How do you split clips in the event viewer in iMovie '11?

I'm using iMovie '11 and have imported a very long movie (over an hour from VCR Tape) that I want to split into multiple events, however the "Split Clip" option is grayed out. How can I split a large event into smaller events?

I have discovered a round-about way to split large events from comments in this forum, so apologies, and or thanks to other posters.
You can split events by deleting (and discarding) a single frame at the point where you want to split the two clips. It's processor intensive (takes a while to do), but it works.
1.) In the Event Viewer, click to select where you want to split the event.
2.) Drag the yellow handles to make the selection as small as possible (1 frame?). If you drag the thumbnail display slider to the left to show only 1/2 second intervals, it helps when selecting a single frame.
3.) Right click and select "Reject Selection". The clip is now split.
4.) When you've completed all of your clip splitting, select "Show: Rejected Only" at the bottom of the Event Viewer to show all of the rejected frames.
5.) Click on "Move Rejected to Trash". This operation could take a while.
That should be it.
Hope this helps.

Similar Messages

Is there a way to split clips in the Event browser? (audio-synch related)

It seems there is no way to split an event-clip (a clip that appears in the Event browser). You can split Events--but only if they consist of more than one clip. And then you can only split them between two clips. People who have transferred analog video tapes (e.g., Video8) to their computers with the help of iMovie end up with Events that are the same length as their video tapes. So this usually means 2-hour events (consisting of one clip). But iMovie has a synchronization problem for such DV files. This problem would be mitigated by having shorter events. Hence the desire to split events. I thought a read somewhere a workaround for splitting event-clips, but if was a few months ago. I wouldn't think there is any reason we cannot split event clips, other than a preference for non-destructive editing. But a bit of destruction may be worthwhile if it improves synchronization. Does anyone know a way to split clips in the Event browser?

you haven't updated to FCPX10.1 haven't you
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver15f852e7

How do you start music on the 8th frame in iMovie on iPad

how do you start music on the 8th frame on a ipad with imovie

Add a song to the start, trim it to 10 frames or what you want,
THen turn the volume to zero.
THen next track then starts where the silent track ended.
Terrible workaround, but it works.

How do you show time on the month view of Calendar

My calendar events, before Maverick, showed the time on the month calendar view. Now I can only access time if I click on each individual event or the day. Is there any way to change the calendar view to include the time?

Thanks for replying. You helped me figure out the answer. My calendar needed to be stretched larger for the dates to appear

How do you go back to the list view on the new iTunes?

I just want my music in a list with the artist and genre like it was before, is there a way to do that?

How did you solve this!?!?!

I want to remove clips from the event browser. How?

How can I remove clips from the event browser in iMovie 11 when I have finished using them - without deleting or rejecting them?

I'm not clear why do you want to remove them if its not to save space by deleting them?
Geoff

Changing the Event View Field Display Order on a Calendar

We'd like to change the display of a calendar event to show the Title on top and the time below. This is how it currently looks below. Is there a way to change it?
Orange County District Attorney

Hi,
According to your post, my understanding is that you wanted to change the Event View Field display order on a Calendar.
You need to insert the code below into a Content Editor Web Part.
<script type="text/javascript" src="http://code.jquery.com/jquery-1.10.2.min.js"></script>
<script type="text/javascript">
function changeCalendarOrder() {
$(".ms-acal-sdiv").each(function () {
var arr = $(this).find('div').toArray();
var temp;
temp = arr[0];
arr[0] = arr[2];
arr[2] = temp;
$(this).html(arr);
//alert($(this).html());
_spBodyOnLoadFunctionNames.push('calendarEventLinkIntercept');
// hook into the existing SharePoint calendar load function
function calendarEventLinkIntercept() {
var OldCalendarNotify4a = SP.UI.ApplicationPages.CalendarNotify.$4b;
SP.UI.ApplicationPages.CalendarNotify.$4b = function () {
OldCalendarNotify4a();
changeCalendarOrder();
</script>
The result is as below:
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

How do you split a clip to do an insert edit in iMovie 08?

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
thanks!!
- Dan

How do you split a clip to do an insert edit in iMovie 08? I have a single, long event that I'd like to do insert editing on. I'd also like to insert transitions. Can anyone tell me how to do this?
1) Move a clip (or any portion thereof) from your Event clip to your project and place it where you need it.
2) With the newly added clip still selected in your project, grasp and move the right and left handles to set the exact frames you wish to use as your "in" and "out" points.
3) Select the "Spit" option to segment the selected area into what you want to keep and what you don't need.
4) Select the segment(s) you don't want and press the "Delete" key to remove it/them from the project window.
5) Repeat as needed to create your sequence of segments and then add titles and transitions as needed.
Note: Since your editing in iMovie '08 is non-linear, non-destructive, and "by-reference," you can source the same content multiple times to a single project or even to multiple projects and overlap your "splits" since they are "logical" rather than physical.

How can I select multiple clips in the event browser?

I can't seem to figure out how to do something that should be pretty simple. I want to select multiple clips in the event browser that aren't next to each other. Right now it's only letting me select the two clips with every other clip in between. Is there a keyboard function that will allow me to deselect the clips in between while leaving the two on the outside selected? In Apple's finder you can do this with files by holding down shift-command while clicking on the ones you want. Or is there away to rearrange clips in the event browswer?
I'd like to be able to create a multicam clip, but there is always going to be other media in between the clips I want to combine, so how can I select only the clips I want?
Thanks!

Holding the Command key should let you select non-contiguous items, just as in the Finder.

I DRAG AND DROP A VIDEO CLIP FROM THE EVENT BROWSER THAT IS 7.9 SECONDS INTO MY IMOVIE I'VE STARTED AND IT CHANGES IN THE PROJECT TO 4.9 SECONDS - HOW CAN I KEEP THE LENGTH THE SAME

I drag a video clip from Event to Project into my imovie I've started. The video clip length changes from 7.9 seconds to 4.9 seconds. How can I stop that length from being changed?

If you are using transitions either side of the clip they will use some of the clip to generate the effect, there isn't anything you can do unless you remove or shorten the transition.
If you aren't using transitions it may be that you are only selecting part of the clip in the event window, try dragging out the yellow frame to include all the video you want in the project.

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

I have multiple users on one account and now want to split the account. How do you split and account?

My family and I have used the same account for many years. We are now looking to create individual accounts and separating the music and other items appropriately. How do you split an account?

It's not currently possible to split an account, all content will remain tied to the account that originally bought/downloaded it. You can try leaving feedback for Apple, and maybe at some point it will be possible : http://www.apple.com/feedback/

After transferring clips to Final Cut, they do not show up in the events library. They show up in the timeline of my project, though. how can I see then in the events browser?

After importing clips to Final Cut, they do not show up in the events library. Events from 2014 show up, but not 2015.They show up in the timeline of my project, though. How can I see them in the events browser?

TThose aren't bins. Those are just groupings based on when the content was created or any other selected parameter. Use the action popup in the toolbar tho change the setting.

U410 Windows 8 how do you split the screen in two?

I have an IdeaPad U410 with Windows 8 as an Operating system. I would like to know how do you split the screen in two. Also I would like to know if I can put my screen as a touch?
Moderator Note; subject edited for relevancy

hi BoJ,
Welcome to the Lenovo Forums.
If you're referring to having an extended display , you will need to have an external monitor and enable extended mode by pressing the Winkey+P and select Extend.
If you want to split the screen to work with 2 documents or 2 windows at a time, you can snap the windows by pressing Winkey+ Left or Right arrow - check this article in reference.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

How do you change the Event Viewer archive location in Server 2008 R2?

We're wanting to redirect the security and system event viewer logs to the D:\ on a Server 2008 R2 box
We've got the current logs to save there, however all archived system/security logs are still being saved on the c:\ in their default location in %windir%\system32... and killing the OS partition.
I can write something up in PoSh and schedule it, but I'd rather use any built-in capabilities first...
I've taken a peek in the HKLM\Services\CurrentControlSet... hive where the event viewer behavior is configured and do not see an option to set a path for the archive location...

Unfortunately, you cannot customize the location of archived event logs in Windows. The logs will always be archived to %windir%\system32\Winevt\Logs\Archive-xxxxxx
There'd be some scripts can help you automatically archived logs to another location. You can find them here: http://gallery.technet.microsoft.com/scriptcenter/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=security
Regards,
Zhang
TechNet Subscriber Support
If you are
TechNet Subscriptionuser
and have any feedback, please send your feedback here.

How do you split clips in the event viewer in iMovie '11?

Similar Messages

Maybe you are looking for