How do you set up captivate 7 as a default program in windows 7

having trouble opening .cptx files with Captivate 7. Need to know how to get Captivate to be reconized as the default programs for .cptx files.

Hi,
ideally, you should be able to do this on Windows 7 from
1. Start > Control Panel > Default Programs > Associate a File Type or protocol with Program.
2. Then scroll and select .CPTX and click Change Program an click Browse.
3. Navigate to Adobe Captivate folder at C:\Program Files\Adobe\Adobe Captivate 7\
4. Select "AdobeCaptivate.exe" and click open.
5. Now click Ok and check if you see AdobeCaptivate.exe under "Current Default" column on the Set Associations window.
In case it still does not works, can you please confirm at which of the above steps are you facing an issue.
Regards,
Sharad

Similar Messages

How do I set Adobe reader X as the default viewer in Windows XP and Internet Explorer 7

How do I set Adobe reader X as the default viewer in Windows XP and Internet Explorer 7 ?

You can check the following settings: Edit -> Preferences -> Internet -> Web browser options
It should set Adobe Reader as a default viewer in the Internet Explorer

How do I set Adobe Flash Player as the default program to open SWF files?

Basic Overview
I have this working fine at my home laptop, however I need this working for projects at school.
Whenever I want to open an SWF file at home, I simply double click it and open it in Adobe Flash Player (Adobe Flash Player 10.0 r22) and I have no problems!
However, when I am at school I have to run SWF files within Internet Explorer, Adobe Flash Player IS installed, but the SWF files are not opened in that directly, they are opened within Internet Explorer.
At Home
If I right click an SWF file at home and select "Open With" and then "Choose Default Program...", Adobe Flash Player is already there under the name 'Adobe Flash Player 10.0 r22', so I can simply select it as the default. (On my home laptop)
At School
At school if go to "Open With" and then "Choose Default Program...", Adobe Flash Player IS NOT there, only Internet Explorer and some other programs in the other programs box. (On my school laptop)
Question
How can I assign Adobe Flash Player as the default program for opening SWF files (on my school laptop)? If I select "Browse..." and go to C:\WINDOWS\System32\Macromed\Flash there is no file with a description of 'Adobe Flash Player 10.0 r22', is the file for the actual program located somewhere else or have I just no looked properly in the folder?
I really need these files opening in Adobe Flash Player directly and not in Internet Explorer (I know you can set the view to 100% and have it sized correctly)
Thanks you to everyone who helps!
-Charlie! (Yes I know I don't need to write this in a forum)

The standard Flash Player is a browser add-on, and not a standalone player. So what actually opens when you open an SWF file at home? Flash Player Projector?
If so, you also need to download it at your school, from http://www.adobe.com/support/flashplayer/downloads.html, then do the file association.

How do you set a component back to the Default Skin?

I have a title window and have applied a minimize button
skin... I need to reset the skin Back to the Default skin.
Code to skin the button to minimize.
setStyle ("closeButtonDisabledSkin", MinDisabledSkin);
setStyle ("closeButtonDownSkin", MinDownSkin);
setStyle ("closeButtonOverSkin", MinOverSkin);
setStyle ("closeButtonUpSkin", MinUpSkin);
How do you reset it to the default close button skin?

The only way that I've been able to do this is to create your
own style for the close button state.. Basically create your own
styles for everything.. because I don't think you can toggle
between yours and Flex's

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you Set up a Family Pack sub-account

how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
Denis

Thanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis

How do you set up separate facetime accounts under one apple id

how do you set up separate facetime accounts under one apple id

This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!

How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

Are your contacts not on your computer?

How do you set up two different ipads on one computer ?

I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system. How do you set up two different uses on one computer.
Thanks,
Dave

Other options not covered in the article:
1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

How do you set NLS_LANG environment variable in report builder

How do you set up the reports builder environment to display foreign fonts.
So far what I read makes me think that in report builder I have to set the NLS_LANG environment variable .
If anyone has done this is that true and if so how.
Also the languages I want to use are the following.
Armenian
Cambodian
Chinese
Russian
Tagalog
Vietnamese
How do I find the NLS_LANG environment variables for these.
Where I am at now+
I have to set the DEVELOPER NLS LANG. I see the NLS LANG in the registry and I guess I have to add the DEVELOPER NLS LANG.
Now I am searching for syntax. If anyone knows the syntax for those languages please let me know and how do I set more than 1 at a time.
Howard
Edited by: csphard on Apr 14, 2010 5:17 PM
Edited by: csphard on Apr 14, 2010 5:22 PM
Edited by: csphard on Apr 15, 2010 9:02 AM

Hello Howard,
Check out the following link here you can find your desired NLS parameters.
http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
And about the NLS_LANG for developer why you want to create for developer. Its is already there in REGISTRY. Just seaching in developer registry you can find there.
how do I set more than 1 at a time.
You can set only one NLS_LANG parameter at a time.
-Ammad
Edited by: Ammad Ahmed on Apr 15, 2010 8:52 PM

How do you set up a different ipad on same computer with different itunes library

I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer. When I open up itunes with his apple ID, I continue to get my itunes library information. I don't want to mix my information with his information. How do you set up a different i pad/itunes on the same computer? What I need to do is update the version of his i pad as his i pad is version 4.2.1. Thank you

Create a new Windows user account on the computer.
(86398)

How to you set up a POP email account on iPhone 5S?

How do you set up a POP emial account on iPhone 5S. It only gives me an option for IMAP and I need POP
THANKS

Turn it on airplane mode. Then set up you new account with all of your credentials. Save, once it allows it. Turn Airplane mode off, and then go back and select POP.

How do you set up iTunes 10.5 on a new computer?, How do you set up iTunes 10.5 on a new computer?

I have a new computer with Windows 7, Outlook and I use iTunes with an Apple iPhone 4 and a iPad. My devices have iOS5. How do you set up iTunes 10.5 on a new computer and sync these devices. I have already downloaded iTunes 10.5 on my computer. Also, I use MobileMe. Thanks for your help. LCP

Thank you for your response. I have all of my files, etc. and am sitting here on the old computer. I just wasn't sure if I should simply save the iTunes program I am using or insall a new version.
After I get iTunes onto my new computer do I authorize the new computer before I plug in my IPod or after?
I'm sorry I didn't point out that I had all of my files available. For some reason, working with iTunes and my iPod make me nervous.
Thanks again.
Rustyglo

How do you set up captivate 7 as a default program in windows 7

Similar Messages

Maybe you are looking for