How do you Spread an Image across multiple pages and print?

I'm trying to create a large poster to be put on a bulletin board. I've mangaed to spread the image across multiple pages but I can't figure how to be able to print the pages have the edges line up successfully after cropping. I've been playing with the bleed settings but can't figure it out. Here a shot of what im working with:
Im working in CS3 on Mac OS X

Create your InDesign document at your final size and when you print it out put a check mark in the box for Tile

Similar Messages

  • How do I spread one image across 2 pages?

    How do I spread one image across 2 pages?

    You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

  • How do you stretch an image over multiple pages?

    I need to print a large picture, one that will be 30x30 inches. I need to print multiple pages with the image cut up but when I try to resize the image to make it bigger, Pages doesn't create a new page, it just runs the image off the page. Any help would be appreciated. Thanks!

    Pages will accept custom page sizes of 30x30 (or even larger), but then you're faced with the problem of finding a printer that will handle that size of paper.
    OTOH, if you move you're project to Numbers, you can:
    Open a "Blank" template.
    Use the Metrics Inspector to set the Sheet size to 30" by 30"
    Click on the Table in the sidebar to select it.
    Press Delete.
    You'll be left with a 30x30 (or larger) blank slate on which you can place Text boxes, Shapes and graphics objects (including your large picture).
    Thanks to Yvan, who has been mentioning the use of a Numbers sheet as a canvas foe some time now.
    Regards,
    Barry

  • Spread image across two pages and print the full pages

    Hi there,
    Im having a bit of trouble with InDesign CS3.
    I want to place an image across two facing pages but can't seem to make it go further than one page.
    Also I want to figure out how to print full pages, currently I am only able to print what is contained in the pruple bounding box on the page, any part of the image outwith this is cropped off leaving a white border on the page - this isn't an issue for all but my title page and this two page image I require.
    Any tips.
    Cheers
    malc

    I don't understand the inability to place an image that spans two pages (not that I necessarily think this is a good thing to do under most circumstances, but that's a different discussion). Can you see both pages in the same spread? How about providing some details about what you are doing, and maybe a screen shot showing what's happening. Perhaps you're using a frame on the master page?
    The second part sounds like a printer issue, but that's hard to know without knowing what your "purple" guides (presumably the page margins) are set to. Most printers are not able to print to the edge of the sheet of paper, regardless of what might be included on the page, so you get a white border that will vary in size depending on the printer model. Generally speaking, to print a bleed you must extend the items beyond the page edge (to insure there is no white edge left fom misaligment in the cutter) and print on a larger sheet, then trim to finished size.

  • How do you share Aperture file across multiple users on same Mac?

    How do you share Aperture file across multiple users on same Mac? Seems this should be a preferences choice.

    When you share your library between users, you may run into permission and ownership problems, if both users are editing the Aperture library and not only reading it. To avoid that, it helps to put the Aperture library onto a separate disk or a separate partion of your hard drive. For s separate partition or disk you can enable the "ignore ownership on this volume" flag. Then all users can access the library as owners of this library.
    You might try to put the aperture library into a shared folder on your mac, but that has caused problems recently, i.e. when the library also contains video files.
    Regards
    Léonie

  • Need to select and move images across multiple pages...

    Hi,
    I am using Indesign CS2 on a Windows machine and have a 25 page document with 4-up photos (4"X6") on individual pages. I used the ImageCatalog javascript to load these images so I don't seem to have any control from the Master page. I would like to group and move these images to a different location on their own pages.
    Do you know how to select these images across multiple pages? Or can a simple script be written to process this task?
    Thanks in advance for your help.
    -Greg

    Hi Greg,
    A script can certainly do what you want to do--but you have to be a bit more specific. Do you want to move them to different pages in some predefined way, or do you just want to adjust them a bit on the pages they're already on?
    Thanks,
    Ole

  • How do I split 1 image across 2 pages? Am using Pages `08.

    When formatting a magazine - how do I split one image across 2 pages side by side?

    You can't with a single image, but you can "fake" it. Duplicate the image & then line up the two halves. It's easier if you are viewing facing pages two-up.

  • PRINT ENLAGED IMAGE ACROSS MULTIPLE PAGES

    I have a scanned image that I want to print at 4 times its original size across multiple pages. Is there any known way to do this?  

    Thanks for the info, guys.
    I don't have InDesign installed. I'll consider installing it, but it's sad that we have to install an entire app to get functionality for Adobe graphics programs that even browsers offer routinely. Jeez, Firefox spans pages automatically.
    If you have a graphic larger than the page and you don't opt to resize it, Photoshop should offer to clip the overflow or print multiple pages. And ideally, to print multiple pages with an optional overlap.
    I would have thought this was in version 1. But then again, Photoshop didn't have a thumbnail browser until what, version 7?

  • I know it is possible as E O Wilson's - Life  On Earth displays it, but how do you place images across multiple pages in iBook Author?

    I have a large image that I would like to span across 2 or possibly more pages in iBook Author. I know that it is possible as you can see it in the above mentioned E O Wilson's Life On Earth. However at the moment when I place an image in the position required it simply displays it on one of the pages. Any help with this issue would be greatfully recieved.

    You'd need to split the image into two, then place the left 1/2 on one page and the right 1/2 on the next, side-by-side.
    Disable Portrait orientation for the book via the Inspector.

  • How can you develop photo galleries with multiple pages using the web module?

    Going through the web module I can see there are many options for developing a web page with a single collection of photos.  How can you develop a web site with multiple pages containing different categories of photos using the Lightroom web module?

    This thread will give you several ideas.
    Re: How do you embed a gallery into an existing website?

  • How to use Different Main Windows in Multiple pages to print internal table

    Hi experts,
    I have a problem regarding how to have multiple different main windows in  smartforms..the problem is that i want to print an internal table in the third page of the smartform and that table can have dynamic values ..sometime it may have more than 400 values also which can not be printed in one or two pages ...
    so to accomplish the same what i did was..
    i tried creating a new main window in the third page but it is throwing an error saying two main windows not allowed and i also tried by copying the first page's main window but it is just repeating the same content what was there in second page..
      i also tried by creating a secondary window in the third page and in that  window i tried giving my internal table and tried by giving the next page to itself but  that also is not allowed and it throws an error saying a page without a main window cannot point to itself as a next page....
    i also tried using a secondary window and in that window i was trying to display the internal table but it is only showing third page content and fourth page itself  was not created....although in my next page field value of the third page , i have given  the third page itself as a next page ....but this also is not working ,.....
    please suggest how to have different main windows(not copy of first main window) in smartforms in order to display the dynamic contents of an internal table

    HI ,
    Just check with your smart styles with assigned  paragraph  allignment   .
    Try to create character style  with your required  font ,size and  Allignment  .
    Hope u this will solve your issue  .
    Let me know if any concerns......
    Regards,
    Lokesh

  • Excel with hyperlinks, multiple pages, and print titles

    I have two large excel files that have hyperlinks to the web. In standard page size, each will have multiple pages. Because it is continuous information, Print Titles are required at both the top rows and left columns. However, along with having to shut off Set Print Area, it seems I must also shut off Print Titles in order for Acrobat to maintain the links. The first problem isn't really a problem. Shutting off print titles, however, makes the document useless to readers. Does anyone have a workaround? The only thing that occurred to me is to manually split the pages (they could be linked to a master sheet so I still have a continuous master) and repeat the print title rows, but that seems like a lot of extra work since Excel isn't fond of linking large sections all at once.

    I resolved this myself after much experimentation.
    (1) Clear Print Area
    (2) Remove values from Print Titles.
    (3) Manually insert rows and columns that need to be repeated on each page. You can do this as links if you want to.
    (4) If your spreadsheet needs lines all around the borders, make sure you one have one empty row and column on all four sides. Without this, you may lose some of the bordering lines.
    (5) Hide ALL other unused rows and columns that you do not want to show. This effectively functions as a Set Print Area.
    (6) Make the PDF.
    (7) If necessary for further manipulation of the worksheet, hide the extra inserted rows and columns (Step 3) as you work with the worksheet and unhide them before publishing.

  • How can I spread an image through multiple shapes?

    I have a large image im wanting to use to do a sort of peek-a-boo through multiple small triangle shapes i've created. Is there a way to do this?

    Select all your shapes, and choose: objects > paths > make compound path. Then you can place your photo into the compound path and it will span all the shapes.

  • How do you display a theme across multiple displays?

    I have three monitors set up. The problem is the theme will only work for one display. Is there a way to fix this. Google chrome themes span complete width of screen. Thanks.

    I found this after I posted. Works like a charm
    If the sheets are in the same document, you may do what you want .
    At least if you accept that changes are always made in the same table of a given sheet.
    Assuming that the "main" table is Table 1 in Sheet 1
    In the table Table 2 of Sheet 2 insert the formula :
    =Sheet 1 :: Table 1 :: D12
    and every value inserted in cell D12 of table "Table 1" of sheet "Sheet 1" will be reflected in the other table.
    Yvan KOENIG (VALLAURIS, France) mardi 31 mai 2011 20:37:03
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
    Please : Search for questions similar to your own before submitting them to the community
    To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

  • How can tables across multiple pages be printed?

    I've got DIAdem 9.0. I have a table on a report that has so much data it spans several pages. I can scroll through the tables with in DIAdem REPORT but I can only print one page at a time. Does anyone know how to print all the pages from script? Is there a way to print the page number like "Page 3 of 10". Thanks!

    Hi DIAdemon,
    Before issuing the PicPrint() command, you can set a couple of DIAdem variables in order to control what prints:
    To print all sheets:
    PrintRangeType = "AllPages"
    Call PicPrint("WinPrint")
    To print some sheets (for instance only sheets 2 to 4):
    PrintRangeType = "PageEnums"
    PrintFromPage = 2
    PrintToPage = 4
    Call PicPrint("WinPrint")
    Also, you can insert text on each DIAdem-REPORT sheet that uses DIAdem variables to dynamically display page number information on each sheet:
    Page @GraphSheetCurrNo@ of @GraphSheetCount@
    This will display the "Page 3 of 10" syntax that you wanted. Note that if you insert a new DIAdem-REPORT sheet, you will have to click View >> Refresh to get the page number information updated
    on all sheets.
    David Mc.
    NI Applications Engineer

Maybe you are looking for