How do you set up a wireless router for laptops only?

Recently I purchased the Lynksys WRT54G2 router for my home. My wife and I both have laptops and NO desktop computer. How do I hook up the router to work on both our laptops since we dont have a desktop computer? Thanks.

Connect one of your Laptop's to the router and configure your router...Once your router is configured you can run both the computers wireless...To configure the router :
If your ISP is Cable follow the link here...
If your ISP is DSL follow the link here ,
this will configure your router for Internet access, now change the wireless settings on your router...
Click on the Wireless tab on the Setup page- Here Wireless Network mode
should be mixed- Provide any non linksys network name ....
Name (SSID) box- Set wireless channel to 11- And wireless SSID
broadcast should be Enabled and then click on "Save Settings" >>Now
Click on the Sub tab under wireless > "Wireless Security"
Change the Wireless security mode to "WEP"...and put a 10 have a note of the key ...
click save settings ...
Click on Advanced Wireless settings>>
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" ...
Try to look for the Wireless Network on both the laptops and connect...

Similar Messages

How do I set up my wireless router for a secure connection

I lost my password to access my router. I reset the router to added a wireless printer and I now I'm trying to secure the connection. I have tried 192.168.1.1 IP address, but it takes me to Bing.com. I can't get to the login page to type in the admin password.

First of all do not use the Wireless computer to access the Router's setup page.Use the wired computer.Check the ip address you are getting from the router..Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then,adjust Browser Settings... Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
Now try.......

HT201320 how do you set up and exchange account for google mail

how do you set up and exchange account for google mail

If it's a free gmail account, you don't. Google no longer permits free accounts to be set up using Exchange Active Sync. Only paid google apps accounts can be set up as Exchange accounts.

How do you set up usb device (remote for ppt) to work with iPad2

How do you set up a USB Device (a remote) to work with an iPad 2? I have the digital camera connector but when I plug the remote in, the device is not recognizable. We are trying to run a slideshow on the iPad using the remote to advance the slides. Thus, the viewer does not have to swipe to advance to the next slide.

...I have the digital camera connector...
Simple answer: no, you can't use that remote with the iPad.
The Camera Connection Kit (CCK) is only for importing pictures. It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

How do you replace a Virgin wireless router with a time capsule?

Hi Folks
i have just bought a brand new 1tb time capsule yesterday and im trying to connect it too my virgin modem and replace the virgin wireless router i already have.....i thought it would be an easy setup of just plugging in the ethernet cable into the time capsule..but this has not worked??..can this be done?? i have restarted all devices too!...i am now clueless!
the the time capsule has backed up my hard drive (mac book pro) with no problems!
kind regards
kathdol

Are you talking about a separate modem and Virgin router, rather than their wretched 'Superhub' (modem and router combined) - the latter is a whole different can of worms.
Assuming the former, you should be able to remove the Virgin router and plug your Time Capsule into the modem: you will need to power down the modem and leave it for a few minutes (to forget the MAC address of the Virgin router), then plug in the TC and power up the modem. Make sure that the TC is set to 'Share a public IP number', not 'Distribute a range of IP numbers' or 'Bridge mode'. (If the interface is the same as the Airport Express it's 'Manual Setup'>'Internet' (in the toolbar)>Internet settings.

How do you set up a wireless Targus mouse?

Hi, I need to know how to set up a wireless Targus mouse with a USB tracker plugged into my mac. I cant seem to figure it out. I have tried pressing the 2 sync buttons on both of the devices, but that didn't work. Please Help!

Please carefuly read Printing Overview OS X Lion

How do i set up the wireless option for printing rather than using an usb

how do I set up wireless printing function on my hp photosmart C4780

This should help: http://www.hp.com/global/us/en/wireless/reconfiguring-system-help2.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do you set up a custom color for the standard screen mode

This new colour scheme has not enough contrast for it to be readable, so I was pleased to find custom screen mode. However, there seems to be no way of setting up a custom color for this. In addition, the icons are so small they are unreadable. Is there any way of making them bigger. I have a 20" and a 22" monitor working together, but they are still not clear enough to use.

Hi there
Are you referring to the tool icons in Photoshop CS6? There are a few options you can change to help make the interface more readable, but unfortunately, there is not an option to enlarge the tool icons.
It sounds like you may have discovered this already, but if you go to Photoshop > Preferences > Interface, you can change the color of the Photoshop CS6 interface.
You can also enlarge the UI text size in this same window, in the Text preferences box.
You can also make the size of your layers thumbnails larger. You can do this by clicking on the small menu in the upper right hand corner of the Layers Panel and selecting Panel Options.
Here you can change the size of the layers thumbnails.
I hope this helps you out a bit!

HT2506 how do you set Preview as the default for opening pdf in browser?

How do I set the Preview application to be the default for viewing PDF's in while in Safari? Previously, while in Safari and clicking on links to PDF's, they would display with buttons on the bottom that made it simple to view and download the PDF. Since updating Adobe Reader it seems Reader is now the default application for viewing PDF's accessed from the internet. I haven't been able to figure out how to revert back to Preview.....

I did this and now Safari won't open the form at all.
I put the files back and it opens in Adobe.
When I save the files to desktop they open in Preview. But I am trying to read pdf's(? forms) while in Safari.
Adobe does not work smoothly in Safari and scrolling to read is a nightmare.
OS X 10.8.5
This problem came up within the last few months.
Before everything opened in Preview perfectly.

How do you set up your directories/permissions for your media?

I have a PC under my TV. It has all the media for the house. What's the best way to get :
rtorrent
mpd
xbmc/vlc/boxee
my username
maybe some other usernames
to all have the permissions they need on my media?
i'm thinking about making a /home/share or /home/public...
Is there a standard way?

What I did was make a public Samba and NFS share (default for NFS is /export). In there I have one public writeable folder /export/public, all others are read-only, owned by root. When I copy new stuff into public I later move it to a read-only directory. This works quite well.
In your case I would set up a seperate user for each service and give them a private directory to write to. To my knowledge, only rtorrent will need write access.
I don't work with all services listed above, but it should be trivial to configure them to read from a central store location.

How do I set up a new router for my macbook?

I am living in South Korea and recently just bought a new unicorn router. I followed all of the instructions. I went to the IP address that it listed, typed in all of my IP information that was on my mac and I just can't get it to work. Has anyone else had this problem?
Thanks

Typically unless you're using a static IP you shouldn't need to type that information in. It sounds like that may actually be the problem and you might want to see if there are separate instructions to set it up dynamically. Maybe if you can get us screenshots we can look at the settings you have for you. Also, is this connecting wirelessly only or are you connected through ethernet?

How do you Set up apple ID / iCloud for family?

I have an Apple ID along with an iCloud account. My wife also has her own ID and iCloud account. We have two young kids that are starting to enjoy games, movies, music, etc... Currently we have 3 iPhones, iPad, an iMac , and Apple TV.
Both my wife and I have been purchasing apps separately but would like to share the apps with all of the devices. (We are both currently using the same music and photo libraries). Even with a family account it is important that my wife and I maintain our own contacts and mail and iMessages.
I like the idea of setting up a new Apple ID but get a little confused when it comes to iCloud.
Should I create a new Apple ID for the family and use one of the current iCloud accounts for the family purchases? (or get a third iCloud account?)
If we go with this new shared account idea, is it possible to still load some of the apps that we have already purchased, or do we have to start fresh and re-buy the apps that we like under the new account?
Seeing the majority of apps have been purchased under my Apple ID, it may make sense to use my iCloud for all of the purchases but don't want to share mail etc with my wife or kids?!? I'm confused.
Thanks in advance for you help...
TY

I was having severe trouble with this myself until finally I decided to call Apple and spent an hour on the phone with a senior tech advisor. We finally figured out how to get it to set up Apple ID Authorization.
To do this First go into System Preferences>Sharing, then make sure screen sharing is turned on. From there, there is a list of authorized users with plus and minus buttons in the bottom left. Click the plus to add a new user, and then click New Person in the new window. After that a final window appears asking for User Name and Password. Simply put the name of the person you are adding with any password and click Create. From here go back to System Preferences and click Users & Groups. In this window you should see the new Sharing Only user. Click on them and set an Apple ID. After that test the new Sharing User by having the owner of the Apple ID connect to screen sharing or File sharing from their Mac. Keep in mind this only works Lion to Lion and they have to have their Apple ID set to their user on their own machine.
Good luck!

How do you set the time and date for the fax on the HP Office Jet 4622 All-in-one Printer?

I installed the HP Office Jet 4622 All-in-one Printer and everything works wonderfu. However on the test page for the fax the time and date are showing Jan-00-00 00:00AM. I do not know how to change the date and time. Please help. Thanks.
This question was solved.
View Solution.

Use the Setup (wrench icon) button on the front of the printer to look through the settings menu to set the printer time and date.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do you set a default home page for tabs

Default home page setting is easy enough but when clicking the "+" to open a tab I want to set the page that it defauts to. You would think that it would do the default home page but it doesn't and I cant find where to set it.

Troubleshooting tips on the '''browser.newtab.url''' preference:
''If Firefox won't let you edit this setting:'' you may have something called SearchProtect on your system. This needs to be removed from the Windows Control Panel.
''If Firefox lets you save your change but ignores it:'' one of your extensions may be overriding it. You can review, disable, and/or remove extensions on the add-ons page. Either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
In the left column, click Extensions. Then cast a critical eye over the list on the right and disable (or remove) anything unknown.
''If the change works during your session, but at the next startup is back to the unwanted page:'' you might have a user.js file in your personal Firefox settings folder (your Firefox profile folder). This article describes how to track down and remove the file: [[How to fix preferences that won't save]]. Also beware of features in utility programs like Advanced SystemCare that roll back settings changes between sessions.
If bad add-ons do not have a Remove button or keep coming back, here's my suggested procedure for tracking down and cleaning them up. I know this seems long, but it's not that bad.
(1) Open the Windows '''Control Panel''', Uninstall a Program. After the list loads, click the "Installed on" column heading to group the infections, I mean, additions, by date. This can help in smoking out undisclosed bundle items that snuck in with some software you agreed to install. Take out as much trash as possible here.
(2) Open Firefox's '''Add-ons page''' using either:
* Ctrl+Shift+a
* "3-bar" menu button (or Tools menu) > Add-ons
* in the Windows "Run" dialog, type or paste <br><code>firefox.exe "about:addons"</code>
In the left column, click '''Plugins'''. Set nonessential and unrecognized plugins to "Never Activate".
In the left column, click '''Extensions'''. Then, if in doubt, disable (or Remove, if possible) unrecognized and unwanted extensions.
Often a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
Any improvement?
(3) You can search for remaining issues with the '''scanning/cleaning tools''' listed in our support article: [[Troubleshoot Firefox issues caused by malware]]. These on-demand scanners are free and take considerable time to run. If they finish quickly and especially if they require payment, you may have a serious infection. I suggest the specialized forums listed in the article in that case.
Success?

How do you set a default format property for a formula defined in the AWM?

Is there a way to define a default format property for a formula that I create in the AW?
For example, if I define a formula in AW I can assign it a datatype of decimal. But what property do I need to add if want that formula to by DEFAULT always display a certain way, regardless if I use the Discover Plus with OLAP option or OracleBI Spreadsheet Addin?
Example: want to display it by default, in the AW cube, as being associated to a format of 00.0000 or 00.0000% or $###,##0.00 etc. This way, no mater what tool I use to view the cube, it will by default inherit my default format (set in the AW).
Thanks.

Okay, but if I use the out-of-the-box products Oracle provides (ie: Discover Plus with Olap, and the OracleBI Spreadsheet Addin) I still dont understand what my solution is?
The only other solution we tried was to create formulas using AWM template files. The issue here is trying to find out what property syntax needs to be added to the XML code, so that my formula, by default, is associated to a certain formating style (ie: 00.00). And then when you reference that formula in those out-of-the-box Oracle products, it displays as expected.

How do you set up a wireless router for laptops only?

Similar Messages

Maybe you are looking for