How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

Similar Messages

  • How do you set up repeating alerts for a new voicemail

    how do you set up repeating alerts for a new voicemail

    makblv wrote:
    Please,  Apple, offer this convenience to your loyal customers.  Thank you.
    If you want Apple to know how you feel, Submit your feedback directly using the appropriate link on the Feedback page:
    http://www.apple.com/feedback

  • How do you set up the eprint for the photosmart 5514? asking for a proxy to print from the ipad?

    I have successfully set up my laptop to print wirelessly for the HP Photosmart 5514, but I am unable to print from my iPad.  The message that I receive when I select eprint is to enter my proxy.  Could you please tell me what step I must be missing?
    Thanks in advance for your help.

    Hi,
    Most likely your printer does not support AirPrint. But please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix
    iPad: http://www.apple.com/support/ipad/assistant/airpri​nt/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/​id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mob​ile/Cloud-Services-Supported-Printers-ePrint-Airpr​...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mob​ile/Important-Information-for-ePrint-Home-amp-Biz-​...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you set up Port Forwarding for ARD 2.2 in AEB N?

    Help,
    I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
    How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
    I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
    Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
    Any and All help will be greatly appreciated.
    P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
    Thanks,
    Jim

    Try the following for each AirPort Extreme ...
    AEBSn - Port Mapping Setup
    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    1. Reserve a DHCP-provided IP address for the host device.
    Internet > DHCP tab
    o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
    o Description: <enter the desired description of the host device>
    o Reserve address by: MAC Address
    o Click Continue.
    o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
    o IPv4 Address: <enter the desired IP address>
    o Click Done.
    2. Setup Port Mapping on the AEBSn.
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s): 3283
    o Public TCP Port(s): 3283
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): 3283
    o Private TCP Port(s): 3283
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5900
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5900
    o Click "Continue"
    o Click the "+" (Add) button
    o Service: <choose the appropriate service from the Service pop-up menu>
    o Public UDP Port(s):
    o Public TCP Port(s): 5988
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s):
    o Private TCP Port(s): 5988
    o Click "Continue"
    (ref: "Well Known" TCP and UDP ports used by Apple software products)

  • How do you set up the passkey between the Mac & Palm?

    Hi all,
    I need help with a couple of things relating to bluetooth and Mac;
    a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
    b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
    thanks
    iBook 1.2GHz   Mac OS X (10.3.9)  

    Palm has this to say about the issue:
    'Unable to initiate HotSync operation because the port is in use by another application.'
    This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
    The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
    Unable to initiate HotSync operation because the port is in use by another application.
    Why does this happen?
    Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
    What should I do?
    If you see this error, here's how to correct the issue:
    1. Launch the HotSync application on your handheld.
    2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
    3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
    4. Do this every time you wish to synchronize using Cable/Cradle.
    5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
    6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
    For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
    http://www.palm.com/us/support/macintosh

  • How do you set up the passbook?

    How do you set up the Passbook with the new iOS6 software?

    I would highly suggest searching the community before posting in this case since this discussion is currently going on in a lot of threads.   Long answer short - wait for your apps to be updated by the developers and then you can link them - as of right now, only Fandago and Walgreens have update.

  • How do you set up nested rules for iTunes smart playlist

    How do you set up nested rules for a iTune smart playlist

    Hello \"alice\",
    It sounds like you want to add additional criteria to your Smart Playlists.  I found an article with steps you can use to refine your Smart Playlist.  Step 2 specifically has what I think you are looking for:
    2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
    For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
    To add additional matching criteria, click the Add button.
    You can find the full article here:
    iTunes: How to create a Smart Playlist
    http://support.apple.com/kb/ht1801
    The article says it is archived.  In the current version of iTunes, in step 1 you will select File>New>Smart Playlist.  Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist. 
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do you set up a password for a wireless network when using an Airport Extreme?

    How do you set up a password for a wireless network when using an Airport Extreme wireless router?

    Thanks for the updated information.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the AirPort Extreme icon, then click Manual Setup
    Click the Wireless tab below the row of icons
    Check to make sure that the setting for Wireless Security reads either WPA2 Personal or WPA/WPA2 Personal
    Enter a Wireless Password and Verify Password
    Click Update to save any changes and wait a full minute for the AirPort Etreme to restart

  • HT1424 how do i set up the vpn for the ios

    how do i set up vpn for the ipad2

    Answered here: how do i set up the vpn for the ios

  • How do you set up the stock and weather ticker on notifications?

    How do you set up the stock and weather ticker on notifications?

    The next question will be what weather and stock apps will display data in Notifications similar to an iPhone. Sure there are lots of apps available but nothing I found will duplicate the features found on the iPhone.

  • I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

    You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

  • How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some

    Hi
    As my topic says
    How do you create an installer/bundle for PPro with extension, a plugin (export-controller) and some custom presets?
    Assume you have Flash Builder 4.5, CS Extension builder 2.0, Xcode 4.5.1 running under MacOS 10.8.

    I understand why you need updated running headers in your book. To a sighted reader these serve as a guide to where you are and help you find things quickly.  In addition, if you are exporting your data to XML or HTML from the tagged PDF it would also be important to have these in the proper location. 
    But for accessibility purposes, it doesn't have to be there because the screen reader reads everything in linear order, line by line.  No one is looking at the page.  A user listening to the screen reader read the page is going to hear this heading, just before the actual word itself. So they will hear the first word on the page twice.  It's not the end of the world if it's there, but such headings are not necessary for accessibility unless they are not repetitive and contain information that is not otherwise available.
    So I would say, fine if you need them or want them there, it's just one word. 
    I think you should try exporting your book to PDF (or even just a chapter of the book) and look at the tags panel in Acrobat to see if you are getting the result you want.  I can't tell you exactly what you should do to get those results, you are using a plug-in I don't have. 
    I can tell you I didn't have to add the headers to any article at all, they just automatically export if the other articles in the file are added and you don't select the header style option "not for export as XML."
    You may not experience the same results with your plug-in, but I think it will probably work the same way. 
    Give it a try and best of luck.

  • How do I set an Audio Alert for Low Battery?

    Is there a way to set an audio alert for a very low battery?

    there might be an app for that, but there is no built in feature already on the mac like that.

  • How do you get to the options for export settings with the new quicktime?

    I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

    How do you get to the options for export settings with the new quicktime?
    You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

  • How do you set a calendar alarm for a specific time on the day of the event without it being an all-day event

    Does anyone know how to set a calendar alert at a specific time on the day of the event.
    So that the alert date adjusts accordingly if you were to copy and past it to another date.
    The custom alert function kind of does this, but because it is an absolute alert (not relative) it will still refer to the date you initially set it to when you copy and paste it to another date. So this creates more work where you would have to go and manually change all the custom alerts. I have potential
    Anyone know how to set this kind of calendar alert?
    Thanks in advance

    Greetings: Set the alarm to message you (on your screen) and then snooze it every day for 15 days, or, set 15 separate alarm messages. There is probably an AppleScript somewhere on the web too, try searching that way as well.

Maybe you are looking for