How do you set up a MacBook Pro and a PC with one Airport Express?

I have a MacBook and my roommate has a PC and we're trying to set up my new Airport Express at our college so we can hook up our computers and printers to it. I had it so that my laptop worked fine, but hers would "connect" and not really have any internet connection at all. Class starts on Thursday, so help would be kindly appreciated!

I'm a great believer in the KISS principle.
Configuration is simple if you start from a factory default condition.  Connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

Similar Messages

  • How do I set up my MacBook Pro to print via wi-fi to my printer

    How do I set up my MacBook Pro to print via wi-fi to my printer?

    It is rather hard to know how to help you since, among other things, you didn't tell us what printer you own, what you've tried thus far, and what happened when you tried it. Your printer came with documentation and it may have even come with a disk that takes you through the process step by step. My first two suggestions are that you (1) make sure you know the password and SSID of your wireless router. You'll definitely need the password and you might need to know the router's ID name. (2) read and try to follow the instructions that came with your printer. In general, I've found that Canon and HP instructions and setup software are quite good while Brother wireless printers, at least in the past, have been rather flaky to set up (but work fine once that initial headache is dealt with).

  • How do i set up my macbook pro to use airplay on my apple tv

    How do i set up my macbook pro on airplay to show on my apple tv?

    http://store.apple.com/us/product/MB572Z/A

  • How do you iMessage from the MacBook Pro

    How do you iMessage from the MacBook Pro?

    Lord Of The Weirdos wrote:
    And if you don't use that computer often be prepared for the mountains of new notifications the next time you run it.  Especially if your like me and use your iPhone and iPad a lot for texting people.  Wish iMessage in ML would know what you read somewhere else like iPad and iPhone does
    I don't quite understand what you are saying? If i recieve and read an iMessage on the iPhone and then switch on my Mac, I don't get a notification about a new message, but that iMessage appears on the conversation.

  • How can i set up my macbook pro that the sent emails show up in the sent folder?

    How can i set up my macbook pro that the sent emails show up in the sent folder?

    look at the Preferences and open the "Mailbox Behavior"  maybe the sent mail is being stored on the server?
    I going to have this post moved to the "Mail" forum

  • How do you move iMovies from MacBook Pro to iMac?

    How do you move iMovies from MacBook Pro to iMac?  I started some projects on my MacBook Pro but would rather have the larger working area provided on the iMac large 27 inch screen. 

    Hi there rainyri!
    The easiest way for you to do this is to transfer the information to an external drive as an intermediary, then transfer the information from your drive to the internal drive on your iMac. We have an article that explains the steps for doing this, and it can be found here:
    iMovie '11: Copy or move a project to an external hard disk
    http://support.apple.com/kb/ph2289
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

    Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
    Click Time Machine
    Click Options
    Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
    The drive will be backed up on the next Time Machine pass
    Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

  • How do I synch my iPhone5, MacBook Pro and Apple TV so that my iTunes downloads appear automatically on all three devices?

    How do I synch my iPhone5, MacBook Pro and Apple TV so that my iTunes downloads appear automatically on all three devices?

    Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
    Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
    After this, do an update from the App Store.
    Thats all there is to it.
    For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
    Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
    There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

  • How to erase all data on macbook pro and reinstall operating system

    how to erase all data on macbook pro and reinstall operating system

    OS X Snow Leopard
    https://support.apple.com/en-us/HT3910
    http://www.thesafemac.com/how-to-reinstall-mac-os-x-from-scratch/
    OS X Yosemite
    https://support.apple.com/kb/PH18869?locale=en_US&viewlocale=en_US
    Best.

  • I bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?, i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?

    i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?, i bought a new macbook pro ,and i wnt to upgrade it to lion can i do that for free, if so how?

    Apple has information at the link below.
    http://www.apple.com/macosx/uptodate/
    Stedman

  • I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

    I installed indesign CS5 on new macbook pro and keeps freezing with spinning wheel once the app opens. Is there an issue with OS Mav or font issue or a plist I can pull. All other Adobe products work.

    Migration should never be done with any Adobe program.
    If you have done Migration, you have to UNINSTALL first (if even possible) and then download Adobe Creative Cloud Cleaner Tool and run that also. When this is done, restart your computer and install the programs from an original Adobe Installer.
    Other question is, if your OS is supporting that version. You can try it, it is not officially supported, but it might work.
    But CC will work, upgrade to CC2014 (without additional cost), use that as it is better anyway.

  • I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

    I have a macbook pro and the software with snow leopard only has upgraded to 10.5.8, do I need to purchase mountain lion to upgrade to 10.6.8?

    Your machine likely can't handle Mountain Lion 10.8 nor 10.7, if it does it will run slow and very higly likely a lot of your third party software and drivers for printers and scanners won't function anymore.
    It's because your 10.5 era (or earlier) machine is rather dated, hardware has advanced and is faster, the newer OS X versions have gotten bloated.
    I do recommend you call Apple via phone and order the 10.6.3 white retail disks, backup your personal data off the 10.5.8 Mac to a external storage drive and when the disk arrives, stick it in and run the upgrade installer.
    Once that's finished, reboot and use Software Update to get to 10.6.8 and stay there. You can buy stuff from AppStore, just don't upgrade to 10.8 (or 10.7) as thats when you'll have issues.
    10.6 should run your currrently installed PPC software and hardware drivers. But 10.7/10.8 will not.
    10.6 is receiving security and other updates from Apple as more than 50% of OSX users are still on it.
    Most commonly used backup methods
    Things to consider before upgrading OS X

  • Hi.  I have a Macbook Pro Model 5,5 with one 800 firewire port.  I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras).  Is this possible or do I have to have an express card slot in order to do

    Hi.  I have a Macbook Pro Model 5,5 with one 800 firewire port.  I need to create two firewire 800 ports but only have an SD card slot (this is for video interface with 2 cameras).  Is this possible or do I have to have an express card slot in order to do this?

    Hi Jessica,
    No, the SD slot will not work, you need an ExpressCard/34 slot.
    I do not know if it works with cameras, but with two or more HDs, if the first one has two FW ports, you can "daisy chain" one or more additional HDs from it.

  • 15" MacBook Pro randomly loses connection to my AirPort Express wi-fi network.

    My 15" MacBook Pro randomly loses connection to my AirPort Express wi-fi network. I have to switch off wi-fi on my Mac then switch on again to reconnect. Any reason why this random occurrence keeps happening which never happened before? Any solutions and fixes would also be welcomed.
    Jazz

    In the airport utility, you can alter the radio modes... and change the channels from automatic to a manual one.
    Hold down the Option key, and  click on your wifi icon, it will tell you what channels are currently being used on your OSX.

  • I've updated my Macbook Pro and my iMac with Maverick, updating the various apps. On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory, and it's based our Mail, the only app not updated. Ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

    Maverick and Your System message
    I've updated my Macbook Pro and my iMac with Maverick, updating the various apps (Pages, Aperture, iPhoto, Numbers & iMovie, too) in the process.
    On my Macbook, everything functions perfectly. On my iMac, I get the Your System has Run out of Application Memory message. But it's not Calendar, it's Mail that not only won't open, but when it does now, it takes the entire system out with it.
    I open Safari, and it works. I open Firefox, and it works and Safari still works. I open Calendar and it works, Safari and Firefox continue to work. I open Reminders, and everything still works.
    I open Aperture, and it opens Finder instead, showing the 3.5 update that was installed two days ago (and Aperture has functioned), but doesn't seem to update the app; after about 20 seconds the update disappears and I can now open Aperture and it shows I'm now opening the updated Aperture, which it didn't show before.
    I click on Mail, and the cursor spins for ten minutes. The mail window finally opens, but the cursor spins and does not connect to upload new mail, and I finally Force Quit Mail. Since the Maverick update, even though Mail was not updated (and maybe because Mail was not updated), I have been able to receive emails twice, and then the program crashed.
    Besides the Aperture app, Pages didn't fully update on the iMac, and I had to remove the old Pages icon from the dock after the new program loaded up from Applications.
    Any ideas?

Maybe you are looking for

  • Store Business Document via SAP GUI for HTML

    We are trying to use SAP GUI for HTML via UWL in Portal to deliver Workflow. When we try to attach files for the "Store Business Document" step, it gives an informational message "Store business document Access via 'NULL' object reference not possibl

  • Displaying HTML page from JFrame

    Hi , I have a JFrame GUI with menus and menu items. After Clicking on the Help Menu Item, I want to display a HTML page. Does anyone know of a function to display an HTML page?

  • Change UDP Socket.ReceiveBufferSize under Windows

    I've previously used a LabVIEW LLB that allows customizing a TCP socket (TCP_NODELAY LLB) to enable and disable delayed acks. This NI LLB contains a pasword protected VI that returns a raw TCP socket ID that is in turn used as an input to a Call Libr

  • NWDI in NW04s

    Hi, We have installed NW04s recently and would like to configure our NWDI. However we are unable to create Software Component. When we ran the template for NWDI,it went through successfully. Do we need to do anything before creating SC that I may hav

  • Dynamic memory allocation

    Hi, guys, does anyone know whether I can use dyanmic memory allocation on the Real time system with "call library function" node. DLL is programmed using C language. Thanks. Machman