How do you setup software that has autorun.inf?

I have a D-Link 615 try to load the CD but nothing happens. I click the autorun.inf tap and nothing happens, how can I load this software?

Jay Yall wrote:
I click the autorun.inf tap and nothing happens
AutoRun does not exist in Mac OS X. It's a security risk.
how can I load this software?
You don't. This software is for Windows. I assume you are running Mac OS X . Mac OS X is a different operating system from Windows.
Read the device's installation guide to find out if installing any software for this device is required under Mac OS X. If it is, it should also tell you how to obtain it. If you don't have the installation guide, go to the manufacturer's support site and download it from there.
If you do need to install Windows software, you should be able to run Windows on your Mac using BootCamp or a virtual machine such as Parallels.
Switch 101: On Windows, I used to...
<http://support.apple.com/kb/HT2514>
Mac 101: Using Windows on your Mac via Boot Camp
<http://support.apple.com/kb/HT1461>
Mac 101
<http://www.apple.com/support/mac101/>

Similar Messages

How to create a software that has a 90milliseconds of inverval of execution using labview?

i want to ceate a software that will activate pulse generator instrument 90 milleseconds after i have activated power supply. i want to do it using labview software. thank you

In the Time and Dialog functions is a VI called Wait (ms). This VI waits the set number of ms before continuing. You may want to put it inside a single frame sequence to force data flow. (i.e. you have an error output from the previous function that you wire to the single frame sequence with the wait inside and then wire it out again to your next VI. This will force the "correct" execution order.)
If you are using Windoze, then you should be aware that there will be a certain variability in the timing due to Windoze multi-tasking (or at least what they call multi-tasking).
Rob

Windows Server 2012: How do you setup Software OS RAID 1?

Its not clear on how to do this in 2012
Do you just run Disk Management, convert the disks to dynamic, then right click on the disk partion System Reserved and select Add Mirror, and then right click on the second partion, (C:) and add select Add mirror for that one?
This is on a Windows 2012 system NOT windows 2008. I see lots of people pointing people to windows 2008 kb's and docs and unless Microsoft has cleared these for 2012, they really have no bearing...

Hi all,
I spend some time on creating a mirrored Windows 2012 system and here is the result.
@codeaholic: thank you for the question which made me redo the test after 1 year. At the time I post in previous thread, I noticed that some customers cannot boot into the mirrored system so I tried to manually add BCD entries to recreate the boot-up information.
This time I created a virtual machine in Hyper-V and installed Windows 2012. Added a new hard disk and create mirror for both System Reserved drive and Drive C. Here is the picture 1:
After resynching, I reboot the computer and I can see 2 boot-up entries now:
And I tried to boot into "secondary plex" and it could be boot-up just fine.
So the steps should still be the same - we just need to add mirror in Windows 2012 - if any issue occurs which related to BCD, you can still refer to my previous thread to manually edit with BCDedit.
If you have any feedback on our support, please send to [email protected]

How do you retrieve playlist that has disappeared

How do I retrieve my playlist which has disappeared along with my library after changing credit card details???

When you overwrite an existing file the overwritten file is lost forever. You cannot recover it.

How do you recover laptop that has no function keys or CD?

My less then 6 months old Satellite c855-s5350 laptop turns on, the logo comes, and then it goes to a black screen with nothing but the white arrow (curser)....thats all there is...so...im guessing i need to recover this
But there is no cd....and no function buttons on this keyboard (this laptop doesnt come with the F1 - F12 buttons), so how do yo u recover?
By the way, I tried presszing zero while turning it on...doesnt work...please help....

Hi! You start by reading your user guild found here.
http://forums.toshiba.com/t5/Windows-8-Knowledge-Base/What-can-I-do-if-my-Windows-8-laptop-won-t-sta...
Dokie
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

How do you remove contacts that has been copied to the SIM Card on Q10?

I copied them and now I want to delete them how do I do it? Plus it does not should how much space is on it?

Within the Contacts app filter your list to just show Sim entries, the tab on the left.
Hold down your finger on the contact and a side menu will appear on the right at the bottom click on the trash can to delete that entry.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

The new iMac has no cd drive so how do I download software that I have?

The new iMac has no cd drive so how do I download software that I have? I have adobe photoshop elements 11 and baboo drawing pad and they both have CDs to install.

Welcome to the Apple Support Communities
The new iMac hasn't got a SuperDrive to insert CDs and DVDs, so you can't install software from CDs and DVDs.
Instead, you have different ways to install the applications you have on DVDs:
1. Buy any external optical drive for your Mac and use it to install your applications.
2. If you have another PC or Mac, you can save the external optical drive cost and use Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US&locale=en_US Note that this may be a bit slow

How do you delete songs that you purchased through iTunes but don't show up when you connect the iphone to iTunes they don't show up in music when you click on "On this phone"? I have my phone setup to manually manage music. Please help.

How do you delete songs that you purchased through iTunes but don't show up when you connect the iphone to iTunes? They don't show up in the music section when you click on "On this phone". Side Note: I have my phone setup to manually manage music. Please help.

Hi, Mrs.Frankie57.
Thank you for visiting Apple Support Communities.
If you want to delete a song from your iOS device on iOS 7, tap Songs, swipe the song from right to left, then tap Delete. The song is deleted from iPhone, but not from your iTunes library on your Mac or PC, or from iCloud.
iPhone User Guide
Cheers,
Jason H.

HoW DO YOU SETUP A NEW wINDOW 7 64 BIT PC FOR ITUNES AND MOVE EVERYTHING OVER FROM AN OLD PC

How do you setup a new windox 7 64 bit pc for itunes (which documetns folder does the file need placed in and then move everything over from your old pc (which is windows xp)?

I am pretty disappointed in the lack of documentation.
This is the Apple Support page for Boot Camp:
http://www.apple.com/support/bootcamp/
No mention anywhere of Lion, of 4.0/4.01
In the past, 10.6.6+ was suppose to - and sometimes did - provide for a download drivers from within Boot Camp Assistant program, in order to save them to flash or such (that should be about 1GB, too large for CD). Some macs req'd a USB-DVD or other driver that was needed pre-install of Winidows
You don't install Apple drivers until after Windows is installed otherwise,
It is possible for me, with a tower, to run w/o needing any drivers from Apple. But with laptops, mini, you do need some drivers from Apple for graphics, internet, wireless, SMC support.
And right now, loading any Apple support Tech Note articles is very very slow.
People keep asking why Apple can't post 3.0 or 4.0 like they do the updates. Only logic is to force t he download from inside OS X or from an OS X DVD. Otherwise would be here, and avoid all the trouble. they aren't of use on a PC, and any PC motherboard vendor does post their support software for download.
Apple Support Downloads #bootcamp

How do you setup the Discoverer Plus

How do you setup Discoverer Plus what software is used to get to the screen?

Go to Settings>wifi and turn wifi on,. Then tap the network you want to join. Enter ther passward for that network if it is required.
Also see:
iOS: Recommended settings for Wi-Fi routers and access points

How do you setup microsoft 365 email on an ipad 3

how do you setup microsoft 365 email on an ipad 3?

There is no retina scanner on the iPad. There is what Apple calls a Retina display. It means that the display has more pixels than the human eye can distinguish.
http://www.apple.com/ipad/features/

How do you setup GNU/Linux on an iMac G4 with Panther OS X 10.3.9 ?...

How do you setup GNU/Linux on an iMac apple computer
http://en.wikipedia.org/wiki/IMac_G4
with Panther OS X 10.3.9
http://en.wikipedia.org/wiki/OSX10.3 ?...

There is a Ubuntu 10.4 version for Mac with PPC architecture; not sure
how that would work in the computer you may consider running it in.
Some leads on that kind of discussion can be found by using a Google
search, and the words: *ubuntu for PPC G4 Mac* + read through results.
Or choose to search using these terms: *Open Source Linux PPC G4 Mac*
A few results point back to Apple Discussions, where there were inquiries.
Note the version of a Linux-type of OS, compatible with Mac PPC hardware,
on the following page-link: *• Ubuntu 10.0.4 LTS (Lucid Lynx)*
http://cdimage.ubuntu.com/ports/releases/10.04/release/
{You would have to put the image, as downloaded from such a site, on a CD
for use as an Installer; then follow any instructions as available to install it.}
An old page (from 2007?) with some details, some not up-to-date,
may be of help to a limited degree, from here: Ubuntu PPC wiki
https://wiki.ubuntu.com/PowerPCFAQ#Is%20Ubuntu%20supported%20on%20PowerPC?
Or: https://wiki.ubuntu.com/PowerPCFAQ
See their home page to look for other information on the site: https://wiki.ubuntu.com/
These wiki groups are like communities, with rules & other such considerations; you
may be able to also find +Open Source+ sites with information and builds of suitable
Linux versions capable of running well in an older PPC Mac. There are newer ones
that would have no problem on a newer Intel-based Mac, of course.
• Mac Linux Links: (perhaps too dated)
http://lowendmac.com/linux/index.shtml
• Comparison of Linux distributions:
http://en.wikipedia.org/wiki/Comparisonof_Linuxdistributions
Hardware support in the older PPC G4 Mac computer should be considered, in order
to have the better experience possible with the Linux-based OS; and some specs in
an old Mac may not be ideal. The graphics processor unit and amount of dedicated
RAM for the graphics alone, could make a difference; depending on what you had in
mind when running a Linux-based OS in a PPC Mac. So consider hardware specs.
Some hardware in the computer may or may not be supported by the Software; and
then, there may be some problems implementing a Linux OS version in your Mac.
If you had an old Mac Mini (PPC or early Intel) & considered running Linux, there's
a page of general ideas worth a peek: http://sowerbutts.com/linux-mac-mini/
You may not have enough room on the existing internal hard disk drive inside the
iMac G4, for a complete OS X 10.3.9 or Later OS X, and a partition for Linux in it.
And, you may find through reading further, if you need to (or don't) start fresh and
have a partition for each different OS, or not. For organizational purposes and ease
of removing one system or the other, a partitioned hard disk drive may be best.
There probably is a way to have Linux on an external bootable hard disk drive; &
that would have to be compatible with the Mac hardware requirements to be seen
and used by the computer, and also the ability to restart from Linux into Mac OS X
would have to exist in the system software. Hopefully without incident.
You will have some degree of a learning curve in this matter, from reading up on
the details of any viable Linux versions, through the ones likely to work in your
old PPC G4 Mac, and then if there are more than two or three good ones, of those
what one would be most likely to be worth the additional effort to attempt to use in it.
Depending on the version and specifications of your iMac G4 computer, there could
be different versions of linux systems capable of running it. However, some items
may not be supported which you would need to have working, such as wi-fi internet
and sleep mode, etc; among others. Searching the net does bring up more info.
{You may find, that going to OS X 10.4.11 would be more worth the effort, in that
most everything would 'just work' and you can still find many good software bits
and some fine freeware or low cost shareware to run on it. Linux versions vary
so much on what they can and cannot do, I would not recommend running it.}
Since I am not an expert in the matter, hopefully someone with a experimental time
and results in a similar vintage Mac as yours will reply and give you insightful info.
Good luck & happy computing!

How do you setup LibreOffice?

I downloaded LibreOffice from the net. The script that came with it copied it to Applications. How do you setup LibreOffice so it is invoked when you open a document, spreadsheet, presentation, drawing or database?

For the documents (.e.g, Word, Excel, Powerpoint, AppleWorks, others) that you want to be opened by LibreOffice when you double-click them, select each icon type, and either press cmd+I (eye) for Get Info, or control+click on the icon to show the contextual menu, and then select Get Info.
In the Get Info panel (that may popup underneath Safari), there is an Open with section, and a default application is shown. Change this to LibreOffice, and then click the Change All… button. You will get a Are you Sure dialog, and then press Continue. If you did this for a .docx icon, then a future Word .docx files will be opened by LibreOffice. You would have to repeat this process for any .doc icon as well.
You can also drag and drop files on the LibreOffice icon in your Dock, if you dragged and dropped it from its /Applications location onto the Dock. When you first launch LibreOffice, you will get a dialog that has an open on it. Just press open, and you will not be challenged with this dialog again. If you were to click the Open Files part of the LibreOffice opening panel, then click again on the File types in the document chooser, you would see the extensive list of documents it can open.
If you have a single Page PDF, you can drop it on the LibreOffice icon, and you now have an editable PDF document. Don't overlook the PDF manuals located on the LibreOffice site They were written in LibreOffice Writer.

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is "unable to find the original file?" I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

How do I find music that has been uploaded to iTunes from a purchased CD and iTunes is “unable to find the original file?” I no longer have the CD. I have tried all the usual methods of looking in my iTunes library and through Find. No Luck.

Backup drive?
Subscribe to iTunes Match?
If neither of the above and you don't have the CD and can't find your tracks on the computer then they you're stuck. A file recovery utility will cost $100, plus another $100 for an external drive to which to resue the files, and may not even work. You can buy a lot of CDs for $200.

How to get PDF file that has been transformed into docx into my filing system so I can work on it???

How can I get the PDF file that was transformed into a docx file into my filing system to be able to work on it and translate it as the customer requested?

THanks for your reply.
Well what happens is I bought the program. It gives you a button to click,
you log in and then a box opens up asking you to select the file, I go into
my filing system (in Windows explorer) select the file, and the program
converts it into docx, my choice. I can read it there and when I try to
copy and paste it into my file where the PDF version is saved, it behaves
like an "image", and I can't save it.... or it saves likes something you
save on the internet, so you have to go into internet every time you want
to see it. I have also pressed any amount of buttons to see if it will
give me the option to save it any other way, and have found nothing. What
I would need is a file in docx.format that I can edit. People send me
things in PDF and sometimes I can just copy it off the PDF file and save it
in WOrd, then I can translate it for them. But sometimes the PDF file
doesnt allow me to copy the text. If it is in image form, I cannot work on
it. It means printing it, so I can copy type it into Word... and for that
I certainly wouldnt need to buy a program. Its just double the work and
ends up that the job takes twice as long.!
Sorry if I am a bit dumb with informatics. But I simply could not find
any way whatever to copy the PDF file that was transformed into Word, in a
format that would enable me to edit it.
Kindest regards,
Margery
2013/12/2 Test Screen Name <[email protected]>
Re: How to get PDF file that has been transformed into docx into my
filing system so I can work on it???
created by Test Screen Name<http://forums.adobe.com/people/TestScreenName>in *Adobe
ExportPDF* - View the full discussion<http://forums.adobe.com/message/5890871#5890871

How do you setup software that has autorun.inf?

Similar Messages

Maybe you are looking for