How do you set up your server to use Adobe Drive (alfresco to Hyper-V)...
Hi,
We have been gradually using Adobe Illustrator CS6 in a team environment and, after having files on the server, found that we were stepping on one another i.e. losing work. The forum explained the pro's and con's of this arrangement; Adobe drive seemed to be the answer. However, there are constraints with this. The terms hyper-V and alfresco have come up, and getting the two to work is in question. Certainly there are companies out there who are using Illustrator in a team environment and I was wondering how you do it. Thanks so much.
Hello Julie.
Your junk filter appears to not be working properly. Try this first:
1. Go to Preferences > Junk Mail and disable junk mail filtering.
2. Quit Mail, then open it again.
3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
4. Reset the junk filter database (Preferences > Junk Mail > Reset).
Similar Messages
-
How did you set up your spouses account?
How did you set up your spouses iOS device, iCloud account, etc? And what do you recommend?
My wife and I have one iMac we share (with two login accounts - so basically two computers), an iPad, and two iPhones. Since there are certain things we really like to share between accounts (PhotoStream, Find My iPhone, Documents/iCloud Drive), we've shared the same master iCloud account for the last few years. This has had some drawbacks with things we *don't* want to share, such as we now have to sync our Safari bookmarks, and our keychain/logins for personal websites sometimes overlap, or the "Recent Contacts" shows the last people my wife contacted, not mine, etc.
The pros have outweighed the cons, but it has always left me wanting.
And now that things have changed a bit with iOS 8 and iCloud Drive, Handoff, and Family Plan. I figured now would be a good time to revisit our setup and what would work best for our family. (Of course, this might be a bit premature, with the looming new Photos App from Apple coming, that might make us buy storage in iCloud, but if you have any forethoughts into that, I'd appreciate hearing them!)You may wish to look at alternatives to sharing the items you've been sharing. For example, you could use shared streams instead of my photo stream, in many ways it might be better, that way you share selected items rather than everything. You really don't need to share Find my phone, you can still use find my phone to find a device associated with any account if you sign in with that account, if you want to see where someone is find friends is a much better choice. You can also share links to iWork documents using iCloud document by document.
-
How do you set up your Configuration Manager client when Imaging?
OK everyone we got an issue that we need to take care of sorry if this seems like a dumb question but we cant seem to make this work. How do you set your configuration manager client when you deploy your image(s)? I created package and pointed
it right to the config manager install directory just like the recommended one for USMT but it does not seem to work. I also tried to leave it blank but it appears to be mandatory.. So my question how do YOU get it to work for your areas?
Thanksthat might be the problem I dont see a "Microsoft Configuration Manager Client 5.0 All" anywhere. We threw something together that points to:
\\Server.Domain.com\SCCM_Install\SMSSETUP\CLIENT
What is happening is this.
Have a task to deploy Windows natively to the workstation
Drop applications to the workstation
do updates
capture back to server
All it does is
Drop the OS down
copy the Agent files
join to the domain
reboot
sit
sit
and sit -
How do you find out your "Server"?
I have no idea what my server is, or how I can come up with it. Help?
Your "server" for what purpose? For Podcast Producer, as the footer note implies?
If it's Podcast Producer, then it's an OS X Server system that you're running on your own local network, and that's configured with the Podcast Server software. (If you're not already aware of the difference, OS X Server is a different version of OS X, a package with added features and capabilities that's installed onto the OS X package.)
Here's the Apple Podcast Producer documentation, which goes into some detail on setting up and using Podcast Producer.
Or maybe you're asking about Mail and mail servers, as is a common question around the forums? If it's mail that you're configuring and that you're puzzled with, then you'll need to check for the configuration details with whomever is providing you with your mail. That provider might be your local Internet Service Provider (ISP) and the ISP's mail servers, it might be Apple with iCloud services, or some other provider. You could identify your mail ISP, and somebody could then point to the details of setting up mail with that ISP.
There are may other servers around the network beyond Podcast Producer and Mail, and for various different purposes. -
I am trying to understand how I can set up a series of pages for each of several subdomains such that when you view that web page it shows on the subdomain without the subdirectory name. Essentially I suppose I am wanting to point the subdomain at a folder...
For example I have my main site with the domain mysite.com.au and have 3 subdomains sub1.mysite.com.au, sub2.mysite.com.au etc... I want to then store the pages relating to each subdomain in their own subdirectories /dir01, /dir02 and /dir03 or otherwise named as something appropriate.
What want is to I have the page page1.htm in each of these subdirectories such that I can view the page with the url "http://sub1.mysite.com.au/page1.htm" and have the url displayed as such once loaded rather than having to enter http://mysite.com.au/dir01/page1.htm
Is this a simple or complicated process to put in place?Hello Julie.
Your junk filter appears to not be working properly. Try this first:
1. Go to Preferences > Junk Mail and disable junk mail filtering.
2. Quit Mail, then open it again.
3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
4. Reset the junk filter database (Preferences > Junk Mail > Reset). -
Hi
I just want to know how you can set up your iphone so when you connect to another computer you have to enter a password before accessing the information? My friend connected hers to my computer and it asked for a password so I know its a function.
I have a phone password enabled so its not that, any help would be great.The Passcode Lock prevents syncing the iPhone with iTunes or accessing any data on the iPhone when the iPhone is connected to another computer different from the computer being used for syncing the iPhone.
-
How would you set up your hard drives if you had these to work with
So I currently have :
1 internal 1 Tb 7200 HDD
1 internal 300gb 7200 HDD
This is all im using right now, but I also have a 3 TB external that I use to store media and also edit from. I was bringing the footage into the internal drives to edit from but space was growing thin.
I bought other drives to redo my entire hard drive set up while incorporating the old ones as well
1 2 Tb internal 7300 HDD
2 250gb SSD (They are however not the same brand.)
If someone could please give an opinion on how they would set these up from scratch that would be swell, or you can also recommend adding in another drive into the mix as well.ok, the internals Im using now i can't get in to see the model numbers, but for the others they are;
Seagate Constellation ES.3 ST2000NM0033 2 TB 3.5" Internal Hard Drive - Newegg.com
Kingston SSDNow V200 Series SV200S3/256G 2.5" 256GB SATA III Internal Solid State Drive
SAMSUNG 840 EVO MZ-7TE250BW 2.5" 250GB SATA -
My wife and I each purchased the iphone 5 and we share an itunes account. How do I sync our iphones to our MacBookPro so we each have our own iCloud account (contacts, calendars, etc.)? We want to be able to share the itunes music on our computer.
If you are sycing your contacts and calendars with iCloud, don't sync them with your computer using iTunes. If you sync with both iCloud and iTunes this will cause duplicates. If you want to keep your contacts, calendar, etc. separated rather than merged, be sure to set up separate iCloud accounts on both phones using different Apple IDs. You can continue to share the same Apple ID for purchasing music, apps, etc.; it does not need to be the same as the ID you use for iCloud, iMessage or other services.
In terms of syncing your music and other non-iCloud data with the same computer, this article will explain different options depending on how you want to set it up: http://support.apple.com/kb/HT1495. -
How can you set up your iphone 4s to show 2 seperate email address but that are on the same domain
I have 2 email address linked to me on Outlook. one is a personal one for me and one is a group email address but both on the same domain.
I have my own inbox set up on my iphone and i have tried to set up the group email address on my iphone, but because the credentials are the same, it is only bringing through my emails and not the one for the seperate email address - is there a way round this?
Many thanksWhat do you mean "the credentials are the same"? The part of the email address before the @ should be different. If not then you do not have two different email addresses.
Just go into the mail settings and choose add account. Enter the info for the second account. It won't matter that your incoming and outgoing smtp server are the same. If it did how could millions of people all use Yahoo or Google?
If what you really have is one email account with a rule set to send specific emails to another folder, someone else will have to help you. -
How do you set up your system to compile servlets?
I can't compile my servlets. I need the javax.servlet packages. I went to java.sun.com/products/servlet but couldn't find the servlet SDK. Is it now all wrapped up in the J2EE SDK?
So I downloaded the J2EE beast and put j2ee.jar in my C:\JDK1.3\jre\lib\ext. Now I can compile my servlets fine from the command line. But now Tomcat doesn't work at all. Even when I try to run the servlets that are supplied in the examples with Tomcat, I get the following errors:
Internal Servlet Error:
javax.servlet.ServletException: sun/tools/javac/Main
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at org.apache.tomcat.core.ServletWrapper.doService(ServletWrapper.java:405)
at org.apache.tomcat.core.Handler.service(Handler.java:287)
at org.apache.tomcat.core.ServletWrapper.service(ServletWrapper.java:372)
at org.apache.tomcat.core.ContextManager.internalService(ContextManager.java:797)
at org.apache.tomcat.core.ContextManager.service(ContextManager.java:743)
at org.apache.tomcat.service.connector.Ajp12ConnectionHandler.processConnection(Ajp12ConnectionHandler.java:166)
at org.apache.tomcat.service.TcpWorkerThread.runIt(PoolTcpEndpoint.java:416)
at org.apache.tomcat.util.ThreadPool$ControlRunnable.run(ThreadPool.java:501)
at java.lang.Thread.run(Thread.java:484)
These errors disappear if I remove j2ee.jar
So, how shoudl I configure my system so taht I can run Tomcat and also compile my servlets from the command line ? Also, do I really have to keep restarting Tomcat each time I want to reload a servlet ?To set up Tomcat, here's what I'd do.
1) Remove j2ee.jar from C:\JDK1.3\jre\lib\ext
That will cause more headaches than you can imagine.
2) Add servlet.jar to your classpath. Servlet.jar is located in lib under your tomcat directory. ( so, something like C:\jakarta-tomcat\lib\servlet.jar )
3) Make sure that you have your JAVA_HOME environment variable set to C:\JDK1.3. If this is not set up correctly then you will get the error: sun/tools/javac/Main not found...
Hope that helps.
Anne -
Remote...How can you set the your amplifier to be the default volume?
Does anyone know how to set your amp to be the default volume control without have to switch between devices to change the volume?
Can you have 2 devices on the screen at the same time. Like cable box and the amp?
i've had other sony remotes that would do it.
Solved!
Go to Solution.I think sony should keep working on improving universal remote app.
here's little sugestion from me allow sort off split screen option on 1 side one remote and on another side another remote with seperate scrolling perhaps.
or tiny area dedicated to just program and volume buttons that can switch while having main remote on having tiny volume remote in tiny area on screen from any remote you choose like amplifier.
anyway maybe this is already possible anyway.
using main remote app and mini remote app at same time.
having tv remote as normal remote and small mini app remote having amp controls aka volume
Just tested works fine can even hit both power buttons at same time will power on my tv and amp at same time no problem. -
How do you set up your iPhone to send video signal to a TV. Is it done automatically?
Is the phone automatically set to send video through a docking station into the receiver and into the TV?
You need an Apple TV to do this. If you have one, play a video on your iPhone. Next to the three control buttons will be an icon that looks like a rectangle with a solid triangle in front of it (kind of like an upside-down envelope). Press it. The video will play on your TV. You can do this with videos and many games, as well as your music. For games and music:
Press the home button twice to get the app tray to appear
Swipe the tray all the way to the left to where you see the music icon and controls.
Besides the play controls and music icon there will be another icon that looks kind of like an upside-down envelope. Press it. The video will start playing over the Apple TV.
Good luck! -
How do you set up your new version of PSE10 with a new MAC?
What are the first steps you do when you install a new version of PSE10? I had some settings on my PC (already deleted it and could maneuver around, but I can't figure out how to do this on my MAC - HELP!!!
I am trying to import elements/photos into my projects, and used to be able to open a window and drag it into the project. I found out I can drag it into my project bin, but not directly onto my project workspace, and then into my project or can I?? Does it have to do with setting up cascading my files, or anything like that?
I am also having a hard time trying to resize my elements. Keep getting a message that I cannot do anything because pixels are not selected (something to that effect) I can resize right after I put the element into the project, but it seems I cannot go back to it (there are no 'dotted' lines around it anymore) and I get that message.
Also when I pull anything into my project it goes to the top toolbar in my project. I'm very frustrated with this all!!!Sorry you're having trouble. When you say "import" do you mean you want to put things into the organizer or just open them in the editor (for future reference, opening a photo isn't importing it)?
Where are you dragging from? If you're dragging from the desktop, in recent mac versions you can drag an image into the main workspace only if there isn't a photo already open in the editor. That's just how adobe did it.
Also when I pull anything into my project it goes to the top toolbar in my project.
Sorry, don't understand what you're saying here at all. Can you explain in more detail? -
How do you set up your iphone?
Right, so I got a new Iphone 4 and it was bouught unlocked from apple. My iphone sim is O2 and i had to switch my number over to this because i thave a contract. I have put the new sim in the phone, restarted it and connected it to itunes. When i sonnect it to itunes it says " The SIM card inserted in this Iphone does not appear to be supported." Then there is a whole paragraph about compatible sims... so when you pop the sim out it says no SIM card installed, Insert a valid Sim with no PIN lock to activate iPhone. So I went to the O2 store and they changed my SIM and the whole thing isn't any different. If anyone else has a clue please help me, I'm aweful with technology!
paulaneedshelp wrote:
its 100% unlocked.. i havent fully activated it because it wont let me get that far.. it shows wifi connections and i have typed in the password for my home internet and the cirle at the side shows its loading although its been like that for aboout an hour.. so i clicked connect via itunes, pluged it in and it "The sim does not appear to be supported..." do you think I have to wait a few days until the sim is fully activated?thanks
Look at your receipt. If it says "unlocked" it is an unlocked phone. If it doesn't activate call or visit the store where you bought it. If it was sold as unlocked there should be no waiting period.
You can try connecting it to iTunes and clicking the "Restore" button on the Summary screen. If it wasn't unlocked in the store, but is authorized to be unlocked, that will unlock it. You should get a message after the restore that says "Congratulations, you phone is unlocked!" When connecting be sure to use a USB port directly on the computer, not a hub. -
How do you set up your spam filter?
Greetings,
I have been fiddling with my spam filter for some time now and I still can't get it to work really good. I use the normal "Exempt if sender is in addressbook & Sender is in previous recipient but NOT "using my full name" because that seems to put everything in spam. I use the toggle "IF ALL CONDITIONS ARE MET". I also add the line "if message is junk mail" then move to trash.
The above does work but not real great.
Furthermore, I made up some more rules such as subject lines contain doctor etc and they work better.
Can someone post what they do in their basic junk mail filtering and custom rules to help me out? Also, when a piece of junk mail ends up by mistake in the junkmail box I click "not junkmail". This never returns the mail to the correct box and just sits there and I have to manually drag it. Is this correct?
//CheersHello Julie.
Your junk filter appears to not be working properly. Try this first:
1. Go to Preferences > Junk Mail and disable junk mail filtering.
2. Quit Mail, then open it again.
3. Go to Preferences > Junk Mail, enable junk mail filtering, and configure it however you wish -- I recommend you to leave it at the default Automatic settings.
4. Reset the junk filter database (Preferences > Junk Mail > Reset).
Maybe you are looking for
-
Trouble to download free issue on the App Store
We successfully published our multi-issue version of ffw MAG (http://itunes.apple.com/us/app/ffw-mag/id417263570?mt=8) and launched the first edition in February. However, this month, when we uploaded the 2nd FREE issue (via bundler), although the
-
Hi Guys, I have a scenario where I need to use activity with Products. I looked at the standar transaction 'Business activity with products' but I do not see any tab page to enter products. Can anyone assist me on how to use/create an activity with p
-
Display Item cleared when using 'Enter-Query'
Hi all, i am going to develop a multilanguage application with very special heading texts using display items for these headings. BUT- if I press EnterQuery, they are cleared also. How can I restrict cleanup of these display items used as headings ?
-
Auto discovery between forest trust.
HI, We are merging to a company and set the forest trust. We are going to export our mail to their exchange and remove our exchange server. We are login to our Domainold.com and currently outlook2010 clients are looking for our old domain exchange.
-
Dear All, Their is a requiement from the bussiness side that while placing a return sales order the 'sales group need to be mandatory'. This is with the view that while placing the returns order the sales group do not maintain the data and bacause of