How do you set up the Do not disturb settings?

Does anyone know how to set up the do not disturb settings?

go then to notifications touch the do not disturb and gives u the options from whom is to be allowed and the times

Similar Messages

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

I connected my Canon printer to time capsule, and can print OK. However, I can't get the printer scanner to work. How do you set up the scanner with Time Capsule?

You cannot use USB. It has to be a network capable printer.. is it?? You did not indicate how it is connected.. but by wireless or ethernet then scanning is possible otherwise not.

How do you set up the passkey between the Mac & Palm?

Hi all,
I need help with a couple of things relating to bluetooth and Mac;
a) when I try to HotSync the Palm TX and iBook(OS 10.3.9) using BT, I get an error message saying "can't initiate Hotsync because port is in use by another application'.
b) how do you set up the passkey between the Mac & Palm? I can't work out how to input anything on the Palm at the step where it asks for the passkey.
thanks
iBook 1.2GHz Mac OS X (10.3.9)

Palm has this to say about the issue:
'Unable to initiate HotSync operation because the port is in use by another application.'
This error can occur on the Palm™ Zire™ 72 handheld after setting up a Bluetooth® HotSync® connection. When you configure the Bluetooth application on the handheld for synchronization (or when you set up a Bluetooth connection in the Connections preference screen), the HotSync button in the Writing Area may try to launch a Bluetooth connection, regardless of the connection selected in the HotSync application on your handheld. The HotSync icon in the Writing Area will always try to connect using whatever method was last used. When you set up Bluetooth HotSync, it used Bluetooth, and now tapping the icon in the Writing Area will result in a Bluetooth connection.
The issue arises if you launch the HotSync application on your handheld, and select the "Cradle/Cable" option from the pulldown menu, and then tap on the HotSync icon in the Writing Area. Your handheld will still try to perform a Bluetooth HotSync operation, because that was the method last used. You will see an error message, and won't be able to synchronize.
Unable to initiate HotSync operation because the port is in use by another application.
Why does this happen?
Because your handheld was set up for Bluetooth, tapping the HotSync icon in the Writing Area should launch a Bluetooth HotSync. But if you select a different method in the HotSync application, your handheld will try to connect using that method as well. The HotSync application is unsure which method to use, and you will see the error message.
What should I do?
If you see this error, here's how to correct the issue:
1. Launch the HotSync application on your handheld.
2. In the pulldown menu at the center of the screen, choose the connection method by which you wish to synchronize.
3. Then, instead of tapping the HotSync icon in the Writing Area, tap the large onscreen HotSync icon in the middle of the HotSync application screen.
4. Do this every time you wish to synchronize using Cable/Cradle.
5. Whenever you want to synchronize using Bluetooth, exit the HotSync application and tap the HotSync icon in the Writing Area.
6. This will allow you to keep multiple connection methods for synchronization, and the flexibility of alternating between them.
For more information on such issues, perform a keyword search here, in the Palm Macintosh Support area:
http://www.palm.com/us/support/macintosh

How do you set up the stock and weather ticker on notifications?

How do you set up the stock and weather ticker on notifications?

The next question will be what weather and stock apps will display data in Notifications similar to an iPhone. Sure there are lots of apps available but nothing I found will duplicate the features found on the iPhone.

How do you set up the alert for FaceTime with sound

How do you set up the alert for FaceTime with sound?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
 Cheers, Tom

How do you set up the passbook?

How do you set up the Passbook with the new iOS6 software?

I would highly suggest searching the community before posting in this case since this discussion is currently going on in a lot of threads. Long answer short - wait for your apps to be updated by the developers and then you can link them - as of right now, only Fandago and Walgreens have update.

How do you turn on the do not track feature?

According to an article in USA Today, Firefox has a "do not track" feature that keeps third parties for knowing what sites I visit. How do you turn this on?

Note that selecting that ''do-not-track'' setting will only make Firefox send a specific HTTP header (DNT=1) to a web server.
It is up to the server to do something with that request.
[http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > Advanced > General: "Tell web sites I do not want to be tracked"
* privacy.donottrackheader.enabled -> Header: HTTP_DNT: 1
* http://blog.sidstamm.com/2011/01/opting-out-of-behavioral-ads.html
* http://blog.sidstamm.com/2011/01/try-out-do-not-track-http-header.html
* http://browserspy.dk/donottrack.php

How do you get to the options for export settings with the new quicktime?

I'm having trouble with the new quicktime pro. I'm trying to export a video with specific settings when exporting. It seems that in this version of quicktime you export and the only options i get is how to format : for ipad/pod/phone or 480p which is not what I want I need to change the settings to make my video 480x360 and fast start for web. can someone help

How do you get to the options for export settings with the new quicktime?
You don't Use QT 7 "Pro", GarageBand, a video editor app, or a third-party app like MPEG Streamclip all of which can access user conversion settings.

How do you set/change the default alarm TYPE in iCal?

I like to think I'm a power user, but this one I just can't figure out. The question/problem is: How do you sent the default alarm TYPE in iCal? The problem is illustrated in the picture below in the blue circled area.
Specifically, whenever I set a new event in iCal, it defaults to this window with the default alert being "Default (1 hour before)." The one hour before is fine, but the problem is, WHAT is the default? It seems to be just a sound, but that's not good enough to actually alert me of anything.
The goal I'm trying to achieve with this post is to determine how to CHANGE the "default" new event alert FROM "Default (1 hour before)" TO one of two alerts that I actually find useful: I want MY "default" new event alert to be either "email" to the primary address, OR, "Message with Sound".
Any ideas, folks? Thanks.

Understand. I am in the edit mode for my contact. I see all the contact info. There is no right click or other means to change the DEFAULT address that autofill uses (it also is first to appear if I type my name in an e-mail). For instance for a group e-mail you can change the default addresses of each contact by control-clicking on the group in Address Book. I can't seem to make the default change in my v-card.

How do you set up the paypal standard gateway to work without a web form?

I must have missed a step. I have this site set up and the paypal standard gateway does not work with a web form, but works with shopping cart. Does that mean I need to disable the web form page and use something else to check out? How do you do this? The BC help page on this stops at this point in describing what to do.

For those who are running Windows and controlling the Airport Base Station with Airport for Windows. Apple just came out with a firmware update for Airport Extreme (7.7.2). It so happens that this Firmware version requires Airport Software version 6.3 or newer. The Windows version only goes as high as Version 5.6 or so. I was also told that Apple is unlikely to upgrade this software. To make a long story short you need to control (Configure) your Airport Base Station with an iMac, or an iPhone or iPad with the Airport app. This solved my problems. Good Luck :)

How Do you set up the IPod Touch to your pc home computer - when it asks for a password - what password is needed?

I just received an IPod Touch for a gift. Have a home computer through Charter. Have wi fi with pc at home. I am unable to get the Ipod to work with the pc and wifi.
Wi fi is on - At choose a Network - Have the option of t.dillow and other.
When i choose tdillow it asks for a password. What password is required?
I cannot get my email either.
How do I get the IPOD to connect to my wifi and enable to use mail through Yahoo account?

You need the password for your network/router. Sometime the dfault password is on a sticker on the router. As the person who controls/set up the router.

HT201250 How do you set what the Time Machine window shows?

I just bought a Time Capsule and started using Time Machine. The window that appears when selecting "Enter Time Machine" shows the desktop, but not the Hard Drive. I want to see the contents of the HD, not the desktop.

erickfrombloomfield wrote:
I thought Time Machine made a clone of my boot drive.
TimeMachine copies your entire boot drive, but it's not a clone. Clones are near 100% exact copies of your boot partition.
TM every so often updates with a "state" representing a day, it only saves the changes between states so this way it's not making your external drive full in a couple of days.
You go through the "states" to pick the copy of the file you want to restore with or the entire drive.
So that is not true?
TimeMachine is not a clone.
Aclone is a exact image of your boot partition, just like you picked up all your software and placed it on another drive.
Clones can be updated, and now even save the "states" between clones, but then it's not a clone anymore as it's not a 100% copy, but a bootable clone + backup.
How can I make the Time Machine copy on the Time Capsule bootable?
You can't, a TimeMachine can only restore, not bootable although I hear it's possible to boot to restore only.
Or how can I make a clone on Time Capsule?
You don't. The softwre and technology is not compatbile.
If you want a clone be able to boot from it, and see everything on the drive like any other, then you need to use a new blank drive and Carbon Copy Cloner, then it's a option key bootable clone drive.
TM or TimeCapsule can't do this, it's a backup system, not a clone.
If you want to learn more about TM you can visit this site
http://pondini.org/OSX/Home.html
I don't use TM at all, it's for newbies mostly. It takes a long time to restore with as it has to go through all the states to grab files.
Power and seasoned users use clones so they also can boot from them, make more clones or run the computer if the drive dies etc.etc.

How do you set up the ipod touch warranty?

I'm getting the new iPod touch soon so I wanted to know ahead of time how to set up the warranty.

The warranty goes into effect automatically from date of purchase.
You can register your iPod here > Apple - Product Registration - Welcome

How do you set up the tracks, Dual Layer project

I have a dual layer disc and project.
The breakpoint will be in the middle of one of the programms. But i don't want that.
Now i want to had a 'hidden' track on layer 0 (so it becomes larger than layer 1)
But how does dvdsp4 calculate whitch tracks goes on what layer?
I've tried to put the hidden track in the outline between track 1 and track 2. But watching dvdsp4 muxing he doesn't put the hidding track between track 1 and 2, but totally at the end.
p.s. the hidden means it doens't have a button on the menu, so it isn't acceseble for people. it's just there to make layer 0 larger than layer 1.

Since you are using DVD SP 4 go to the VTS view in the outline tab. (Press F3 Key, click on outline view, and you will icon at top right in that section [still of left side of the screen] where you can toggle the screen from the list you see to somehting that will list VTS) A pciture of what I am describing is on Pg 589 of the PDF manual.
Drag the "Hidden" so that it is between the VTS for track 1 andd tracks2 (and make sure that there are markers on it (a few at least) so that (hopefully) there should be a layer break in there.

How do you set up university email on mail settings?

I can't set up my university website on mail settings i don't know what imap or pop means Help please

POP and IMAP are two different kinds of e-mail protocols. You will need to ask your IT department help desk for specific instructions. If you take your iPad to them, they might be able to help you set it up.

How do you set up the Do not disturb settings?

Similar Messages

Maybe you are looking for