How do you start the Brochure "getting started" piece?

I'm sure it's obvious to the folks that use this software how to use this download, but can't see anything that indicates how.
Yes, I downloaded the files and they went into my download folder on my MacPro, I then decided to move them to another more convenient to find folder.  This is what the unzipped  contents of the folder look like:
The contents of the "read me" file look like this:
Opening the folder in Finder does nothing more than display the contents as shown as above.
There are no other clues, that I can find, on how to start the Getting started tutorial.
Ken

Hello Ken,
To get started, just start watching the first video in the series on the same page you grabbed the file download from.  As you progress through the content, the presenter will let you know when you need to bring in the various sample files you downloaded.
Please let me know if I did not understand your question correctly.
Thank you,
Ed Sullivan

Similar Messages

  • How do you use the "Item Containing Start/End Date" in a Calendar?

    Hi
    I want to do a calendar where the days shown will be conditional to a certain interval. Now I though I could achieve that using the Item Containing Start Date of a calendar. But it doesn't seem to work. In the help it says :
    Enter an item in the application which holds the start date of the calendar. The format of the date in this item must be YYYYMMDD.
    This is what I did here
    http://apex.oracle.com/pls/otn/f?p=34530:1::::::
    I have 3 fields. 2 for the Start Date and End Date and 1 for the "Date Item" parameter. Only the latter has an effect on the calendar display, the calendar only displays the month of the "Date Item" (in monthly mode).
    Wether or not I check "Begin at Start of Interval", it doesn't affect the way those fields are affecting the Calendar.
    So, how do we use that "Item Containing Start/End Date" parameter?

    Hello,
    does yout Script work when you begin with ?:
    Start-Process powershell -Verb runAs
    Best regards,
    Stefan
    German Orchestrator Portal ,
    My blog in English

  • I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    I never used LabView but need to generate a RS-233 serial output string that contains an IRIG timestamp based on a contact closure. Is LabView an appropriate tool to do this? How much does it cost to get started with the product?

    Labview isn't cheap, but it would certainly allow you to build a program (set of vi's - virtual instruments) that would do what you describe. Where would the timecode information come from? Your vi, or program, would: Start up, initialize the serial port, loop until a trigger happened, read the timecode (from where?), output that timecode out the serial port in a loop until you pressed the stop button. There is a free evaluation of Labview software available from NI - the base product itself runs about $995.
    - Dave

  • I downloaded the trial and can't find it. How do I download pictures and get started.

    I downloaded the trial and can't find it. How do I download pictures and get started.

    What can't you find, the downloaded installer, or the installed program?
    What pictures you want to download?
    What is your operating system?

  • How do you make room on your start up disk.  i am trying to do the update but don't have enough space

    how do you make room on your start up disk.  i am trying to do the update but don't have enough space

    Try this:
    1. Open "Finder", then navigate to "Movies" on the left side. Click on "iMovie Projects"
    2. Move desired movies and clips to trash, or your flash drive.
    *PS* Its dangerous to have a full hard drive, I would recommend either trashing, or transferring files to another computer. Trash applications you no longer use as well.

  • How do you change the day of the week on your calender starts on

    How do you change the day of the week your calender starts on??

    You would have to change the region settings to a country whose formatting starts the week on the day you like:
    iPhone User Guide (For iOS 5.0 Software)

  • When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

    When playing songs in iTunes playlist, How do you keep the next song from jumping to next song? I am working on song list updating other tracks info and then the next song starts and I lose my spot in song list?

    Max OSX 10.6.8, iTunes 11.1
    I had a similar problem: I wanted to synch my playlist to my iphone. I like to have my playlist sorted by genre. But under each genre, albums are not sorted by the track numbers. This is a problem, especially when I am listening to club mixes when the DJ smoothly transitions from 1 track sequentially to the next one. Under the properties of each audio file, the Track Numbers and Disc Numbers are already there.
    My perfect solution was to turn On Sorting - Sort Album under View>Show View Options. Then, select all the songs in that album (Shift click, Cmd click, etc) , and Edit multiple item information (Cmd I). You will see Info-Video-Sorting-Options buttons. Click on Sorting. Then, under Sort Album, Enter the name of the album. Then OK.
    You should now have the playlist sorted by Genre, then each album individually sorted by track numbers. On your playlist you should see, if you scroll right, the column added called "Sort Album".
    Hope this helps.

  • HT2513 How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled".

    How do you change the name of a reminder in the reminder list.  I right click and then choose "get information"  I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"

    Jerry,
    Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
    Hey presto, I've got the @ where it should be. Excellent.
    However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
    Very strange. I'll look at other keyboards and see where that gets me.
    Thanks,  Maz

  • Help! How do I know the Oracle daemon started on Linux.

    Dear Madem/Sir!
    I had installed the Oracle 9.2 on the Red Hat Linux 8.0 platform.
    But how do I know the Oracle Daemon started when the Linux startup?
    Please help me to figure out it!
    thanks and regards,
    Janus
    [email protected]

    A couple of ways, but easiest is to run the command "ps -ef" at a shell prompt. It will tell you which processes are running on your server. If oracle is running, you should see several oracle processes.
    You may also try running "sqlplus" and see if it will let you connect to the database. Generally, if you try to run SQL*Plus and the database is not started, you will get an error message to that effect.

  • How do I use the commands to start and restart the jmqbroker normally?

    How do I use the commands to start and restart the jmqbroker normally?
    Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
    "jmqbroker" to start up. My screen hangs up and seems that the process
    hangs up. The message is
    [28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
    [28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
    The prompt is hanged until I press CTRL-C.
    Then I got the following message:
    [28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
    [28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
    connections ....
    [28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
    [28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
    store...
    [28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
    up 0 files...
    [28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
    [28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
    Then, I use jmqadmin to invoke the console, I can start the broker
    again, it gives me
    Error encountered while connecting to the broker: "MyBroker":
    Broker Host: 'localhost'
    Primary Port: '7676'
    [C4003]: Error occurred on connection creation, - caught
    javax.jms.JMSException
    Please verify that there is a broker running on the specified host and
    port.
    I used ps -def | grep jmq there is no process anymore.
    Is it a bug? Would somebody have any idea on what went wrong?

    'jmqbroker' is the command to start a broker.
    When you type 'jmqbroker' in a command window,
    unless you put it in the background, the shell
    prompt won't return until the broker is shutdown.
    So when you see 'Broker "jmqbroker" ready.', it tells
    you that the broker is running and is ready.
    When you CTRL-C the process, it has the same effect
    as using jmqcmd to shutdown the broker. And so after that,
    there's no jmq processes running since you have just
    shutdown the broker.
    Remember that the jmqcmd/jmqadmin 'restart' command is to
    restart an already running broker. jmcmd/jmqadmin does
    not support starting a new broker instance.
    If you are using csh, end the jmqcmd command with an ampersand ("&")
    to have the broker running in the background. An alternative is to
    stop the process with Ctrl-Z then input the command "bg" to have that
    process resumed in the background.
    The problem with not being able to start a broker using the
    administration console is a documented limitation of the product that
    Yvonne also mentioned. Check the Administrator's Guide for that.

  • I am new to Muse so I am following the tutorial for Katie's Cafe.  I downloaded the sample files.  The problem is not all the files are in the folder as are on the tutorial.  The colour sample for instance is not there.  The CC Getting Started Katies.muli

    I am new to Muse so I am following the tutorial for Katie's Cafe.  I downloaded the sample files.  The problem is not all the files are in the folder as are on the tutorial.  The colour sample for instance is not there.  The CC Getting Started Katies.mulib file is also not there so you cannot automatically download all the necessary library files.  Can anyone help?

    found it in another area
    Where do I find the cc getting started Katies.mulib File ?

  • How do I change the table to start from right to left

    How do I change the table to start from right to left

    iWork apps have bugs that make them unsuitable for RTL scripts in various ways.  You might be better off using a different app if your work has a lot of RTL text.

  • How do I fix the msg, "Your Start up Disk is Full"?

    How do I fix the message, "Your Start Up Disk is Full" on my 4 yr old macbook?

    Freeing Up Space on The Hard Drive
    See Lion's Storage Display.
    You can remove data from your Home folder except for the /Home/Library/ folder.
    Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
    Also see Freeing space on your Mac OS X startup disk.
    See Where did my Disk Space go?.
    See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.

  • From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    From two given tables, how do you fetch the values from two columns using values from one column(get values from col.A if col.A is not null and get values from col.B if col.A is null)?

    Hi,
    Use NVL or COALESCE:
    NVL (col_a, col_b)
    Returns col_a if col_a is not NULL; otherwise, it returns col_b.
    Col_a and col_b must have similar (if not identical) datatypes; for example, if col_a is a DATE, then col_b can be another DATE or it can be a TIMESTAMP, but it can't be a VARCHAR2.
    For more about NVL and COALESCE, see the SQL Language manual: http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions119.htm#sthref1310
    I hope this answers your question.
    If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
    Explain, using specific examples, how you get those results from that data.
    Always say which version of Oracle you're using (e.g., 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • I have a Verizon IPhone 4 and i can't figure out how to get my ringtones from an app to my iTunes account, it doesn't have a tab for Ringtones! I have tried unplugging it and checking if would show up but it didn't, how do you enable the ringtone folder?

    I have a verizon IPhone and i can't figure out how to get my ringtones from the app to iTunes, my account doesn't have a ringtone section in the liRingtone Folder?brary, how do you enable the ringtone folder?

    Edit > Preferences.  Select the check box for Ringtones, this will add them to the listing in iTunes. 
    Not sure that really answers your question though.

Maybe you are looking for

  • Font installation leads to change in Page Size

    Hi Everyone, I'm using Crystal Reports to generate PDF reports and encountered a couple of issues. Firstly, I was unable to get the Crystal SDK to format the report in the manner I expected. The text that was configured to be displayed in bold font w

  • *.AS linkage in project

    Hello, I'm migrating from AS2 to AS3 and since there are so many changes I decided to start applying some good practices like the use of classes instead of code in timeline. I have one FLA (container) that imports some AS files (with classes, functio

  • String size limit??

    Hello all, In my applet i am returning a very large string from remote method. when my applet calls remote method,it hangs there.it doesnt execute any action after that. i dont even get any error message. what could be the reason of tat?

  • Can't Add Broker- Backup master broker??

    Hi, I have just installed sun one message queue PE 3.0 on a new box. I activated the license to try out the enterprise edition. I then try to add a broker through the admin console and receive the following error in the DOS Administration screen. Exc

  • Simple interceptor won't invoke

    Hi, I'm trying to implement my first interceptor in EJB3 (in glassfish v3 final and netbeans 6.8) but the method wont invoke. I have checked the syntax a number of times and I can't see what's going wrong. Can anyone help? The class using the interce