How do you set up call forwarding?

i am using 2 phone numbers and would like the calls for both numbers to go to which ever phone can be reached. how do i set up call forwarding?

I take it you have two phones, each with a different provider?
How do I activate Call Forwarding?
To activate Call Forwarding:
Press *72.
Enter the phone number where you want calls to be forwarded. (e.g. *72-908-123-4567).
Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
Press END.
How do I deactivate Call Forwarding?
To deactivate Call Forwarding:
Press *73.
Press SEND and wait for confirmation. You should hear a confirmation tone or a message.
Press END.

Similar Messages

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set up port forwarding on an IPad 3 4g connection?

Please let me know how to set up port forwarding on the iPad to point an outside port to one of the devices connected to my iPad hotspot. Thanks.

I'm not sure if the 5.4.1 version that you have will do what you want. Did you mean to say that you had installed the 5.6.1 version?
Sorry, I do not have a PC here handy to test, so you will need to wait for another PC user who can give you step by step instructions.
This article should get you going on Port Forwarding basics:
AirPort - Port Mapping Basics using AirPort Utility v5.x

TS2795 How do I set up call forwarding on my iPhone 4s?

I want to use call forwarding but when I put in the number I want to use nothing happens and the call forwarding switch turns off by itself. What am I doing wrong?

Call forwarding is a carrier feature & must be provisioned properly on your account. So, the first thing to do is contact your carrier & insure that call forwarding is properly provisioned on your account.

HT201436 how do you set up voicemail on the i5? People are calling me, it rings 4 times then a busy signal. I recorded a VM, but what am I missing?

How do you set up voicemail for an I5? People are calling me, it rings 4 times, then they get a busy signal.

This sounds like something on the carrier's end. Call them and see if they have your account provisioned for voicemail.

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up?

How do you set a pre-recorded message to play when a caller calls your iPhone before you pick up? My office is trying to use an iPhone for our business, and we want to give a brief introductory message that the caller will hear, before we pick up the line. Are there ay apps for this? Thanks!

There is no setting for that on the phone. Some carriers provide ringback tones, which play instead of the caller hearing a ring. But I am not aware of an app that would play a message prior to you picking up the phone. The amount of time before you pick up is not a constant, and if it lasts too long, then the call would go to voicemail.

How can you set up more than one device on iTunes. I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices.

How can you set up more than one device on iTunes? I have an iPad, iPod, itouch and iPhone. I don't want the same on all devices. I have all my music/videos on iTunes on my mac book pro. Can you set up separate folders for each device and drop in what ever music/videos from the main iTunes library?

In itunes it is called syncing and you can choose exactly what content to sync to all devices and it can be different for all of them
How to sync

How do you set a defalut theme(in this case, the theme is HiFi) so each time the computer starts, you do not to have to constantly change it??

How do you set a default theme(in this case, the theme is HiFi) so each time the computer starts, you do not to have to constantly change it??

for some reason the function never get's called. I have this
MyComboBox.dropdown.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
and ive tried this:
MyComboBox.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
private function myListener (e:ToolTipEvent) : void {
trace("e: " + e.target);
trace("e: " + e.toolTip);
Any more ideas?

How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE ?

We are using B2B & OSB to send out messages via eBMS protocol
So basically this are the two use cases
1) EBusiness Suite => B2B => OSB=> Customer for the outbound Shipment Notices
2) EBusiness Suite <= B2B <= OSB<= Customer for the Inbound acknowledgement
We are able to use standard B2B functionality to send out the messages using eBMS with https and client certificates
On the way back from the customer, we are using OSB that gets the raw data and the body gets sent to B2B
On the outgoing part a message gets created in B2B and is at MSG_WAIT_ACK
When the acknowledgement comes in, it comes as a seperate messgae in B2B and is at MSG_COMPLETE
How do you set the original outbound message from MSG_WAIT_ACK to MSG_COMPLETE?
We use JMS and have played around with jca.jms.JMSProperty.INREPLYTO_MSG_ID but that is not propagating to REFER_TO_MESSAGE_ID in B2B_BUSINESS_MESSAGE table
I tried using jca.jms.JMSProperty.CONVERSATION_ID as well but no luck
Any response is highly appreciated!

Are you asking about your own JavaMail code or about somebody else's web-based mail agent?
If it's the latter (which is what it sounds like) then you find the checkbox in the preferences configuration, or whatever they call it, which says "Include original message in reply", or something like that. If such a thing exists, that is. If you're thinking that the e-mail message controls how their code formats replies to it, that's not how it works.
Even Outlook lets you configure how replies are formatted, the only difference is that the Outlook default is to include the original message and your web-based agent's default is to not include it.

How do you set a image in the background of a JTextfield?

How do you set a image in the background of a JTextfield? Any ideas?

You can't thats why it is called textfield!!!
Take a look at JScrollPane API for this

CS6 How do you set form font

We have a diary type form that needs to be in Helvetica
Just tried to set up in CS6 and can't see where to set the font - text boxes default to times
How do you set the font in Indesign's new PDF form creation tool text boxes?
tia

For me, the first answer here gave the most important element of information.
When Bob said "Does it occur to you that perhaps they just didn’t have time to get all of this in?"... Well yes, it sure did occur to me! And my reply to this would be: "What if they had taken a little more time and made sure they'd managed to have a function that is a little more complete before releasing the newer version?".
This has been my main issue with any company that releases products on an (almost) yearly basis: OBVIOUSLY they won't have time to complete everything!
Maybe, I'm only saying maybe, Adobe could have waited a liiiiitle bit longer and provided a finished product. Now of course, people will always have a new feature in mind, or a genius idea that they'd like to see happen in a program.
I also know that the high management would have been pushing for everything to be ready "on time", but then if you know you won't finish it, leave it out!
I was also very much looking forward to the new feature in InDesign as I have to make multiple copies of the same form translated into various languages.
And I had the very same problem as jahallaa, but with our French versions of these PDF forms.
So, yes, having the option to create the form in InDesign is a great for most of it. Fortunately, the font choice for our forms isn't all that important for me, in this specific case, so it wouldn't matter which font is used IF only it would understand accentuated letters properly.
Also, reading several times that "the Acrobat team didn't provide all the codes to the InDesign team" leaves me a little perplexed... If they are not going to get a complete code, then maybe, once more, they should wait until they get the complete thing. Now, of course, I don't know why the code would be provide incomplete, whether it's competition between the teams, security or plain weirdness but still... If you're going to implement a feature, make sure it fills in the major bullet points! If it doesn't, well give the marketing a rest and wait for the next release!
Now after saying all this... When our files are translated, they have to be converted into an IDML file to be compatible with our translation tool. I then have to reimport them into InDesign to finalise them, once translated.
Come to think of it, I'm pretty sure they will lose the forms function in the process, seen that this function didn't exist in CS 5 or 5.5 and that the IDML file loses any function that is not downcompatible.
Dammit!! I'll now have to fiddle around with 2 files and import layers and such...
Ah well... Sorry, rant's over!
Little Red Frog

How do you set slide size in inches (8 1/2 by 11)

When I try to print, it doesn't print how I see it on the screen. I think it is because the slide sizes are wider than an 8 1/2 by 11 sheet (for widescreen viewing). How do you set up the page size so things print correctly. I tried to do this but it looks like you have to set the size in pixels and they don't give you an option for inches. I think this also affects when I export to PowerPoint and text boxes and other things are more squished in or not alligned. How do I configure Keynote slides to be 8 1/2 by 11?

Get yourself a copy of a program called PhotoScape. (Link)
Please mark the post that solves your issue as "Accept as Solution".
If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
I am not a HP employee.

How do you set up location services

how do you set up location services

Look on the side of your WiFi router/modem and there should be a string of numbers and letters, unless you set up a custom password when you bought it. In that case, you would probably have to call your WiFi service provider and talk to them.

Speed dialing - how do you set it up?

Hi,
How do you set up the speed dial buttons for frequently used numbers?
The Answerphone is set, can't seem to find a way to set the other buttons!
Any ideas anybody?
Thanks...

Hi Archiver,
Welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
You can also add contacts to the homescreen for faster calling to specific contacts.
1. Tap and hold finger on Homescreen
2. Tap Apps
3. Tap Shortcuts
4. Tap Direct Dial
5. Choose contact
Once chosen the contact will be added to the Homescreen and can simply be pressed to make a call.
i hope this helps.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do you set your surcuitity questions

How do you set your surcuitity questions?

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'. Please be patient waiting for the return
          phone call. It will come in time depending on how heavily the servers are being hit.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

How do you set up call forwarding?

Similar Messages

Maybe you are looking for