How do you set x-priority header on process generated mail ?

Hi,
I don't see anywhere under the 'Task Notification' section of the LC ES admin UI where one can set the priority of the email. We need some of these to be sent out with a high priority. I also don't see anything in the task's properties in the ES workbench.
Techincally, I know it involves setting a mail message header along the lines of 'X-Priorty' with a value of '1'.
Does anybody know how to do this ?
Thanks
Dan

Sorry, you can't.
Same as http://forums.adobe.com/message/2192283#2192283
Jasmin

Similar Messages

How do you set-up a hotmail email address in mail

how do you set-up a hotmail email address in mail?
I cant seem to add it. any ideas why it cant connect to the server? what server address should i be using?
regards
Brendon

Hi bmuur,
I also had the same problem.
I clicked Microsoft Exchange and kept trying to add my hotmail account that way but it kept asking for a server address for it to work.
If you go into Internet Accounts and instead of clicking Microsoft Exchange scroll down to the bottom of the list and click Add Other Account...
It will ask what sort of account you want to be created and I selected Add Mail Account and clicked create.
Enter your full name, hotmail email address and password.
I then clicked create and it worked for me.
Hopefully this solves your problem.

How do you set the priority for active windows?

When I open a download file for an application from Safari, it opens behind the active window. How do I set the priority so that the download file window opens on top of the active window so I don't have to move a window to find it?

How are you opening it? From the "download" list?

HT201320 how do you set up and exchange account for google mail

how do you set up and exchange account for google mail

If it's a free gmail account, you don't. Google no longer permits free accounts to be set up using Exchange Active Sync. Only paid google apps accounts can be set up as Exchange accounts.

How do you set up priority queueing on a 3400 metro switch?

running IOS 12.2(40)SE. This seem to do strict priority queueing only which means that that queue will be serviced until it is emptied, then other queues will be serviced.
We will be pumping lots of voice calls through a few of these 3400s on a metro fiber ring and I need to apply the appriopriate QOS for voice. I'm familiar with LLQ in the router world and autoqos in the 3750/3650 switch world, but not with this switch.
Is there a white paper that speaks directly to VoIP on the 3400? The QOS section of the config guide doesn't help when looking for config examples for voice except to state that voice can be mapped to the priority queue, but it is not LLQ based.
I don't want to police voice because the potential of dropped packets could affect all calls, but I need to make sure that voice traffic gets priority over all else - without starving out the other traffic.

I understand that - and thank you for responding. However I am extremely leary of policing voice traffic because any dropped packets will affect voice conversation.
Maybe I should set up a policer that is much larger than the total amount of voice traffic I ever expect to have on the link. Say I'll have a possible 100 G-711 calls at any given time. In the LLQ world I'd carve out a priority queue of 10meg to insure all those calls get prioritized. In the 3400 world should I police say at 12meg?
What I'm not clear on is the concept of strict priority queueing - that that queue will be serviced at the expense of all other queues whenever there is traffic in it. Would I expect there always to be voice traffic in the queue if the link is a gig link, and 10mb of voice traffic is going through that queue constantly? Or will the gig interface pull those packets out of the queue so fast that all other non-priority traffic will get transmitted from the other queues just fine?

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag. How can I set default priority to low = no flag?

The default priority setting in Mail is set to "normal" and is causing emails I send to be sent with red priority flag.
I have found the flags to reduce the priorty level manually to "low Priorty", but how can I set default priority to low = no flag?
Thank you for advising,

Try deleting the .plist.
Quit the application.
In Finder hold down the option/alt key while selecting the Go menu item. Select Library. Then go to Preferences/com.apple.mail.plist. Move the .plist to your desktop.
Open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer ones.
If you want to make your user library permanently visible, run the below command in Applications/Terminal.
chflags nohidden ~/Library/
You will need to do that after any updates.

How do you keep the browser heading from showing?

How do you keep the browser heading from showing in the
output? I did this once but can't figure out how!
Thanks in advance,
Rosie

You asked...
quote:
Is there a way to shrink the application you're capturing so it
fits within a given capture window rather than requiring scrolling,
or would I have to go back to the application developers for that?
(I realize that would shrink the size of everything on the screen,
but in some cases, that would be worth it to be able to show a
window without scrolling.
If, by "shrink" ... you mean by using the AppSizer, the
answer is "not really". You can configure AppSizer to a defined
size, then with the mouse pointer double-arrowed on the "edge" of a
window, right-click and your window-size selections will appear in
the AppSizer "list" (that you set up) and can be selected there.
But there is no re-scaling of the window contents, if that is
what you mean, so the smaller window may now require scrolling.
But keep in mind that if you use the recording option for
"Software Simulation" > "Custom Size", you can then snap the
application window to that size...

How Do You Set Mail To 'Manual' ?

Never had problem with iPhone until yesterday. I am not receiving 'push' e-mail anymore. I did not do any changes to the iPhone at all. Any e-mail now I have to go to inbox and click on the curved arrow symbol at bottom left of page in order to load the waiting e-mails. In a different posting someone mentioned to test 'push' function by setting e-mail to 'manual' and then sending your Yahoo account an e-mail from your computer (I assume using a different e-mail service). In the 'settings' menu for 'mail' I do not see where you set for 'manual'. How do you set mail to 'manual' setting? And do you think I should just RESET the iPhone (using the iPhone or hooking it up to iTunes on the computer to RESET) ?

I have no other e-mail accounts set up. Anyway I did RESET my iPhone (using the RESET button on the iPhone) and all is well again (how long I do not know). My e-mails are being 'pushed' again so that I can see from the main menu the little red dots (with the numerals inside) showing how many e-mails are waiting for me. I love this feature. I had 'push' e-mail on my ex-Blackberry. BUT, I do not see the AUTO-CHECK anywhere. I am heading over to the Apple Techies at my local Apple store to ask them about this missing AUTO-CHECK. I have a feeling you need two account set up on your iPhone for this feature to appear. I could be wrong. Thanks, everybody........

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you Set up a Family Pack sub-account

how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
Denis

Thanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis

How do you set up separate facetime accounts under one apple id

how do you set up separate facetime accounts under one apple id

This is possible, but I haven't found any official Apple topics about it, so I will share a nice web article about it on a Mac fan website:
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Hope this helped!

How do you set up iphone 5? everytime i put it into the computer it erases all my contacts how do i stop this and get my contacts back?

how do you set up a iphone 5 everytime i conect it to the computer it erases all my contacts how do i put them back on my phone and stop the computer erasing them again?

Are your contacts not on your computer?

How do you set up two different ipads on one computer ?

I purchased a new ipad for my wife and want to get her started but we both use one imac as our desktop system. How do you set up two different uses on one computer.
Thanks,
Dave

Other options not covered in the article:
1) You can plug both in under the same computer username and same iTunes Apple ID and give each device it's own name. You should be able to manage them as separate devices with different media, apps and screen layouts. All of your media would be in a common pool, though.
2) Under one computer username, you can login and logout of two different iTunes Apple IDs. This option is cleaner with two computer usernames but it can be done with one.

How do you set x-priority header on process generated mail ?

Similar Messages

Maybe you are looking for