How do you set up eprint to work on Laserjet P3005dn

I cannot find the list of supported printers for eprint. Is Laserjet P3005dn supported? if so how do you set it up?
This question was solved.
View Solution.

Hi,
No, it does not support ePrint:
http://www.fastprinters.com/pdf/HP-P3005.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

HT1212 How do you set the internet to work? Ipod won't let me find how to enter the network setting. What to do?

For some reason, the ipod touch is talking and forcing user to touch same buttons three times to create one on screen character. These actions must be turned off. Internet settings somehow have been knocked off-line and the ipod is not allowing any options to appear to change this problem. Internet access and codes are available, but the ipod will not allow the code to be entered anywhere.

You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)

How do you set up usb device (remote for ppt) to work with iPad2

How do you set up a USB Device (a remote) to work with an iPad 2? I have the digital camera connector but when I plug the remote in, the device is not recognizable. We are trying to run a slideshow on the iPad using the remote to advance the slides. Thus, the viewer does not have to swipe to advance to the next slide.

...I have the digital camera connector...
Simple answer: no, you can't use that remote with the iPad.
The Camera Connection Kit (CCK) is only for importing pictures. It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

HT201320 how so you set up email that is not hotmail, gmail, etc..?? every time i try to add an account, it doesnt work

How do you set up email on iphones that are not icloud, exchange, gmail, yahoo,aol, or hotmail?

I'm thinking you sync to your computer over Wi-Fi, if correct, switch to sync when connected to iTunes, turn off sync over Wi-Fi. Hope this helps, Good luck. Cheers.

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you set up iTunes 10.5 on a new computer?, How do you set up iTunes 10.5 on a new computer?

I have a new computer with Windows 7, Outlook and I use iTunes with an Apple iPhone 4 and a iPad. My devices have iOS5. How do you set up iTunes 10.5 on a new computer and sync these devices. I have already downloaded iTunes 10.5 on my computer. Also, I use MobileMe. Thanks for your help. LCP

Thank you for your response. I have all of my files, etc. and am sitting here on the old computer. I just wasn't sure if I should simply save the iTunes program I am using or insall a new version.
After I get iTunes onto my new computer do I authorize the new computer before I plug in my IPod or after?
I'm sorry I didn't point out that I had all of my files available. For some reason, working with iTunes and my iPod make me nervous.
Thanks again.
Rustyglo

How do you set up your Configuration Manager client when Imaging?

OK everyone we got an issue that we need to take care of sorry if this seems like a dumb question but we cant seem to make this work. How do you set your configuration manager client when you deploy your image(s)? I created package and pointed
it right to the config manager install directory just like the recommended one for USMT but it does not seem to work. I also tried to leave it blank but it appears to be mandatory.. So my question how do YOU get it to work for your areas?
Thanks

that might be the problem I dont see a "Microsoft Configuration Manager Client 5.0 All" anywhere. We threw something together that points to:
\\Server.Domain.com\SCCM_Install\SMSSETUP\CLIENT
What is happening is this.
Have a task to deploy Windows natively to the workstation
Drop applications to the workstation
do updates
capture back to server
All it does is
Drop the OS down
copy the Agent files
join to the domain
reboot
sit
sit
and sit

How do you set up a simple web page to upload photos from iMac?

How do you set up a web page on the iMac so you can upload photos and maybe even video from iPhoto to it?

You really do not need to create your own web page or site to upload photos to the web.
There are many sites that can host photos for free or very cheaply per year.
You create your own user location on these sites.
Do a search for either web hosting sites or photo hosting sites.
Here are a few you can look at to get you started.
There's Apple's own iCloud
Facebook
Image Shack
Photobucket
Picasa
Flickr
To name a few.
Do a search and see which photo uploading site works best for you .

How do you set up the passkey between the Mac & Palm?

Hi all,
I need help with a couple of things relating to bluetooth and Mac;
a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
thanks
iBook 1.2GHz Mac OS X (10.3.9)

Palm has this to say about the issue:
'Unable to initiate HotSync operation because the port is in use by another application.'
This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
Unable to initiate HotSync operation because the port is in use by another application.
Why does this happen?
Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
What should I do?
If you see this error, here's how to correct the issue:
1. Launch the HotSync application on your handheld.
2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
4. Do this every time you wish to synchronize using Cable/Cradle.
5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
http://www.palm.com/us/support/macintosh

How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
This pritner is fully compatible with Airplay per HP site
My dad has no PC
He knows the router passcode.
What is the process?
Will the HP printer to be purchased shortly work out of the box w/no drivers
How do you set the printer up to work on the iPad?

Richard-
I have the HP D110 AirPrint printer. As I recall, it was configured in Ad Hoc network mode when first received. It was necessary to set it up to access my WiFi router before I could use it with the internet connection. Then, as part of the setup process, it downloaded the latest firmware update from HP. This was all done from the printer control panel, and no PC was needed.
As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer. Go ahead and try it, it may work. If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
By now, you should realize that a PC is needed to update the iPad. I assume your Dad visits you when he needs use of a PC.
Fred

How do you set the text of a Hyperlink component in code

I am using Visual Web pack in NB 6.0. How do you set the text of a hyperlink component in code?
Please see screenshots at
http://coba.usf.edu/departments/isds/faculty/agrawal/projects/java/
I have a hyperlink in a grid panel. I am using
hyperlink1.setText("Hello"); in prerender(),
but the Hyperlink shows up with the text "Hyperlink", whereas I was expecting "Hello". However,
hyperlink1.setUrl("http://www.usf.edu"); works as expected.
I tried nesting a static text in the hyperlink as suggested in the Creator guide (ed 2, Google project). I deleted the "Hyperlink" text in the properties editor but then the page turned out blank.
Thanks
Manish

Hi Manish,
Great to know you were able to fix your issue. The following blog entry has the list of resources you would like to look at for future.
http://blogs.sun.com/NetBeansSupport/entry/useful_resources_for_visual_web
Thanks
K

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you set-up a hotmail email address in mail

how do you set-up a hotmail email address in mail?
I cant seem to add it. any ideas why it cant connect to the server? what server address should i be using?
regards
Brendon

Hi bmuur,
I also had the same problem.
I clicked Microsoft Exchange and kept trying to add my hotmail account that way but it kept asking for a server address for it to work.
If you go into Internet Accounts and instead of clicking Microsoft Exchange scroll down to the bottom of the list and click Add Other Account...
It will ask what sort of account you want to be created and I selected Add Mail Account and clicked create.
Enter your full name, hotmail email address and password.
I then clicked create and it worked for me.
Hopefully this solves your problem.

I just purchased a Thunderbolt Display for use with Photoshop work. How can I set up to show/work in separate programs on each screen?

I just purchased a Thunderbolt Display as an additional screen for Photoshop work. Following set up instructions appears to allow only mirroring of the screens. How can I set up to show/work in separate programs on each screen?

Yes, each blue rectangle is a screen. You can create different geometries, to suit your needs. For example, you can even make this kind of thing... :
Or this:
I don't know why you would want to do that, but you can!

How do you set up eprint to work on Laserjet P3005dn

Similar Messages

Maybe you are looking for