How do you set up for AirPrint an HP110A wireless printer without a PC on a wifi network using a Verizon FIOS router)

Purchasing an HP110A wireless printer for my 85 year old father who has and Ipad
This pritner is fully compatible with Airplay per HP site
My dad has no PC
He knows the router passcode.
What is the process?
Will the HP printer to be purchased shortly work out of the box w/no drivers
How do you set the printer up to work on the iPad?

Richard-
I have the HP D110 AirPrint printer.  As I recall, it was configured in Ad Hoc network mode when first received.  It was necessary to set it up to access my WiFi router before I could use it with the internet connection.  Then, as part of the setup process, it downloaded the latest firmware update from HP.  This was all done from the printer control panel, and no PC was needed.
As Pvonk mentioned, your router must be able to correctly handle Bonjour data for iPad to print to an AirPrint printer.  Go ahead and try it, it may work.  If the iPad can't find the printer, you will need to contact Verizon for help in configuring the router or getting a different router that is compatible.
By now, you should realize that a PC is needed to update the iPad.  I assume your Dad visits you when he needs use of a PC.
Fred

Similar Messages

  • HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

    how do you set the airport time capsule as the primary base station rather than as a network client?

    The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
    So, the first logical question here would be......
    What is the make and model number of the device that you call your "modem"?

  • How do you set up the paypal standard gateway to work without a web form?

    I must have missed a step.  I have this site set up and the paypal standard gateway does not work with a web form, but works with shopping cart.  Does that mean I need to disable the web form page and use something else to check out?  How do you do this?  The BC help page on this stops at this point in describing what to do. 

    For those who are running Windows and controlling the Airport Base Station with Airport for Windows.  Apple just came out with a firmware update for Airport Extreme (7.7.2).  It so happens that this Firmware version requires Airport Software version 6.3 or newer.  The Windows version only goes as high as Version 5.6 or so.  I was also told that Apple is unlikely to upgrade this software.  To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app.  This solved my problems.  Good Luck :)

  • How do you set up for another ipod on same computer

    I just bought another ipod for my wife and she wants to set up her own itunes account or a completely different library. Can this be done on the same computer or do we have to share the same music?

    There are basically two different methods for how to manage two iPods on a computer, but keep what the content that's being synced to them separate; you can have different user accounts, or different playlists in iTunes for each iPod.
    This article should explain it all:
    How to manage multiple iPods using one computer
    -Kylene

  • How can you set up 2 iTunes accounts from one computer without synching each other's libraries?

    We have 2 separate iTunes accounts.  When signed in, using either account, both libraries are combined.  How do we create t
    2 separate libraries?

    see method one here:
    How to use multiple iPods, iPads, or iPhones with one computer

  • How do you set slide size in inches (8 1/2 by 11)

    When I try to print, it doesn't print how I see it on the screen. I think it is because the slide sizes are wider than an 8 1/2 by 11 sheet (for widescreen viewing). How do you set up the page size so things print correctly. I tried to do this but it looks like you have to set the size in pixels and they don't give you an option for inches. I think this also affects when I export to PowerPoint and text boxes and other things are more squished in or not alligned. How do I configure Keynote slides to be 8 1/2 by 11?

    Get yourself a copy of a program called PhotoScape. (Link)
    Please mark the post that solves your issue as "Accept as Solution".
    If my answer was helpful click the “Thumbs Up" on the left to say “Thanks”!
    I am not a HP employee.

  • How do you set up airprint on laserjet pro cp 1025nw

    How do you set up airprint on HP Laserjet Pro CP 1025NW.  If you need e-mail address for the printer, who to get one/set that up?

    Hi NancyFOM,
    You will need to install the firmware update for your printer in order to use AirPrint which can be found here:  http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=lj-86491-4&cc=us&dlc=en&lc=en&​...
    Just save the update to your computer and run it.  You will need to have the printer installed on the computer you are using to perform the update.
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided.
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you set repeat events for a given day of the week

    How do you set a repeat event in calender for a given day of the month.  Expample 3rd Wednesday each month?

    Have you read the app store guidelines yet?
    App Store Review Guidelines:
    http://developer.apple.com/appstore/resources/approval/guidelines.html
    Don't go on what you've seen in the store - for every example you spot, there are hundreds that didn't make it in.
    As well, Apple is tightening up on reviews, etc.
    Loads of discussion on this in the iOS Dev Forums, BTW

  • How do you set the font color for a specific entire row inside a JTable?

    How do you set the font color for a specific entire row inside a JTable?
    I want to change the font color for only a couple of rows inside a JTable.
    I've seen some ways to possibly do this with an individual cell.
    Clarification on changing the font color in an individual cell would be helpful too if
    there is no easy way to do this for a row.

    hai,
    Try out with this piece of code.Create your table and assign the renderer to each column in the table.
    CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
    for(int i=0;i<your_JTable.getColumnCount();i++)
    your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
    class CellColorRenderer extends JLabel implements TableCellRenderer
    CellColorRenderer()     
    setOpaque(true);     
    setHorizontalAlignment(LEFT);
    setVerticalAlignment(CENTER);
    setBackground(Color.white);
    setForeground(Color.black);
    protected void setValue(Object value)
         setText((value == null) ? "" : value.toString());
    public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
         if(isSelected == true)
              setForeground(Color.red);
         else
              setForeground(Color.black);
         setValue(value);
         return this;
    regards,
    bala

  • How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.

    How do you set the default magnification for Acrobat.  All documents that I open enlarge to 174% and are too big.  I see how to change the size after the document is open by going to File/properties/initial view and saving this setting.  I want all documents to open at 100% when they are first opened.  Can I set this as a default view?

    Hey Kris,
    You might go to Edit> Preferences> Zoom
    Do this without opening any particular PDF so that it applies to the program itself and not just one document.
    Try this and then let me know.
    Regards,
    Anubha

  • How do you set up usb device (remote for ppt) to work with iPad2

    How do you set up a USB Device (a remote) to work with an iPad 2?  I have the digital camera connector but when I plug the remote in, the device is not recognizable.  We are trying to run a slideshow on the iPad using the remote to advance the slides.  Thus, the viewer does not have to swipe to advance to the next slide. 

    ...I have the digital camera connector...
    Simple answer: no, you can't use that remote with the iPad.
    The Camera Connection Kit (CCK) is only for importing pictures.  It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

  • How do you set the duration for multiple stills in iMovie 2013?

    How do you set the duration for multiple stills in iMovie 2013?
    Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
    Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
    REALLY??!!

    ...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
    Because often people are animating to words or beats in the music.  Music is rarely performed with a computer-precise beat and tempo.  Musicians aren't robots: they swing the beat sometimes.  They use rubato.  They change tempo.  They change time signatures.  As a result, you have to FIND those words and beats.  It's not a situation where you can say, "There!  I've found the duration of one beat!  Now it's easy to find the rest of them!" 
    If you try it, you will be very disappointed.
    Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out.  You'll see that it's trial-and-error: what's the point where it becomes inaudible?  It depends on how high your speakers are turned up.  You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume.  You might say, "Hey!  The music ends before the layer ends!"...  but you KNOW you set the layer's out point when the audio file goes silent.
    AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
    I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures.  Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works.  For true accuracy, you need  find the timings yourself. 
    If you want something simpler, try a different application. But be prepared for lower level of accuracy.

  • How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

    How do you set the zoom level to Inherit Zoom for all bookmarks in a pdf?

    beatngu13
    I made an account just to "like" your comment and say that you are a god among men.
    I've been searching for hours about how to make the zoom level persistent throughout following links in various PDF's I have, and most sources were saying to just buy acrobat pro and edit the bookmarks manually with it.
    I saw that it was possible to write an application to change the property, and considered doing it after the only pre-existing custom application I could find was asking for $50.
    Thanks to you, I no longer have to worry about re-zooming every time I click a bookmark, and I'm not out $50 or the time it would take to code an app myself!
    From the bottom of my heart, thank you!

  • How can you set the max row for a 'open cursor' in a stored proc?

    I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
    You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
    I would like the same functionality using open cursor inside a stored proc...
    Thanks...

    is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

Maybe you are looking for