How do you set Zen sleek drive space through softwa

OK,
So I have a Zen sleek and I accidentally cracked the screen. No problem, used a wire remote and still good. Except the jack on the Zen broke and it doesn't respond now. So I figure I'll use this as a glorified portable hard dri've, except the manual says I need to set the size through the player, which I can't see what I'm doing. Does anybody know how I can do this through software? Any suggestions would be appreciated.
Cheers,

I just wanted to close out this question.
I never received a clear answer but in the end I don't need to use the function. My concern was that a new WD1001FALS would be louder than the OEM 320GB HDD in my iMac to the point that I wouldn't be happy with it. Not wanting to trade speed for quiet I passed on the Green caviar and went for the Black. After living with it for several weeks I can say that it is very quiet and while I don't know if it's measurably louder than the old drive, it's not enough for me to notice (and I'm pretty picky).
So, I'm happy with the drive as-is, case closed.

Similar Messages

At the end of test, how do you set the DAQ driver output to zero.

I'm a new LabVIEW user,I'm reviewing an existing program that has a clearall.vi which supposed to set the DAQ output 6025E to zero volts at the end of each test. But after turning the power supply off to UUT, the Vcc on UUT still measures between 2-3.5v I checked some of the output Port A-C and DIO still puts out 5.1v. I checked the output port bit status in the program and says it sets at zero logic. Confused and thanks for your help.

Hello,
Unfortunately, I am unfamiliar with the clearall.vi. If it was not a VI that was created by National Insturments, then we will not be able to support it. If it was, maybe you could direct me to where I could find it.
What it sounds like you want to do, however, is to ensure that your digital outputs are placed at 0 when your application completes. Are you using a digital I/O device, which one? When a digital line is written to, it will retain that value untill it is written to again or reset. Therefore, I think what you want to use is the Device Reset.vi. This VI will return your digital lines to their default value. The knowledgebase titled "What is the State of My Digital Lines After Performing a Digital Output Operation?" and located http://digital.ni.com/public.nsf/websearch/E309E3FCC758DB1586256C8600702CE1?OpenDocument talks more about this.
By the sounds of it, you have your digital lines from your device connected to the Vcc line on your UUT, and that a voltage is still being provided even after no power is supplied to that unit. What you may want to do, just as a test, is to manually tell the device to write a zero, and then measure the same readings that you currently are to compare them.
Post back to this forum if you have further questions after reading this discussion.
Sincerely,
Jared A.

How do you display the capacity/free space for the hard drive......

How do you display the capacity/free space for the hard drive on the desktop, under the hard drive icon.... I have seen this done, but I am not seeing any options to do so.... thanks.

View, Show View Options…, Show item info checkbox.

How do you set a security password to control access to an external hard drive?

how do you set a security password to control access to an external hard drive?

The only way to reliably protect data, especially on an external hard drive, is to encrypt it. Permissions don't have to be respected. One way to encrypt data is to create an encrypted sparse bundle disk image with Disk Utility. See:
http://support.apple.com/kb/HT1578
(Be sure to use the 256-bit encryption.)
Alternately, you could use some whole-disk encryption, though I have no experience with any of the software for doing that. You could try the following:
http://www.truecrypt.org/
I don't know that I would recommend the product being advertised inappropriately by keynesis.

How do you set up usb device (remote for ppt) to work with iPad2

How do you set up a USB Device (a remote) to work with an iPad 2? I have the digital camera connector but when I plug the remote in, the device is not recognizable. We are trying to run a slideshow on the iPad using the remote to advance the slides. Thus, the viewer does not have to swipe to advance to the next slide.

...I have the digital camera connector...
Simple answer: no, you can't use that remote with the iPad.
The Camera Connection Kit (CCK) is only for importing pictures. It is not a general purpose USB port so will not work with just any USB device, other than cameras and USB flash drives (but only to import pictures.)

HT201737 how do you close a thumb drive that does not show in finder?

How do you close a thumb drive that does not show in finder?

What do you mean by "Close?"
Eject??
If so, you could use Go to Computer to find it if it is not in the Sidebar or on the Desktop. Ctrl-click or Right-click on the drive and choose Eject <diskname>
Or, you could set it to show in the SideBar in the Finder Preferences, SideBar tab. Then, it would have an eject icon next to it in the Sidebar.

How do you Set the Clo

How do you setup the clock inside the Zen Micro? IT is located in the System or Extra's area, i forgot which, and it tells along with the time, the date. AS i ask before, how do you set it up?

blegs38552 wrote:
I do not see a way in Zen Nucri Photo Media Explorer to synch the payer to my coputer. I have the Zen Micro Photo MP3 player with the latest firmware reelase. I clicked on the double gears, but do not see the option to use system time.
Hmmm, me neither. :smileyindifferent:
It works for my Zen Micro on my old computer, but not for my MicroPhoto on my newer computers.
Anyone have a tip for synching the MicroPhoto's clock to the computer's?

HT1923 how do you get the dvd drive back after installing itunes to windows 7

How do you get the dvd drive back after installing itunes to windows 7??

Safari/Preferences/General and set a new default.

How did you set up your spouses account?

How did you set up your spouses iOS device, iCloud account, etc? And what do you recommend?
My wife and I have one iMac we share (with two login accounts - so basically two computers), an iPad, and two iPhones. Since there are certain things we really like to share between accounts (PhotoStream, Find My iPhone, Documents/iCloud Drive), we've shared the same master iCloud account for the last few years. This has had some drawbacks with things we *don't* want to share, such as we now have to sync our Safari bookmarks, and our keychain/logins for personal websites sometimes overlap, or the "Recent Contacts" shows the last people my wife contacted, not mine, etc.
The pros have outweighed the cons, but it has always left me wanting.
And now that things have changed a bit with iOS 8 and iCloud Drive, Handoff, and Family Plan. I figured now would be a good time to revisit our setup and what would work best for our family. (Of course, this might be a bit premature, with the looming new Photos App from Apple coming, that might make us buy storage in iCloud, but if you have any forethoughts into that, I'd appreciate hearing them!)

You may wish to look at alternatives to sharing the items you've been sharing. For example, you could use shared streams instead of my photo stream, in many ways it might be better, that way you share selected items rather than everything. You really don't need to share Find my phone, you can still use find my phone to find a device associated with any account if you sign in with that account, if you want to see where someone is find friends is a much better choice. You can also share links to iWork documents using iCloud document by document.

How do I set aside 1G free space for a game?

Trying to install civ4- how do I set aside 1G free space for a game?

if your son is set as a child under your Family Share settings you should be able to turn on "Ask permission" for purchases. If you do have that on I don't know why it's not prompting him to ask.
Another way to stop in-app-purchases is to set restriction on his iOS device. (Turn off in-app-purchases under General/Restrictions)

How do I free up hard drive space and turn off file vault?

How do I free up hard drive space on my Macbook so I can

You guess is wrong, Time Machine can back up with FileVault turned on.
You are seriously short on free space. You need to delete or move enough files to increase your free space by at least 10 GB. Your movie, video and music files would make good candidates for gaining the most free spoace quickly.
Once you get the free space you should repair the disk by booting from the Install DVD and starting Disk Utility. I am not talking about repair permissions here either.
The reason to repair your disk is that running the free space so low has greatly increased the chances for disk corruption. If you don't do the corruption will only get worst cause weird problems for you until the system stops.
Allan

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How do you set up multiple accounts in itunes so phones don't automatically sync each others data ?

How do you set up multiple itunes accounts to prevent multiple phones from sharing contact data?

To add to Rod's answer, I have been blogging to explain more in detail the work flows for Question and Score slides, and some tweaking possibilities in these articles:
http://lilybiri.posterous.com/question-question-slides-in-captivate
http://lilybiri.posterous.com/question-question-slides-part-2
Lilybiri

How do you Set up a Family Pack sub-account

how do you Set up a Family Pack sub-account i have purchased a Family Pack account and enter the activation key and i can not find where to set up the sub-account.
please help
Denis

Thanks Shepart
when i activated the account i ticked the upgrade button, should i have ticked the new account button?
anyway, when i do what you say (below) there is not a manage "Accounts button" so i went to reactive it again ( for a new account) and is says that the activation key is all ready in use.
Denis, go to www.mac.com and sign into your account. Click on the word "Account" at the top of the left hand column. You will need to sign in again for security purposes. Once your account settings show up, click on the "Manage Accounts" button and you can take care of everything.
i think i hit a brick wall !!
Cheers
Denis

How do you set Zen sleek drive space through softwa

Similar Messages

Maybe you are looking for