How do you set up the airport + time capsule to a win XP and 7 machines?

All my Apple products can connect just fine but none of my windows machines can access wirelessly. I tried different downloads but none of them seem to work any way for me to rectify this?

For those who are running Windows and controlling the Airport Base Station with Airport for Windows. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

Similar Messages

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files? Also, how do I add co-workers to my work time capsule and wife to my home time capsule? Thank you!

You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
You might be better using a real backup software.. superduper, CCC, chronosync etc.
The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

How do I set up my AirPort Time Capsule to connect wirelessly to my VisionNet modem?

I'm trying to get my AirPort Time Capsule to work with my landline phone DSL company. They supply all customers with a VisionNet modem/router. My problem is getting the Capsule to work wirelessly with the VisionNet modem. I want to put the Capsule on the other end of the house so I have internet connectivity all around my house. I have no idea how to do this. Is there anyone out there who is tech savvy enough to help me? Your help and response will be truly appreciated.

It will not work.. Apple routers cannot wirelessly extend other brands..
You must plug the TC into the modem router with ethernet.. and put it in bridge mode. You can then get another apple router, like an express or extreme (or even another TC) to extend its wireless.
This is fairly typical btw if you are thinking apple is being exclusivist.. well they are but the fact is wireless repeater (WDS is normal term), is not a standard and so every company does what is right in their own eyes.
WDS is not cross platform.. you always need to stick to the same brands.. or use universal wireless repeaters. But these are not recommended as they are generally unreliable and have other impacts on the network.
Run ethernet or use EOP (homeplug) adapters to connect the TC to the VisionNet modem.

How can I print via the AirPort Time Capsule on a Windows 7?

Hey,
First of all, I am really inexperienced about all these things. I have a MacBook from 2009 with OSX Lion and a PC Windows 7 x64. I have got a time capsule (https://www.mikepalmer.net/wp-content/uploads/2011/12/apple-time-capsule.jpg) connected to my router
and then another router in my room (probably working as an acces point) to which I wirelessly connect my Windows 7.
The thing is that I can see the printer (HP Laserjet P1005) from my Mac but I don't know how to add it to my windows. On a previous PC I added a printer to the time capsule's IP 192.168.1.2 and printed with a considerable delay that way.
As you can see I don't understand how networks work, how IP's work, or how ports work in this matter.
Any help will be much appreciated!!

Hi PGMLEBL,
I am not familiar with Mac product, the best way is ask the HP printer support for the detail support, generally if we know the printer IP address we can add it through add
a network printer, you may can refer the following third party article to add the printer:
how to install a network printer using TCP/IP in Windows 7
http://www.jmu.edu/computing/helpdesk/selfhelp/win7tcpipprinting.shtml
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

how do you set the airport time capsule as the primary base station rather than as a network client?

The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

How can i use the airport time capsule as a external hard drive?

how can i use the airport time capsule as a external hard drive?

Why do you recommend not place things like iTunes libraries or photo libraries on the drive? It was what I am looking for...
I suggest that you ask the experts over in the iPhoto Support Community about their opinions on placing an iPhoto or Aperture library on the Time Capsule....even if you plan to use a wired connection for your Mac and the Time Capsule.
But, if Terrence Devlin answers, be prepared for a lecture about why you should not ever do this.
If you place the iTunes library on the Time Capsule, be prepared for iTunes to give you messages about not being able to find the library.
In addtion, LaPastenague has the answer for you in a nutshell......corruption problems.
Bottom line....the Time Capsule is for your backups.....not "everyday" files and especially not libraries.

How do you set up the passkey between the Mac & Palm?

Hi all,
I need help with a couple of things relating to bluetooth and Mac;
a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
thanks
iBook 1.2GHz Mac OS X (10.3.9)

Palm has this to say about the issue:
'Unable to initiate HotSync operation because the port is in use by another application.'
This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
Unable to initiate HotSync operation because the port is in use by another application.
Why does this happen?
Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
What should I do?
If you see this error, here's how to correct the issue:
1. Launch the HotSync application on your handheld.
2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
4. Do this every time you wish to synchronize using Cable/Cradle.
5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
http://www.palm.com/us/support/macintosh

How can I set up the airport extreme base station with windows computer

how can I set up the airport extreme base station with windows computer

Hi - you need Airport Utility version 5.6.1 for Windows 7 - go to http://support.apple.com/kb/HT1547 to download it to your computer - the setup depends on what kind of modem you have and if you have another router connected - post back with this info to proceed - thanks

Just had Fios installed. How do I set up the airport?

How do I set up the airport? Its connected to the new modem but blinking yellow. The computer recognizes it.

It is uber simple.
Give the TC to create a wireless network.. same name as the SSID of existing wireless.. same security.. should be WPA2 AES = WPA2 Personal and same password.
Usually auto channels is ok to separate them but if you need to give it a jab.. just use manual channels.. set main router to channel 1 for instance and TC to 6 or 11 for 2.4ghz.. 5ghz is not so much of an issue usually.
Apple has notes here on this setup but you can use different router not just two apple routers.
http://support.apple.com/kb/HT4260

How do you set up the stock and weather ticker on notifications?

How do you set up the stock and weather ticker on notifications?

The next question will be what weather and stock apps will display data in Notifications similar to an iPhone. Sure there are lots of apps available but nothing I found will duplicate the features found on the iPhone.

How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

How do you set up the passbook?

How do you set up the Passbook with the new iOS6 software?

I would highly suggest searching the community before posting in this case since this discussion is currently going on in a lot of threads. Long answer short - wait for your apps to be updated by the developers and then you can link them - as of right now, only Fandago and Walgreens have update.

XBOX ONE. I have the xbox one and the airport time capsule and cant connect to most xbox live games and zero parties. I have 0 experience in all this but somehow was able to change NAT to open but still wont connect. HELLLPPPP

Okay folks, I need your help out there.
So the nerdy side of me went and picked up the XBOX ONE on release day. Its awesome by the way, BUT..... I cant seem to connect to most xbox live games and absolutely ZERO parties. At first I just thought it was something to do with the xbox itself and would eventually fix itself, but i was wrong. After looking into it on microsoft, i found out that it had to do with my NAT settings on the airport itself. I guess apple and xbox are not compatiable for xbox live and it makes it difficult to have an open NAT setting and is a huge PAIN.
I was able to pinpoint one that the airport time capsule was blocking the IPV6 something or another. Anyways, I unblocked that, and reset the modem and time capsule and jumped on the xbox and now have open NAT settings but still cant connect to multi-player.
Upon further searching, i was told to uncheck the UPNP on my time capsule as well, but have no idea how to find that.
I know it seems confusing, but thats the best i can describe it.
tthanks all

Be a long long time before I see an Xbox One.. but whoever told you to uncheck the upnp in the TC.. tell them their dreamin' .. upnp is not support by Apple in any computer or router, never has been.. Apple deliberately wrote their own version called NAT-PMP to do the same thing.. dynamically open ports at the request of an application or client computer.
So there is nothing like that to uncheck.. and as a matter of interest.. there no box to check or uncheck for NAT-PMP either.. since apple do not believe in end user adjustment of settings.. they simply do not exist.
You will have to manually forward all ports required by the Xbox via the TC. For multi-player games you probably need to open more ports than the standard to allow just xbox live. You will need to check the ports required and open them.
OR
Buy a standard vista UPNP compatible router.. and use that.. and simply put the TC in bridge in the network.
I have not seen posts yet about xbox one.. but there are plenty about xbox and ps3 and the fact that Apple really doesn't give a hoot about games consoles.
This is a good basic post for older xbox.
https://discussions.apple.com/thread/5385065?tstart=0

I have 2 macs and 2 PC laptops in my home wireless network. Can I use the Airport/Time Capsule hard drive to back up all 4 machines? I know that I will have to use different back up software on the PCs, but is it possible over the wireless network?

I have 2 macs and 2 PC (Windows 7) laptops in my home wireless network. (The iMac is hardwired via ethernet to the Airport/Time Capsule; the others are wireless connections using Airport). I want to use the hard disk drive in the Time Capsule as a network backup drive for all 4 computers. Is this possible? Could someone help me by telling me how to configure it? I know I will have to use different backup software in the 2 Windows 7 Laptops? Do I need to use the Windows backup software, or can I use a third party program like Acronis True Image? Thanks in advance for the help

It is your fault, pondini.. all your fault.
I read of all the things that go wrong restoring Time Machine backups.. particularly stupid things like mail, photo libraries don't go back.. etc. And looking through the incredible number of issues people have here, when their Mac finally takes a dive how hard it is to restore.
I restored a test hard disk from a TC.. and it takes ages and ages to even make up its mind to start.
I worked in computer support for ages, but not Macs.. so my experience is ghost.. ghost images.. on large commercial server setups, can stream restore to multiple computers at once.. even doing it computer by computer the image is simple as network boot to restore. But ghost went the way of Symantec.. sigh!! And was destroyed.
A product like clonezilla, Free linux boot cd.
http://lifehacker.com/5078397/clonezilla-backs-up-and-restores-your-disks
Can backup a Hard disk in just about any format.. yet to try it on a Mac to a TC.. but I will. Boot from CD.. instead of your lost Lion partition which no longer exists (because the hard drive had to be replaced) and the DVD they no longer give you, and restore the entire hard disk in a couple of hours .. to the exact image at the point you made the clone.. in any format, with any partitions.
My bet is that it will kill TM .. but you could be right.
It is just the prospect of all those permission changes, photos and mail libraries etc that worry me.

How do you set up the airport + time capsule to a win XP and 7 machines?

Similar Messages

Maybe you are looking for