How do you split a voiceover audio clip?

I have not found a way to take sections of a voiceover and split them up. It only allows me to trim from the beginning or from the end. I thought if I could copy the complete voiceover again, I could trim each version differently but I have not found a command to copy another version of the voiceover. Any ideas?

This may help: http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html
Also, searching this may help, too: http://mroogle.edesignuk.com/

Similar Messages

Split audio only from Voiceover audio clip

Does anyone know how to split a voiceover audio clip? I need to split the clip because it is one minute long and there is a 5 second section in the middle of the clip I want to delete, but I want to keep the beginning and the ending. The clip trimmer help info. doe not help because it only informs about splitting video clips and not audio clips which are separated from the video clip.
It is not the same as simply moving a second audio clip copy from another file and using the clip trimmer to make it work, since it was recorded directly into this project. Or is there a way to simply duplicate this voiceover audio clip? I have not found a way.

resolved as Hardware problem with jack.
solution: Take skewers and move inside in jack.

Is it possible to split an added audio clip (like you can with the video clips)?

I'm working in iMovie 9. I've recorded a audio voiceover that I added to my video clips.
I want to be able to split the voiceover audio so I can separate the different sentences and move them to where they are appropriate relative to the video.
With video, this is easily done with shift+command+S.
I tried selecting the audio track and doing shift+command+S but it doesn't work.
I can't figure out how to do this. Is it possible?

Thanks for the tip. Tried it, no go. Guess 9 is primitive that way.
I now remember a few years ago having the same problem, and I contacted Apple and suggested they make this possible in future versions of iMovie. Guess they listened to me!

How do you split a clip to do an insert edit in iMovie 08?

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
thanks!!
- Dan

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
1) Move a clip (or any portion thereof) from your Event clip to your project and place it where you need it.
2) With the newly added clip still selected in your project, grasp and move the right and left handles to set the exact frames you wish to use as your "in" and "out" points.
3) Select the "Spit" option to segment the selected area into what you want to keep and what you don't need.
4) Select the segment(s) you don't want and press the "Delete" key to remove it/them from the project window.
5) Repeat as needed to create your sequence of segments and then add titles and transitions as needed.
Note: Since your editing in iMovie '08 is non-linear, non-destructive, and "by-reference," you can source the same content multiple times to a single project or even to multiple projects and overlap your "splits" since they are "logical" rather than physical.

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

Here is a Tutorial on How to sync Multiple Video and Audio Clips

Check out my Tutorial on How to sync Multiple Video and Audio Clips http://vimeo.com/28972315

Very true ! My main point was to show how easy it was to sync. I still think apple has a way to go to make this a great tool. It was fast to edit but when I want to send somthing to AE 5.5 it was a nightmare. I do I love how it organizes keywords and the color correction tools are good if you want to do it your self (check out this site http://www.colorgradingcentral.com/final-cut-pro-x-color-grading-table-of-conten ts ) it will be a great program if apple listens to all the comments but does not make it too complicated the you cant create quickly.

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

I have multiple users on one account and now want to split the account. How do you split and account?

My family and I have used the same account for many years. We are now looking to create individual accounts and separating the music and other items appropriately. How do you split an account?

It's not currently possible to split an account, all content will remain tied to the account that originally bought/downloaded it. You can try leaving feedback for Apple, and maybe at some point it will be possible : http://www.apple.com/feedback/

How would you split a 10 GB root partition? Would you?

The system seems to be booting a little slow lately (been using Arch for more than a year now) and I was thinking of splitting the root partition to improve performance.
Right now the entire OS is on a single partition. I don't have a /home partition but I can see it's usefulness:
- files on /home are, in general, more frequently written (browser cache especially), which means less fragmentation for the root partition
- having a noexec flag for /home so no potentially dangerous software will run from there (and why would you need to run software from /home?)
- my /var folder takes up 102 MB, 9.706 files in 4.846 folders. Is there a filesystem that will deal well with many small files ? ReiserFS maybe ?
So how would you split (gigabyte-wise) a 10 GB partition into /, /home and /var ? And would you ? I've been told from the IRC channel that it makes zero sense. At least not for desktop use.
PS: I'm also switching from i686 to x86_64, so please take that into account as well. For instance I noticed that 64 bit software usually takes up more space than 32 bit.
Last edited by DSpider (2011-05-29 11:32:04)

Here is what's happening on my Arch box:
. 2,1TiB [##########] /mnt
. 61,0GiB [ ] /home
5,2GiB [ ] /usr
. 2,9GiB [ ] /var
126,0MiB [ ] /opt
83,1MiB [ ] /lib
. 14,1MiB [ ] /boot
10,0MiB [ ] /sbin
. 7,3MiB [ ] /etc
5,3MiB [ ] /bin
. 3,0MiB [ ] /tmp
192,0kiB [ ] /run
20,0kiB [ ] /srv
! 16,0kiB [ ] /lost+found
4,0kiB [ ] /dev
4,0kiB [ ] /lib64
! 4,0kiB [ ] /root
. 0,0 B [ ] /proc
0,0 B [ ] /sys
< 0,0 B [ ] /media
Generated with ncdu.
I have big stuff installed like a full texlive and libreoffice and I never clean my package cache. This is /var:
. 2,6GiB [##########] /cache
. 153,2MiB [ ] /lib
57,1MiB [ ] /abs
. 31,3MiB [ ] /log
7,4MiB [ ] /tmp
. 592,0kiB [ ] /spool
. 132,0kiB [ ] /run
8,0kiB [ ] /lock
e 4,0kiB [ ] /opt
e 4,0kiB [ ] /local
e 4,0kiB [ ] /games
! 4,0kiB [ ] /enigma
4,0kiB [ ] /empty
@ 0,0 B [ ] mail
And this is /var/cache
2,6GiB [##########] /pacman
10,9MiB [ ] /pkgtools
3,0MiB [ ] /man
320,0kiB [ ] /cups
280,0kiB [ ] /fontconfig
252,0kiB [ ] /samba
! 4,0kiB [ ] /ldconfig
e 4,0kiB [ ] /hald
/usr
2,8GiB [##########] /share
1,7GiB [###### ] /lib
415,2MiB [# ] /bin
153,9MiB [ ] /include
149,8MiB [ ] /lib32
15,3MiB [ ] /src
13,7MiB [ ] /sbin
104,0kiB [ ] /local
I think I have a very typical desktop here: Mostly web/office stuff and some multimedia.

U410 Windows 8 how do you split the screen in two?

I have an IdeaPad U410 with Windows 8 as an Operating system. I would like to know how do you split the screen in two. Also I would like to know if I can put my screen as a touch?
Moderator Note; subject edited for relevancy

hi BoJ,
Welcome to the Lenovo Forums.
If you're referring to having an extended display , you will need to have an external monitor and enable extended mode by pressing the Winkey+P and select Extend.
If you want to split the screen to work with 2 documents or 2 windows at a time, you can snap the windows by pressing Winkey+ Left or Right arrow - check this article in reference.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do you get 24/96 audio from macbook air?

How do you get 24/96 audio out from macbook air?

If your media source is limited to a DVD disk, then a DVD reader will somehow have to be employed to read that disk. Apple sells a Superdrive specifically designed for use with the MBA, but I've found that many others will work almost equally as well.
Some DVD disks already contain a digital file suitable for play, when directly copied off the disk. However, for more traditional DVD movies, it will require an application to perform what is called "ripping", to convert and copy the DVD's contents to a file that can be moved and played off the disk. I have used an application called "Handbrake" with reasonable success.
After ripping, you may need another application to convert it to a format specific to the media player you may choose to eventually use. e.g. to convert into a file that iTunes may import.

How do you split clips in the event viewer in iMovie '11?

I'm using iMovie '11 and have imported a very long movie (over an hour from VCR Tape) that I want to split into multiple events, however the "Split Clip" option is grayed out. How can I split a large event into smaller events?

I have discovered a round-about way to split large events from comments in this forum, so apologies, and or thanks to other posters.
You can split events by deleting (and discarding) a single frame at the point where you want to split the two clips. It's processor intensive (takes a while to do), but it works.
1.) In the Event Viewer, click to select where you want to split the event.
2.) Drag the yellow handles to make the selection as small as possible (1 frame?). If you drag the thumbnail display slider to the left to show only 1/2 second intervals, it helps when selecting a single frame.
3.) Right click and select "Reject Selection". The clip is now split.
4.) When you've completed all of your clip splitting, select "Show: Rejected Only" at the bottom of the Event Viewer to show all of the rejected frames.
5.) Click on "Move Rejected to Trash". This operation could take a while.
That should be it.
Hope this helps.

How to cut unwanted section of audio clip in iMovie 09.

I had some problem removing section of audio clip that are too long for the movie. I finally found out how to do it. Here's how. Hope this will help others.
1.Using the playhead, find the area in which you want to cut the audio and place the playhead there.
2.Click on Edit - Split Selected Audio Clip at Playhead. This will automatically split the audio clip into two separate clips. Continue to do this until you create a segment that you wish to use.
3.Delete the extraneous segments by clicking on them and pressing delete.

Do you really have iMovie 08? I could give you the answer for iMovie 11 and FCP X, but if you are on iMovie 08, I assume you are backlevel on FCP as well?

How do I send a single audio clip to STP without sending master clip too?

Hi there,
I'm trying to clean up production sound in STP using a roundtrip from FCP. When I send a single audio clip to STP as an Audio File Project, the entire master clip is sent (which is as long as the tape.) I thought I'd only be sending the part I had edited into the FCP sequence. Also, in STP there are now left and right audio files (from the original master clip). I only wanted to adjust the sound on one track, not both.
How do I send just a single clip from a single track from the FCP timeline to STP? Should I be sending as an Audio File or Multitrack Project?
Does it matter if the clip was edited into the sequence from a subclip (rather than from a master clip)?
Thanks so much. Any help is appreciated!

If you are planning to edit your sound in Soundtrack Pro, you do a log & capture in FCP not Capture Now. Like FCP Soundtrack Pro brings in the whole file from Media Start to Media End. To nondestructively edit it needs the while file residing on your scratch disk. That's why you log & capture each take unless you're doing something quick & dirty.
If you are working on a documentary & you have 50 plus hrs. of footage it may be too time consuming to log all the individual clips. As an alternative you could do Capture Now & then subclip, export your subclips after renaming them, as a batch list. Dump the original capture file, import the batch list & do a batch capture of the offline clips. Now you have the media in a sensible form that Soundtrack can work with. It's still going to bring the media in from Media Start to Media End but now each of the media starts to ends are a fraction of their original size.
Dave

How can I make all 40 audio clips the same volume?

Hello, all!
I'm finishing up a General Orientation video for new employees in Yellowstone National Park and am-this-close to being finished!
I'm creating the video in Premier Elements 9 with some video footage and some still photos blended together. (Yes, I tried to "Ken Burns" it... he would laugh out loud if he saw my version!)
I've narrated most of it in individual WAV. clips that I've inserted into the audio timeline under each video segment.
I have about 40 audio clips, and even though I used a decent microphone, I still find that each clip has a slightly different volume that is really noticeable when the video DVD plays on TV. I'm realizing that I should have made an effort to keep a standard distance from the mic when recording.   Hindsight is 20-20.
I have been trying to change the volume on each clip to make them all the same volume, and it's making me a little crazy.
Is there any way for me to capture all the audio at one time and make an adjustment that would make all of them the same volume?    I tried CTL-A and then did "normalize" on it, but it seemed to make very little/or no difference when viewing.
Any advice would be really appreciated!
Signed, the lone creative video girl in Yellowstone.

You are most welcome, and it has been a great day. Thanks!
Good luck, and pay close attention to the differences between Clip Keyframes and Track Keyframes. They accomplish the same result, but have differences.
Good luck,
Hunt

How do you split a voiceover audio clip?

Similar Messages

Maybe you are looking for