How do you set up Logic Pro 9 for transposing instruments?

Is it possible to set up Logic to recognise transposing instruments? In other words, if I'm playing a Bb trumpet part in C, the score would display the part transposed one tone higher & display the correct key signature, but it would still sound in C. The orchestral template does this for you, but I prefer to work from scratch.
Calicoprinter.

Hi
You can do this on a region by region basis by selecting the appropriate Staff Style in the Score Inspector.
If you want to apply a particular Staff Style to a particular track automatically as you record, you can adjust the Style parameter at the bottom of the Track Parameter Box.
CCT

Similar Messages

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

How do you set up nested rules for iTunes smart playlist

How do you set up nested rules for a iTune smart playlist

Hello \"alice\",
It sounds like you want to add additional criteria to your Smart Playlists. I found an article with steps you can use to refine your Smart Playlist. Step 2 specifically has what I think you are looking for:
2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add button.
You can find the full article here:
iTunes: How to create a Smart Playlist
http://support.apple.com/kb/ht1801
The article says it is archived. In the current version of iTunes, in step 1 you will select File>New>Smart Playlist. Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist.
Thank you for using Apple Support Communities.
Best,
Sheila M.

How do you set up repeating alerts for a new voicemail

how do you set up repeating alerts for a new voicemail

makblv wrote:
Please, Apple, offer this convenience to your loyal customers. Thank you.
If you want Apple to know how you feel, Submit your feedback directly using the appropriate link on the Feedback page:
http://www.apple.com/feedback

How do you set up a password for a wireless network when using an Airport Extreme?

How do you set up a password for a wireless network when using an Airport Extreme wireless router?

Thanks for the updated information.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the AirPort Extreme icon, then click Manual Setup
Click the Wireless tab below the row of icons
Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
Enter a Wireless Password and Verify Password
Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

How can you set the max row for a 'open cursor' in a stored proc?

I would like to know how can you set the maximum amount of row returned in a resultset coming from a stored proc?
You can do it via JDBC with cStatement.setMaxRows(10); but it works only for select that you do via JDBC...
I would like the same functionality using open cursor inside a stored proc...
Thanks...

is "where ROWNUM <= 10" the equivalent of "cStatement.setMaxRows(10);" because the ROWNUM as problem with the ORDER BY clause and the setMaxRows() as no problem...

How do you set the home page for firefox for android?

I have firefox installed on my tablet. How do i set the home page or start page?

Hello lalbrecht5, see: https://support.mozilla.org/en-US/questions/953363
thank you

How do you set a calendar alarm for a specific time on the day of the event without it being an all-day event

Does anyone know how to set a calendar alert at a specific time on the day of the event.
So that the alert date adjusts accordingly if you were to copy and past it to another date.
The custom alert function kind of does this, but because it is an absolute alert (not relative) it will still refer to the date you initially set it to when you copy and paste it to another date. So this creates more work where you would have to go and manually change all the custom alerts. I have potential
Anyone know how to set this kind of calendar alert?
Thanks in advance

Greetings: Set the alarm to message you (on your screen) and then snooze it every day for 15 days, or, set 15 separate alarm messages. There is probably an AppleScript somewhere on the web too, try searching that way as well.

HT2534 How do you set up apple Id for your child

I just brought my ten year old daughter a iPod touch and got get a apple id for her does any body have any ideas

You have to set up a new one for yourself and let them use it..
You can set up an account without a credit card by following these instructions.

How do you set the menu button for a playlist?

I have a "Play All" playlist that I want to return to the main menu (when the menu button on a DVD remote is pressed). Right now, it's going to one of my sub menus. I can't figure out why this is happening. Any help would be greatly appreciated.

Thanks for the responses.
My "Play All" playlist is not a button on a menu. It is actually the "First Play" of my DVD. I want the user to be able to hit the menu on their remote and then go to the main menu. What's happening is the menu button is going to a sub menu. I find it frustrating that you cannot set the remote button options for a playlist. If this can't be done, is there at least a way to set my main menu screen as my "top menu"? I don't want to set all of my timelines to the main menu. If I were to set it that way, all of the clips from the sub menus would go back to the main menu (when the menu remote button is pressed).

How do you set different sleep times for different days?

Energy Saver --> Schedule allows you to schedule start/wake/sleep/shut down, but it doesn't provide very fine grained control. Is there a way to set the computer to sleep or shut down at different times on different days, to wake only on particular days, etc.?

AFAIK, Energy Saver doesn't provide the granularity that you're seeking. Launch the Terminal app, copy & paste this command into the window that pops up, hit the return key, and peruse the underlying documentation for the power management setup process:
man pmset | cat

How do you set up the eprint for the photosmart 5514? asking for a proxy to print from the ipad?

I have successfully set up my laptop to print wirelessly for the HP Photosmart 5514, but I am unable to print from my iPad. The message that I receive when I select eprint is to enter my proxy. Could you please tell me what step I must be missing?
Thanks in advance for your help.

Hi,
Most likely your printer does not support AirPrint. But please check to see if your printer in the list:
http://support.apple.com/kb/ht4356
If YES, you can use this to fix
iPad: http://www.apple.com/support/ipad/assistant/airprint/
If NO you have to print using other apps (if applicable) such as
http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
More info from this:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do you set up Logic Pro 9 for transposing instruments?

Similar Messages

Maybe you are looking for