How do you set up TC with cable internet?

I know this may sound ******** but if I have a coaxial cable coming out of my wall and the is no coaxial cable input on the TC, how do you set it up without using the crappy router I got from TW cable?  Is there a coaxial cable to ethernet adapter?

but if I have a coaxial cable coming out of my wall and the is no coaxial cable input on the TC, how do you set it up without using the crappy router I got from TW cable?
Suggest that you ask TW to provide you with a simple modem.....not a router. The TC is also a router. You don't need two routers and it just makes things more complicated.
Is there a coaxial cable to ethernet adapter?
No. You need to connect the coax cable to a modem. The modem provides an Ethernet signal to the TC.

Similar Messages

  • How do you connect three things--computer, cable internet and vonage phone?

    I bought and extra cable to connect from the computer to the wireless base thinking this would help out; however, I am still not able to connect wirelessly. I typed in the protocol from the cable internet into the forms that the computer asked for. Am at a loss as to what went wrong. Would like to be able to use ipad and my computer wirelessly in the house while still being able to us vonage. any suggestions?

    Do you have a really long ethernet cable?
    Copyright 2014

  • How do you set a photo with contacts?

    What size and format does the picture have to be to set it with the contact info?

    Hey Olivia280,
    Thanks for the question. Instead of tapping the "+", you'll want to select a list and tap a blank line. See the following:
    Add a reminder. Tap a list, then tap a blank line. You can choose which of your Mail, Contacts, and Calendars accounts is used to save the reminder.
    Reminders - iPhone User Guide
    http://help.apple.com/iphone/7/#/iph88463e18
    Additional Information:
    iOS: Using Reminders
    http://support.apple.com/kb/HT4970
    Thanks,
    Matt M.

  • How do you set up iMac with two seperate iTunes accounts on the same computer?

    My husband and I each have separate iTunes accounts linking to different bank accounts and two totally different music libraries. If I set up 2 administrative users on our new iMac, will it keep our iTunes info totally separate??

    Yes.
    Matt

  • How do you set mozilla firefox with large text?

    When I try to customize my page I only see medium text. I need large text.

    Hello,
    In Firefox, :
    #tap on the three bar menu at the top right of the screen
    #tap settings
    #tap display
    #tap text size
    In there, tap on the bigger "a" to make the text bigger in Firefox, as in the example above it.

  • How do you set up a different ipad on same computer with different itunes library

    I am trying to update a clients ipad (who does not have access to internet at his residence) on my personal computer.  When I open up itunes with his apple ID, I continue to get my itunes library information.  I don't want to mix my information with his information.  How do you set up a different i pad/itunes on the same computer?  What I need to do is update the version of his i pad as his i pad is version 4.2.1.  Thank you

    Create a new Windows user account on the computer.
    (86398)

  • How do you set up usb device (remote for ppt) to work with iPad2

    How do you set up a USB Device (a remote) to work with an iPad 2?  I have the digital camera connector but when I plug the remote in, the device is not recognizable.  We are trying to run a slideshow on the iPad using the remote to advance the slides.  Thus, the viewer does not have to swipe to advance to the next slide. 

    ...I have the digital camera connector...
    Simple answer: no, you can't use that remote with the iPad.
    The Camera Connection Kit (CCK) is only for importing pictures.  It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • How  do you set up with pc

    How  do you set up with pc.

    I set up last year with Win 7. I downloaded Airport Utility from apple.com. I don't recall any difficulty. Wireless is not my forte. Sorry I can't offer better assistance.
    I installed Software Update on the pc to keep software up to date.
    Hope this helps.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

    How do you set a default on the Mac that automatically starts a sentence with a capital letter after a full stop? Thanks guys....

    I use SpellCatcher.  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 

  • How do you use Time Machine with more then one mac

    I just bought a new external hard drive and want to back up my iMac & MacBook Pro using Time Machine. But I do not want to use my airport network.
    I will keep the hard drive connected to the iMac, but want to, as needed, plug my MacBook Pro into the Hard drive to back up.
    Is this possible? Do I have first partition the new backup hard drive?
    Any help is appreciated... Jim

    Ok... I am back again.
    I decided to plug my backup drive into the USB port on the Airport extreme.
    On my Macbook Pro, which I connect wirelessly, I was able to start Time Machine... Time Machine saw the backup drive and did a backup.. Yes it took a long time Anyway all is cool with that.
    My iMac is connected to the Airport Extreme by Ethernet. On the iMac when I started Time Machine, it does not see the backup hard drive. I can see and share the hard drive... works fine. But no luck with TM seeing the hard drive on the iMac.
    Questions is will Time Machine work with a computer that is connected to airport extreme by ethernet. If yes how o you set it up and what might be wrong??
    I might mention that the reason I have the iMac connected with an ethernet cable and not wirelessly is because the iMac does not stay connected well to the internet and when it is connected has a very slow connection. My MacBook Pro is all the way across the house and has a great connection.
    I have guessed the slow connection was because the Airport Extreme sits right next to the iMac and maybe there is some kind of interference.
    Thanks.... any help is appreciated.

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you set up the passkey between the Mac & Palm?

    Hi all,
    I need help with a couple of things relating to bluetooth and Mac;
    a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
    b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
    thanks
    iBook 1.2GHz   Mac OS X (10.3.9)  

    Palm has this to say about the issue:
    'Unable to initiate HotSync operation because the port is in use by another application.'
    This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
    The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
    Unable to initiate HotSync operation because the port is in use by another application.
    Why does this happen?
    Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
    What should I do?
    If you see this error, here's how to correct the issue:
    1. Launch the HotSync application on your handheld.
    2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
    3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
    4. Do this every time you wish to synchronize using Cable/Cradle.
    5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
    6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
    For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
    http://www.palm.com/us/support/macintosh

  • How do you set up two different ipads on one computer ?

    I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system.  How do you set up two different uses on one computer.
    Thanks,
    Dave

    Other options not covered in the article:
    1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
    2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

Maybe you are looking for