
Notes:
While I am on this subject, I wish to make two proposals:
(1) It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
Doing that, dates would be imported correctly in every countries.
At this time, on an English system, you export as mm/dd/year.
If the doc is open on a system using the format dd/mm/year, the results will be odd.
On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
(2) It would be fine to add the format Tab Separated Values in the Export pane.
TSV + ISO date format would give documents opening flawlessly everywhere.
Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How do you set the amount of time the screen stays lite after your last use?

How do you set the amount of time the screen stays lite after your last use?

Settings>General>Auto-Lock.

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

How do I change the date/time of a dll created in LabVIEW without killing it

I use the LabVIEW (6.0.2 of course) Application builder to create a dll, and I cannot enter creation information, nor can I modify the date time property, which labVIEW does not properly set. I have tried to modify this information in Visual C++, but that destroys the dll because it wasn't compiled in VC++, and therefore isn't compatible.
If anyone knows how to correctly modify the date/time (and the checksum) without destroying the dll, I would be gratefull to know.
Thank you

Dear Sir,
I was browsing through MSDN in trying to find the info you are looking for and I step into this next file:
"Peering Inside the PE: A Tour of the Win32 Portable Executable File Format"
Which you can locate in the msdn.microsoft.com page by going to the search box and typing that title. The first result is that document. Also you may want to check the "imagehlp" file of the msdn library. This documents provides information on the DLL standard and functions.
Good luck!...
Nestor Sanchez
Applications Engineer
National Instruments
Nestor
National Instruments

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

How do you set the Date & Time on Zen V Pl

Similar Messages

Maybe you are looking for