How do you set up multiple IP addresses on a web server?

I have a block of 8 fixed IP address, 5 are useable for websites. I have a netopia router and I would like my server to be able to host several different sites using a secure server. I know you can only host one secure site for one fixed IP address. I have been using one IP address and hosting virtual domains up to now. I don't know how to set the router and the server up to make this work. Everything I have tried has failed. I have tried IP mapping and passthrough but I can only make one IP address work. Not multiple. Any advise would be appreciated.

Since you're looking to host multiple SSL sites, no matter what you do you're going to need to setup multiple IP addresses on your server.
I would NOT recommend running the server at your edge - there are valid reasons for using firewalls and NAT devices. Instead, configure your server with multiple private IP addresses (192.168.x.x or 10.x.x.x, whatever you prefer).
Then, in Server Admin, configure your SSL web sites. Bind each one to a specific IP address.
This is different from your non-SSL web sites, which presumably have 'any' as their IP address.
Then setup your Netopia router to port-forward port 443 on each public IP address to the corresponding private IP address on the server.

Similar Messages

How do you set up multiple from addresses in mail

on my ipad when I set up email accounts, i can enter multiple addresses in the Email field, separated by a comma, which is located on the keyboard far right, second symbol screen.
On my iphone 5 there's NO COMMA that I can find on any of the three Keyboard screens when you're in the Email field.
What's up with that?
I'm running ios 6 on both devices

Beth, I ran into the same issue.
What I did was this:
(1) Go into the Note app and enter your comma-delimited list of email addresses.
(2) Copy the list and paste it into the Mail settings where you tried to enter it.
It works fine that way.
Note however that if you are using the default Gmail settings there isn't a separate field for your email address and username - they are the same. So you will get an error when you try to save. However, if you use the manual setup where there are separate fields for username and email address this will work.
You can even add the extra email addresses to another non-Gmail account and when you try to send you can select the alternate email address.
doug

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you set up and generate address labels in pages?

How do you set up and generate address labels using Pages?

https://discussions.apple.com/message/12924429
Yvan KOENIG (VALLAURIS, France) samedi 17 décembre 2011 23:27:32
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

How do you set up group in address book?

How do you set up group in address book

PINOOTS wrote:
How do I add just 1 name to an already established group?
Select All in the Group column.
In the Name column, find, select, drag and drop the desired entry from the Name column on to the Group in the Group column.

HT201304 How do you set up multiple game center profiles on a single itunes account? Example, my daughter is too young for her own account but wants games on her ipod touch with her own profile. Any help would be great.

How does one set up more than one game center profile on a single itunes account? For example, my daughter is too young for her own itunes account but would like her own Game Center profile to except invites and play games with her friends. Any help would be greatly appreciated.

Maybe:
Multiple game center accounts for...: Apple Support Communities

How do you set up multiple time capsules in my home?

I have one time capsule for my information and my roommate has another. They are in the same room. How do I set them up so our information doesn't get confused?

I doubt you will have confusion.. if they have different names.. then network wise they will be fine.
ie You set up your TC named TCTom / TCJulia.. and the other person has his/her TCHarry / TCHarriet.. then clearly they are different..
You can have wireless issues though. If they connect via the same network.. then use ethernet and turn off wireless. Or make a pact and share wireless on one. ie the TC can be plugged into each other.. but wireless only working on one.. they will both be equally accessible and work equally well.

How do I set up an email address from a proxy server?

How do I set up an email account on mu phone that has a proxy server?

These steps typically resolve the issue:
1. Press the ePrint button on the printer's front-panel screen (top row of icons, far left button), then press "Print Report".
2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

How can you display a dynamically loaded vi to the Web Server?

I am working with LabView 6.1 and the Web Server. I can call a subvi and have it display on a remote machine using a browser with no problem. But what I would like to do is dynamically load and run a vi and have it display on the remote computer using only a browser. I have tried a small example of a front panel that invokes the run vi method (and fp.open prop) on another vi when a button is pressed, but the invoked vi is displayed only on the local computer. Is there any way of viewing dynamically loaded vi's on a remote machine without having a copy of LabView running on it?

If i understand your question correctly, you want to monitor vi that are dynamically loaded on a remote machine without having LabVIEW installed on the machine from witch you want the monitor. I don't think it's possible how ever a good reference book would be Internet applications in LabVIEW. You can find it on BARNES&NOBLE.
Hope i could help

How do you set up multiple users? Netscape use to let me choose which profile to start. Can I do this with Firefox and can I have email linked to each individual user/login? How?

Netscape use to let me choose and create new profiles. after clicking on the icon for netscape i was prompted for which user profile i wanted. can i do this with firefox? also, each user profile was linked with its respective email account. can i do this through firefox as well? I need help. i have tried setting up firefox before and since i couldn't accomplish this i had given up but netscape is so old and most sites cause it to crash, i need a solution. i have 2 main profiles and 2 different email addresses. any advice or help, even not firefox related would be great

Firefox doesn't have the same type of interface for the Profile Manager that Netscape did. You might want to look at SeaMonkey ''(which uses the same Mozilla Gecko code as Firefox has)''.
http://www.seamonkey-project.org/

How do i set up multiple email address to my apple email

I need help setting up a new apple email address.

Launch Mail then from then from the menu bar click Mail > Preferences then select the Accounts tab then the Account Information tab.
Click + under the Accounts panel on the left.
Type in your name, the user name and password then click Create.
Do that for all email accounts.

How can you set up multiple apple ids on one computer

it says something about 90 days

Not sure what you mean about 90 days.
Everyone with an Apple ID should have they own user account.

How do you set-up multiple NT Auth servers per Domain, but one per role

I have a domain with three roles. These roles correspond to subsidiaries of our company, each with their own NT Auth Server. Shouldn't I be able to put in the NT information at the role level and not in the code for the iwtLoginChannel or on the domain Auth pages?
What happens is I cannot authenticate any if I try this. If I try with the Host listed in the HTML for the iwtLoginChannel it works fine.

Roles are used to assign a set of attributes (such as setting user preferences for different applications/channels) to a group of authentication authenticated users. Hence, it is not possible to assign a role, before the user is authenticated.
A solution to your problem is to assign different NT Domain users to different iPS domains as iPS domains are identified using the Gateway URIs.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you set up multiple IP addresses on a web server?

Similar Messages

Maybe you are looking for